Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
LWhen a function does not appear above a soft key, the soft key has no function. Rcvd Phone Kcalls book L Soft key examples: Display function Action Rcvd calls Enters caller list VM Dials Voice Mail access number Backlit display and handset keypad The handset display and the dialing buttons will light for a few seconds after pressing any of the handset’s controls or lifting the handset off the base unit. They will also light when a call is being received. Setting the unit before use Setting the dialing mode If you cannot make calls, change this setting depending on your telephone line service. “Tone” (default): For tone dial service. “Pulse”: For rotary pulse dial service. 1 Press {MENU}. 2 Scroll to “Initial setting” by pressing {V}or {^}, then press {Select}. 3 Scroll to “Set tel line” by pressing {V}or {^}, then press {Select}. 4 Scroll to “Set dial mode” by pressing {V}or {^}, then press {Select}. 5 Press {V}or {^} repeatedly to select the desired setting. 6 Press {Save}, then press {OFF}. For assistance, please visit 19 Making/Answering Calls Making calls Soft keys {OFF} {C} Navigator key {s} {MENU} {*} {REDIAL} {HOLD} {PAUSE} Microphone 1 Lift the handset and press {C}. LAn available line is automatically selected and the line is displayed (to change the line selection, see page 40). LYou can select a line by pressing {Line1}or {Line2}, instead of pressing {C}. L“Talk” will be displayed. 2 Dial the phone number. 3 When finished talking, press {OFF}or place the handset on the base unit. Note: Lk and l show the status of each line (page 18). To adjust the receiver volume 3 levels (high/medium/low) are available. While using the receiver, press {V}or {^} repeatedly. To use the speakerphone 1 Lift the handset and press {s}. L“SP-phone” will be displayed. 2 Dial the phone number. 3 When the other party answers, speak into the microphone. 4 When finished talking, press {OFF}or place the handset on the base unit. Note: LTalk alternately with the caller in a quiet room. LIf the other party has difficulty hearing you, press {V}to decrease the speaker volume. LWhile on a call, you can switch from the receiver to the speakerphone by pressing {s}. To switch back to the receiver, press {C}. To adjust the speaker volume 6 levels (high to low) are available. While using the speaker, press {V}or {^} repeatedly. To dial after confirming the entered number 1 Enter the phone number. Example: 3334444 KClear CallL LTo correct a digit, press {Clear}. Enter the correct number. LIf a pause is required when dialing, press {PAUSE}where needed (page 24). LTo cancel, press {OFF}. 2 Press {C}or {s}. LYou can select a line by pressing {Call} then pressing {Line1}or {Line2}. 20 For assistance, please visit Making/Answering Calls 3 When finished talking, press {OFF}or place the handset on the base unit. To redial the last number dialed 1 Press {C}or {s}. LYou can select a line by pressing {Line1}or {Line2}, instead of pressing {C}or {s}. 2 Press {REDIAL}. To make a call using the redial list The last 5 phone numbers dialed are stored in the redial list. 1 Press {REDIAL}. LThe last number dialed will be displayed. 2 Press {V}or {^} repeatedly to display the desired number. LTo delete the displayed number, press {Erase}. LTo exit the list, press {OFF}. 3 Press {C}or {s}. LYou can select a line by pressing {Call} then pressing {Line1}or {Line2}. Answering calls When a call is being received, the called line and the ringer indicator flashes rapidly. 1 Lift the handset and press {C}or {s}. LThe called line is automatically selected. To change the line selection, see page 40. LYou can also answer a call by pressing the called line’s soft key ({Line1}or {Line2}). LYou can also answer a call by pressing any button except {V}, {^}, or {OFF}. (Any key talk feature) 2 When finished talking, press {OFF}or place the handset on the base unit. Auto talk This feature allows you to answer a call by simply lifting the handset off the base unit. You do not need to press {C}. To activate this feature, see page 37. Note: LThe called line is automatically selected. To change the line selection, see page 40. Temporary ringer off While the handset is ringing for an outside call, you can turn the ringer off temporarily by pressing {OFF}. The handset will ring the next time a call is received. For assistance, please visit 21 Making/Answering Calls Using the other line during a conversation When you are on a call and another call is received on the other line, you will hear 2 tones (page 37), and the line indicator on the base unit will flash rapidly. You can answer the 2nd call while holding the 1st call. You can also make another call without finishing the 1st call. LIf you subscribe to Caller ID service, the 2nd caller’s information will be displayed when a call is being received on the other line (page 29). To hang up the 2nd call and...