Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
This handset is an accessory handset for use with Panasonic base units KX-TG5561, KX-TG5566, KX-TG5571, KX-TG5576, and KX-TG5583. You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base unit’s operating instructions for further details. Charge the battery for 6 hours before initial use. Please read this Installation Manual before using the unit and save for future reference. PQQX14420YA DM0205MK2045 Accessory information To order replacement accessories, call 1-800-332-5368. TTY users (hearing or speech impaired users) can call 1-866-605-1277. Included accessories Order number Quantity KX-TGA550 KX-TGA552 Charger PQLV30030ZM 1 1 AC adaptor for charger KX-TCA1-G 1 1 Battery HHR-P104 1 1 Handset cover PQYNTG5432MR 1 1 Belt clip PQKE10396Z2 1 1 USB cable PQJA10166Z – 1 CD-ROM PQJKTG5576Z – 1 Connections To power outlet (120 V AC, 60 Hz) AC adaptor Note: L Use only the included Panasonic AC adaptor KX-TCA1. L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. For assistance, please visit Battery installation 1 Insert the battery (1), and press it down until it snaps into the compartment (2). 2 Close the handset cover. 12 Attention: A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Battery charge Place the handset on the charger for 6 hours before initial use. L The unit will beep once, the CHARGE indicator will light, and “Charging” will be displayed. L “Charge completed” is displayed when the battery has been fully charged. The CHARGE indicator will remain lit. CHARGE indicator Note: L To ensure the battery charges properly, clean the charge contacts of the handset and charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust, or high humidity. Recharging the battery Recharge the battery when: –“Recharge battery” is displayed or 3 flashes on the handset display. – the handset beeps intermittently while it is in use. Note: L If the battery has been discharged, the handset will display “Charge for 6 HRS” and 4 when you place the handset on the charger. For assistance, please visit Battery performance After your Panasonic battery is fully charged, you can expect the following performance: Operation Operating time While in use Up to 5 hours (talking) While not in use (standby)*1 Up to 11 days While using the Up to 3 hours clarity booster feature *1 Handset is off the charger but not in use. Registration Register the handset to a KX-TG5561/KXTG5566/ KX-TG5571/KX-TG5576/KXTG5583 base unit. Important: L Charge the battery fully. L Before registering, make sure the base unit and the other handsets are not being used. L Have the handset and base unit near each other when registering the handset. 1 Base unit: Press and hold {INTERCOM} until the CHARGE indicator flashes. L After the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute. 2 Handset: Press {OK} (right soft key), then wait until the handset beeps. L Registration is complete. L The handset’s extension number (! to )) will be displayed. Note: L To cancel the handset registration, please see your base unit’s operating instructions. Changing the display language 1 Press {MENU} (center of joystick), then press {#} {1}{1}{0}. 2 Press {1} to select English. Press {2} to select Spanish. 3 Press {SAVE} or {GUARDAR}, then press {OFF}. Belt clip You can hang the handset on your belt or pocket using the included belt clip. To attach the belt clip To remove the belt clip While pressing the top of the clip (1), pull the right edge in the direction of the arrow (2). 1 2 For assistance, please visit Headset (optional) Connecting an optional headset to the handset allows hands-free phone conversations. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA, KXTCA91, KX-TCA92, or KX-TCA98 headset. See page 2 for ordering information. To connect an optional headset to the handset Headset jack L Model shown is KX-TCA86. Wall mounting The charger can be wall mounted, as shown below. 1 Connect the AC adaptor. 2 Drive the screws (not included) into the wall using the wall mount template (see below). 3 Mount the charger (1), then slide it down (2) and to the right (3) until it is secure. 12325.4 mm Screws To power outlet (1") Wall mount template 25.4 mm (1") For assistance, please visit FCC and other informati...