Войти:
Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации Bell Sports, модель DECT 6

Производитель: Bell Sports
Размер: 154.98 kb
Название файла: 0b0e0c9e-3c52-41eb-843a-e6ead9787112.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4. Press CID/UP until AUTO TALK is displayed. 5. Press MENU. 6. Use CID/UP to select between ON and OFF. 7. Press MENU. 13 Dial Mode Use this option to select TONE or PULSE dialing. The default setting is TONE. 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4. Press CID/UP until DIAL MODE is displayed. 5. Press MENU. 6. Use CID/UP to select between TONE and PULSE. 7. Press MENU. Backlight Time Use this option to change the time that the display is lighted after coming off hook or pressing a key. 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4. Press CID/UP until BACKLIGHT TIME is displayed. 5. Press MENU. 6. Use CID/UP to select a value between 5 seconds and 20 seconds. 7. Press MENU. 14 Telephone Features Receiving a Call When the phone rings, remove the handset from the base and press the green ANSWER button or the SPEAKER button to answer the call. You may toggle between normal mode and SPEAKER mode by pressing the ANSWER button. Note: If the phone is configured for AUTO TALK ON, you will be connected as soon as the handset is lifted from the base. Placing a Call To place a call, remove the phone from the base and press the green ANSWER button or the SPEAKER button. After you hear dial tone, dial the desired number. Predialing It is also possible to predial your numbers. To do this, enter the desired numbers first. The numbers will appear on the display and will be dialed out when you press the ANSWER button or SPEAKER button. Duration Timer A timer will start counting 6 seconds after you lift the handset or 6 seconds after you dial a telephone number. Ending a Call To end a call, either press the red HANG UP button or return the handset to the base. Dialing The 6012 is capable of either TONE or PULSE dialing. The default dialing mode is TONE. In almost all cases, that will be correct. To change the dialing mode, see the DIAL MODE section under the SETUP menu. 15 Ringer You may choose from 20 ring tones. Detailed instructions for selecting a ring tone are given in the PROFILE MENU section. Redial There are two ways to redial the last number dialed. To redial immediately, press the ANSWER button or the SPEAKER button, and then press the REDIAL button. To review the number before redialing, press the REDIAL button first. The number to be dialed will appear in the dislplay. To dial this number press the ANSWER button or the SPEAKER button. To remove digits from the displayed number, press the ESC/FLASH key. To cancel and return to the idle state, press the HANG UP button. Flash This telephone provides a line break signal for accessing PABX service or for use of Call Waiting from your local telephone company. If you have Call Waiting service, you can use the Call Waiting function per the following instructions. 1. While having a conversation, another party calls and you hear a tone. 2. Press ESC/FLASH once and release. The first conversation is placed on hold and the second call can be answered. 3. Press ESC/FLASH again and release. You may speak to the first caller again and the second call is placed on hold. Keypad Lock To lock the keypad, press and hold the # key for 2 seconds. A small key icon will appear in the display. To unlock, press and hold the # key again for 2 seconds. 16 Conference Call The 6012 can make a conference call between one outside party and two 6012 handsets registered to the same base. 1. Initiate a call to the outside party from one of the 6012 handsets. 2. Once the outside call is connected, press INT/TRF. 3. Dial the registration number of the second 6012 handset. 4. Once the second handset answers, press INT/TRF to create a conference call. Transfer The 6012 can transfer an outside call to any other handset registered to the same base. 1. Press INT/TRF. 2. Dial the registration number of the handset to receive the transferred call. 3. Hang up the phone or wait until the second handset answers and then hang up. Intercom Call The 6012 can make intercom calls between any 2 handsets registered to the same base. 1. Go off hook. 2. Press INT/TRF. 3. Dial the registration number of the handset to receive the intercom call. Volume Control During a call in either handset or speaker mode, you can press CID/UP to increase receive volume and CID/DOWN to decrease volume. 17 Profile Menu This menu allows you to set the tones made by the phone. HS Ringer Music This selects the ringer tone. Ring tones can be assigned for up to five different groups. Numbers placed in these groups will then ring with that tone. 1. Press MENU. 2. Press CID/UP until PROFILE is displayed. 3. Press MENU. 4. Press MENU. The DEFAULT GROUP will be displayed. 5. Press CID/UP until the desired group is displayed. 6. Press MENU. 7. The current MELODY for that group will be displayed. Press CID/ UP to select a melody. A sample of each melody will play as you step through them. 8. After the desired melody is displayed,...

Эта инструкция также подходит к моделям:
Радиотелефоны - DECT 6 (154.98 kb)
Радиотелефоны - DECT 6 (154.98 kb)
Радиотелефоны - DECT 6 (154.98 kb)
Радиотелефоны - DECT 6 (154.98 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории