Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
It is not suitable for connection to a PBX. The ringer equivalence numbers (RENs) of all instruments Do not clean any part of your Celestia connected to an exchange line must not add up to more than 4. 400 with solvent chemicals, abrasives or The Celestia 400 has a REN of 1; most other phones and fax spray cleaners which might get inside the machines have a REN of 1 unless marked otherwise. case and cause damage not covered by the guarantee. When necessary, clean it with a damp cloth. NOTE: if you disconnect the Celestia 400 from mains Keep your Celestia 400 away from hot, power, your time and date settings will be lost. However, humid conditions or strong sunlight. stored messages and Caller ID records will be retained. The Celestia 400 must be used with mains adapter, part no. XX002104D, supplied with the unit. Using any other adapter will result in non-compliance with EN41003, and will invalidate any approval given to this apparatus. page 3 USING To set the time the Celestia will answer a call, to SETTINGS Recording your outgoing message 1 Press and hold until you hear a ‘beep’ 2 Speak clearly into the microphone Your outgoing message (OGM) can seconds long. The display shows the speak. Do not pause for more than 10 seconds. 09:35 13-10 02/05AM MSG 00-32 -5 OGM REC To check your OGM at 3 Press the PLAY/PAUSE/STOP button when any time you have finished speaking The machine will ‘beep’ then play back your OGM. pausestop • Press Recording a memo 1 Press and hold memo until you hear a ‘beep’ 2 Speak clearly into the microphone 3 Press the PLAY/PAUSE/STOP button when you have finished speaking This shows the duration of recording 09:35 13-10 02/05AM MSG 00-32 -5 MSG REC Your memo will be stored as a new message. Switching the machine on and off . Press once — the machine says: ‘Answer on’ and the light comes on . Press again to switch the machine off Incoming calls When the OGM is playing to the When a call comes in, the caller’s ID is shown on the display caller, this appears (if you subscribe to the Caller ID service or equivalent). To answer an incoming call . Press while the phone is ringing You can converse with the caller in hands-free mode. Remember to speak clearly into the microphone 11:05 13-10 02/05AM MSG 02083448870 OGM PLY 16CALL # The caller’s ID (phone number) To intercept a call You can intercept a call which the machine has answered. . Press while the OGM is playing or while the caller is speaking The machine stops recording the caller’s message, and you can converse with the caller. 11:05 13-10 02/05AM MSG 01-03 OGM PLY UNAVAILABLE 16CALL # If the caller’s ID is unavailable (e.g. on NOTE: if you lift the handset of any phone connected to the an international call) ' UNAVAILABLE ' is shown; if the caller has withheld their same line as the Celestia 400, the machine will stop what it’s ID by dialling 1470, ‘ WITHHELD’ is shown. doing and free the line for you to speak to the caller. page 4 USING Message playback . Press the PLAY/PAU...
Эта инструкция также подходит к моделям:Радиотелефоны - binatone pegasys 400 (168.01 kb)
Радиотелефоны - binatone pegasys 400 (168.01 kb)
Наушники и микрофоны - binatone pegasys 400 (168.01 kb)
Радиотелефоны - binatone pegasys 400 (168.01 kb)