Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
2. After 12 hours ,remove the HANDSET from the BASE UNIT. 3. Raise or reposition the BASE UNIT ANTENNA for the best reception. NOTE: Depending on the frequency of use, once the HANDSET is fully charged , it remains functional for approximately 4 hours of continuous use and approximately three days when the HANDSET is off the BASE UNIT in STANDBY mode. Receiving calls 1. When the phone rings, lift the HANDSET and press the button. The HANDSET LCD Screen will display "CALLS" and "TALK",and the BASE UNIT IN USE LED indicator will light up. 2. Start your conversation 3. To end your conversation, either press the button or place the HANDSET on the BASE UNIT. If you place the HANDSET on the BASE UNIT CHARGE CRADLE, you activate the automatic STANDBY feature. NOTES: 1. The Call Timer will start to count once you press the button. 2. The LCD Screen emits light for 8 seconds every time you press any of the TELEPHONE KEYPAD buttons. Cordless Telephone Operation 8 CALLS When "CALLS"appears on the LCD Screen, it means the HANDSET IS OFF-HOOK (connected to the telephone line). Minutes Call Timer Display Seconds or Channel (Press the scan/del button to display the channel). CALLS TALK AM # # TORAL AM # # TORAL AM # # TORAL AM # # TORAL AM # # TORAL Function Operation This unit contains the following special functions: A. LANGUAGE F. AREA CODE B. FIRST RING ON/OFF G. FLASH TIME C. TIME SET H. PAUSE TIME D. RINGER VOLUME I. VOICE MAIL E. LCD CONTRAST J. MSG WAITING Caller ID System Operation 19 AM # # TORAL AM # # AM # # TORAL AM # # TORAL TORAL AM # # TORAL KEYPAD Button KEYPAD Button KEYPAD Button KEYPAD Button KEYPAD Button KEYPAD Button KEYPAD Button KEYPAD Button KEYPAD Button KEYPAD Button To access, press the button and hold down while in STANDBY mode, then press the TELEPHONE KEYPAD buttons or the SCROLL DOWN button. / VOICE MAIL Cordless Telephone Operation Placing Calls 1. Press the button, the Call Timer starts to count. The HANDSET LCD Screen will display "CALLS " and "TALK ", and the BASE UNIT IN USE LED indicator will light up. 2. Listen for a dial tone. 3. Dial the phone number. 4. When you have finished your call, press the button again or place the HANDSET on the BASE UNIT. NOTE: You can pre-Dial the phone number before you press the button. The number displayed will be dialed once is pressed. 9 Caller ID System Operation 18 AM TOTAL 1. Press the button to enter the phone book list. (If the phone book is not full, the LCD screen will disply "NEWDATA", press scroll UP or DOWN to enter the phone book list) 2. Press and hold down the , the LCD screen will display "ERASE ALL" 3. Press again, the LCD Screen will display "ALL ERASED",and then return to the idle display. Selective Deleting in the PHONE BOOK 1. Press the button. 2. Press the SCROLL UP or DOWN button to find the record you want to delete. 3. Press button, the LCD Screen will display the "ERASE ITEM" # # TOTAL Deleting All Records in the PHONE BOOK 5. Press the button to return to STANDBY mode. 4. The record will be deleted if you press button again, and the LCD Screen will display the next record. CALLS FLASH EDIT DIR RE/PA SAVE TALK DIR DIR DIR DEL /SCAN DEL /SCAN DEL /SCAN DEL /SCAN / VOICE MAIL TALK TALK TALK TALK TALK FLASH EDIT DIR RE/PA SAVE HEADSET L M H Cordless Telephone Operation Using the Headset Feature Your telephone can utilize a headset (not included) to be connected to your HANDSET for you to enjoy hands-free communication. Insert the small plug at the end of the headset into the HEADSET JACK at the right side of the HANDSET. Follow the procedures discussed in "Receiving Calls "and" Placing Calls" to receive and place a call. NOTE: When you plug the headset plug into the HEADSET JACK it automatically mutes the MICROPHONE and SPEAKER of the HANDSET. Unplug the headset to return the HANDSET to normal use. Redial Feature 1. If you get a busy tone, press the button or place the HANDSET on the BASE UNIT to hang up. 2. Later, press the button again. 3. Listen for a dial tone. 4. Press the button, this will automatically redial the last telephone number you called. 5. When you have finished with your call, press the button again or place the HANDSET on the BASE UNIT. NOTE: If you are too far away from the BASE UNIT, the HANDSET emits "beep"sounds to warn you that the Background noise level is too high for proper communication between the HANDSET and the BASE UNIT. When you hear this sound, you should move closer to the BASE UNIT to reduce the noise level. Otherwise, the call will automatically cut off. 10 HEADSET MICROPHONE SPEAKER HEADSET PLUG(2.5mm) HEADSET JACK TALK Caller ID System Operation 17 Placing Calls from the PHONE BOOK 1. Press the button. 2. Press the SCROLL UP or DOWN button to find the record you want to call. 3. Press the button to change the format of the displayed number. Available formats Include: Number of digits Ten digits Seven digits Eleven digits Explanation Example 3-digit area code+ 7-digit telephone number. 7-di...
Эта инструкция также подходит к моделям:Радиотелефоны - 730901-TP2-27F (2.17 mb)
Радиотелефоны - 730901-TP2-27F (2.17 mb)
Радиотелефоны - 730901-TP2-27F (2.17 mb)
Радиотелефоны - 730901-TP2-27F (2.17 mb)