Оценок - 5, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The handset will ring at the low level for intercom calls. Handset ringer tone You can change the ringer tone heard when an outside call is received. There are 3 tones and 4 melodies. The default setting is “Tone 1”. 1 Press {MENU}. 2 Scroll to “Ringer setting” by pressing {V} or {^}, then press {>}. Ringer setting 3 Scroll to “Ringer tone” by pressing {V} or {^}, then press {>}. Ringer tone 4 Press {V} or {^} repeatedly to select the desired setting. Ringer tone 1=Tone 1 KBack dB SaveL L You can also select the ringer tone by pressing {1} to {7}. L If the ringer volume has been turned off, the handset will not ring. 5 Press {Save}, then press {OFF}. Note: L If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (Tone 1 to 3). If you select a melody, you will not be able to distinguish lines by their ringers. L If you select one of the melody ringer patterns, the ringer will continue to sound for several seconds if: – the caller hangs up before you answer the call. – another person answers the call using another phone connected on the same line. For assistance, please call 1-800-211-PANA (7262). Handset interrupt tone (KXTG5422 and KX-TG5423 only) This tone lets you know when you receive a call while you are on an intercom call (page 30). “2” (default): The tone will sound 2 times. “On”: The tone will sound for as long as the line rings. “Off”: Turns this feature off. 1 Press {MENU}. 2 Scroll to “Ringer setting” by pressing {V} or {^}, then press {>}. 3 Scroll to “Interrupt tone” by pressing {V} or {^}, then press {>}. 4 Press {V} or {^} repeatedly to select the desired setting. 5 Press {Save}, then press {OFF}. Programmable Settings Call options Auto talk When this feature is turned on, you can answer a call by lifting the handset off the base unit or charger without pressing {C}. The default setting is OFF. 1 Press {MENU}. 2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}. 3 Scroll to “Auto talk” by pressing {V} or {^}, then press {>}. 4 Press {V} or {^} repeatedly to select the desired setting. 5 Press {Save}, then press {OFF}. Note: L If you subscribe to Caller ID service and want to view the caller’s information on the handset display after lifting up the handset to answer a call, turn off this feature. For assistance, please call 1-800-211-PANA (7262). Programmable Settings Voice enhancer You can turn the voice enhancer feature on or off. The default setting is OFF. 1 Press {MENU}. 2 Scroll to “Voice enhancer” by pressing {V} or {^}, then press {>}. 3 Press {V} or {^} repeatedly to select “On” or “Off”. 4 Press {Save}, then press {OFF}. L When turned on, “J” will be displayed. Caller ID edit You can turn the Caller ID number auto edit feature (page 27) on or off. The default setting is ON. 1 Press {MENU}. 2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}. 3 Scroll to “Caller ID edit” by pressing {V} or {^}, then press {>}. 4 Press {V} or {^} repeatedly to select “On” or “Off”. 5 Press {Save}, then press {OFF}. Display options Handset LCD contrast You can adjust the handset display contrast. There are 6 levels. The default setting is level 3. 1 Press {MENU}. 2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}. 3 Scroll to “LCD contrast” by pressing {V} or {^}, then press {>}. 4 Press {V} or {^} repeatedly to select the desired setting. 5 Press {Save}, then press {OFF}. Display language You can select either “English” (default) or “Espanol” as the display language. 1 Press {MENU}. 2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}. 3 Scroll to “Change language” by pressing {V} or {^}, then press {>}. 4 Press {V} or {^} repeatedly to select the desired language. L You can also select by pressing {English} or {Espanol}. 5 Press {Save} or {Salvar}, then press {OFF}. Note: L If you select a language you cannot read, press {MENU}{0}{8}{1}{Save} to change the display language to English. For assistance, please call 1-800-211-PANA (7262). Telephone settings Dialing mode If you cannot make calls, change this setting depending on your telephone line service. “Tone” (default): For tone dial service. “Pulse”: For rotary pulse dial service. 1 Press {MENU}. 2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}. 3 Scroll to “Set tel line” by pressing {V} or {^}, then press {>}. 4 Scroll to “Set dial mode” by pressing {V} or {^}, then press {>}. 5 Press {V} or {^} repeatedly to select the desired setting. 6 Press {Save}, then press {OFF}. Flash time The flash time depends on your telephone exchange or host PBX. You can select: “90ms” (milliseconds), “100ms”, “110ms”, “250ms”, “300ms”, “400ms”, “600ms”, or “700ms” (default). 1 Press {MENU}. 2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}. 3 Scroll to “Set tel line” by pressing {V} or {^}, then press {>}. 4 Scroll to “Set flash time” by pressing {V} or {^}, then press {>}. 5 Press {V} or {^} repeatedly to select the desired setting. 6...