Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Now you can install your new Cobra INTENNA cordless phone virtually anywhere. Without cumbersome external antennas to worry about, put your new phone anywhere a corded phone can go! Then enjoy the freedom of using your new cordless phone all over the house as well as outside in your yard. Your new Cobra Model CP-705 is also the most technologically advanced cordless phone in Cobra’s new INTENNA series. It has ten selectable channels (the maximum number available) for optimum interference-free use. And its patented Cobra Clear Call® PLUS Circuitry with compander noise-reduction system ensures corded-phone sound quality. Please take a moment to review this booklet and become familiar with all of the many user-friendly convenience features built into your new Cobra INTENNA Cordless Phone. If you need further assistance installing or using your new phone, please call our toll-free consumer “hotline” at 1-800-COBRA 22 between 8:30 a.m. and 5:00 p.m. (Central Time) Monday through Friday. Installation Information Your Cobra INTENNA Cordless Telephone without any external base or handset antennas offers many new installation choices compared to traditional cordless phones with telescopic antennas. Your new phone can be located under cabinets, next to lamps, on crowded countertops and in other tight spaces that were previously inaccessible to cordless phones. Maximum range is obtained by installing the base unit in the highest living area of your home. The location you choose must be near an electrical outlet and a telephone wall jack. (To minimize electrical interference, avoid plugging your cordless phone into the same electrical outlet that has a charging unit for a cordless vacuum, screwdriver or other electronic device.) (1) Installation ) • Never install telephone • Never install telephone jacks in wet locations unless the is specifically designed for wet locations. • Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the interface. • Use caution when installing or modifying telephone Quick Set-Up Guide The following basic steps enable quick and easy installation of your new Cobra INTENNA cordless phone for use on a desk or countertop. You are encouraged to review this complete instruction manual to become operating instructions and features of your new phone. NOTE: Before using, connect your new phone to AC power — see instruction below — to charge it overnight (at least 12 hours) for optimum conditioning of the rechargeable batteries inside the cordless handset. • Insert the round connector of the power adapter into the POWER jack (at the rear of the cordless phone’s base; see diagram #1 below) and plug the power adapter into a standard 110V household electrical outlet. Then place the handset into the base so the CHARGE indicator lights. Pulse/Tone Switch AC Power Jack OFF ON P T RINGER PULSE/ POWER TONE 9VDC Diagram #1: Ringer Connecting On/Off Switch your phone's AC power adapter cord STOP: Charge your phone overnight before proceeding with installation. • After charging, remove the twist-tie from the phone cord and plug the modular telephone connector into the phone jack on your wall. • Make sure that the RINGER switch is ON (located at the rear of the base). • Set the PULSE/TONE switch (also at the rear of the base) for proper operation (see page 7 for details). (2) Wall Mounting The following steps enable new or existing telephone mounting plate or onto a wall. (Your Cobra INTENNA is designed to be used with any AT&T, GTE, local phone company or other wall-mounting plates that can be purchased from most local • Plug modular phone connector jack. • Align mounting studs on the plate base; push base onto studs and on the wall plate. Modular Phone Jack Diagram #2: Installation on a telephone wall-mounting plate Mounting Studs • Wrap doubled cord around bottom of base. Cord can be hidden between bottom of base and wall-mounting plate. • Attach the power adapter to the POWER connection (on the base of the phone) and plug into a household AC power outlet. • To install directly on any wall, you’ll need to provide two screws and wall anchors; follow these steps: — Drill two holes 3 1/4” apart and insert the wall anchors. — Drive the screws into the anchors until the head of each screw is protruding about 1/8” from the wall. — Align the holes in the cordless base over the screw heads; push base in and slide down on screws (see diagram #3). — Plug modular phone connector into telephone wall jack; attach the power adapter to the POWER connection (on the base of the phone) and plug into to a household AC power outlet. Modular Phone Jack Screw Heads Diagram #3: Installation directly on a wall (3) Using Your Phone After charging the handset (at least use your Cobra INTENNA cordless phone corded phone. With Cobra’s AUTO STANDBY feature, just the handset up to or place a call. ANSWERING/PLACING CALLS AT THE BASE WITH “AUTO STANDBY” and "AUTO ANSWER" • Activate AUTO ST...