Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
•When you replace the battery, the selected ringer volume setting will return to the factory set (HIGH). Reprogram if necessary. With the base unit To select HIGH (preset) or LOW, press (MUTE/RINGER). •Each time you press the button, the ringer volume will change and ring. To turn the ringer OFF, press and hold (MUTE/RINGER) until 2 beeps sound. To turn the ringer ON, press (MUTE/RINGER). •The ringer will sound at the HIGH level. Ringer Tone You can select the handset or the base unit ringer tone out of 6 patterns. When an incoming call is being received, the unit rings in the selected tone. Your phone comes from the factory set to 1. Make sure the unit is not being used and the handset is lifted off the base unit. With the handset 1 1 Press (FUNCTION). 2 2 Scroll to “Ringer tone” by pressing O or N. 3 3 Press a. •The current setting is displayed. 4 4 Select the desired ringer tone by pressing O or N. •Each time you press O or N, the ringer tone will change and ring. •You can also select the ringer tone by pressing dialing buttons (1) to (6). •If you set the ringer volume to OFF, the handset will not ring (p. 18). 5 5 Press a (Save key). •A beep sounds. •To exit the programming mode, press (OFF). Ringer volume HRinger tone Program Ringer tone :1 GF H=Save Ringer tone :3 GF H=Save Ringer tone :3 Preparation •You can exit the programming mode any time by pressing (OFF). With the base unit Press (MUTE/RINGER). •The base unit rings in the current setting. 2 2 Within 5 seconds, select the desired ringer pattern by pressing dialing buttons (1) to (6). •Each time you press the buttons, the ringer pattern will change and ring. 19 For assistance, please call: 1-800-211-PANA(7262) Programmable Functions LCD Contrast You can program the handset LCD contrast (5 levels). To make the handset display clearer, set to high level. Your phone comes from the factory set to level 3. Make sure the unit is not being used and the handset is lifted off the base unit. 1 1 Press (FUNCTION). 2 2 Scroll to “Program” by pressing O or N. Ringer tone HProgram 3 3 Press a. 4 4 Scroll to “LCD contrast” by pressing O CallerID edit or N. HLCD contrast 5 5 Press a. LCD contrast Low ... High GF H=Save 6 6 Select the desired contrast by pressing O or N. •Each time you press O or N, the LCD contrast will change. 7 7 Press a (Save key). LCD contrast Low . High •A beep sounds. •To exit the programming mode, press (OFF). •You can exit the programming mode any time by pressing (OFF). Making Calls Handset Display (OFF) , , (HOLD/INTERCOM/CLEAR) (REDIAL/PAUSE) Microphone 1 1 Press . Back side Speaker Talk V.E. Talk V.E. 1112222 Talk V.E. 00-00-00 Off V.E. 00-01-08 2 2 Dial a phone number. •The dialed number is displayed. •After a few seconds, the display will show the length of the call and the battery strength. 3 3 To hang up, press (OFF) or place the handset on the base unit. •If the handset has lost communication with the base unit, 3 beeps sound and “No link to base Place on cradle and try again.” is displayed. Basic 21 For assistance, please call: 1-800-211-PANA(7262) Making Calls To have a hands-free phone conversation (Using Digital Duplex Speakerphone) 1 1 Press . 2 2 Dial a phone number. •The dialed number is displayed. •After a few seconds, the display will show the length of the call and the battery strength. 3 3 When the other party answers, talk into the microphone. 4 4 To hang up, press (OFF) or place the Off V.E. handset on the base unit. 00-01-08 •If the handset has lost communication with the base unit, 3 beeps sound and “No link to base Place on cradle and try again.” is displayed. SP-phone V.E. SP-phone V.E. 1112222 SP-phone V.E. 00-00-00 Hands-free Digital Duplex Speakerphone For best performance, please note the following: •Talk alternately with the caller in a quiet room. •If the other party has difficulty hearing you, press O to decrease the speaker volume. •If the other party’s voice from the speaker cuts in/out during a conversation, press O to decrease the speaker volume. •While talking using , you can switch to the hands-free phone conversation by pressing . To switch back to the receiver, press . If noise interferes with the conversation Press U to select a clearer channel in the talk, speakerphone or intercom mode, or move closer to the base unit. To dial after confirming the entered number 1 Dial a phone number. •If you misdial, press (HOLD/INTERCOM/CLEAR). One digit is erased. Dial the correct phone number. •To cancel, press (OFF). 2 Press . OR To have a hands-free phone conversation, press , and when the other party answers, talk into the microphone. •After a few seconds, the display will show the length of the call and the battery strength. 3334444 Ex. 3334444 Ex. Talk V.E. 3334444 Talk V.E. 00-00-00 3 3 To hang up, press (OFF) or place the handset on the base unit. To redial the last number dialed on the handset Press or and press (REDIAL/PAUSE). To redial using the redial list (Memory Redial) The last 5 phone numbers ...