Оценок - 2, средний балл: 3 ( )

Производитель: Avaya Размер: 174.11 kb Название файла: 9125_manual.pdf Язык инструкции:

SPEAKERPHONE 1. Receiving Incoming Calls a. When the phone rings, press and release SPEAKER and speak normally into the built-in microphone from a distance of 5-6 inches. b. You can adjust the volume of the caller’s voice by pressing the Volume Buttons on the base of the telephone. c. After the conversation has finished, press and release SPEAKER to hang up. 2. Making A Call a. Press and release SPEAKER. b. When you hear a dial tone, dial the number or press a memory button. The number will appear on the display window. c. When your party answers, adjust the volume of the conversation by pressing the Volume Buttons on the base of the telephone. d. After the conversation has finished, press and release SPEAKER to hang up. Note: 1. If you wish to switch from speakerphone to handset, simply lift the handset. 2. If you wish to switch from handset to speakerphone, press and release SPEAKER and then hang up the handset. CALL TIMER Approximately 5 seconds after the beginning of a call, a call timer will appear on the display. 13 FEATURE BUTTONS END CALL BUTTON To end a conversation, press END CALL. In handset mode, the phone will go on-hook for 2 seconds and then go off hook again. This allows you to make another call. In speaker or headset mode, the phone will go on hook. MUTE BUTTON Press MUTE to speak without the person on the phone hearing your conversation. “MUTE” will show in the display. To resume the conversation, press MUTE. FLASH BUTTON This telephone provides a line break signal for accessing PABX services or for use of Call Waiting from your local telephone company. If you have Call Waiting service, you can use the Call Waiting function per the following instructions. 1. While having a conversation, another party calls and you hear a tone. 2. Press FLASH once and release. The first conversation is placed on hold and the second call can be answered. 3. Press FLASH again and release. You may speak to the first caller again and the second call is placed on hold. PAUSE BUTTON PAUSE allows you to insert a 3.6-second pause in the dialing sequence. This is particularly useful if you are connected to a PABX system where you must dial an access code (usually the number 9) to obtain an outside line. 1. Press PAUSE and release at any point in the dialing sequence where a pause is desired. 2. PAUSE can be pressed more than once to create a longer pause. CALL WAITING OFF When you come off hook and press this button, the 9125 will dial *70. This is a standard code to deactivate call waiting. For more information about call waiting, contact your telephone company. HEADSET BUTTON The 9125 supports headsets with a 2.5 mm plug. Be sure you have a headset connected to the headset jack before using the headset button. 1. Receiving Incoming Calls a. When the phone rings, press and release HEADSET and speak into the headset mic. b. You can adjust the volume of the caller’s voice by pressing the Volume Buttons on the base of the telephone. c. After the conversation has finished, press and release HEADSET to hang up. 14 2. Making A Call a. Press and release HEADSET. b. When you hear a dial tone, dial the number or press a memory button. The number will appear on the display window. c. When your party answers, adjust the volume of the conversation by pressing the Volume Buttons on the base of the telephone. d. After the conversation has finished, press and release HEADSET to hang up. Note: 1. If you wish to switch from headset to handset, simply lift the handset. 2. If you wish to switch from headset to speakerphone, press and release SPEAKER. HOLD BUTTON 1. Press HOLD and hang up the handset. HOLD will light and remain lighted until you resume your conversation. 2. To resume your conversation, lift the handset or that of any extension phone on the same line or press and release SPEAKER or HEADSET. The HOLD indicator will go out and your call can continue. MEMORY 1, MEMORY 2, and MEMORY 3 BUTTONS Frequently dialed numbers may be stored in these buttons. Follow the instructions below to store a number. Storing a number 1. Place the phone on hook. 2. Enter the number to be stored. 3. Press and hold the memory button until the display shows “SAVE OK.” Storing a Caller ID Record or Dialed Call 1. Place the phone on hook. 2. Use the 5 or 6key to display the desired number from incoming calls or dialed calls. 3. Press and hold the memory button until the display shows “SAVE OK.” Dialing a number 1. Come off hook. 2. Press MEMORY 1, MEMORY 2, or MEMORY 3. The number will be dialed out. REDIAL BUTTON 1. To redial the last number dialed, come off hook and press REDIAL. 2. The selected number (32 digits maximum) will be redialed. To review dialed numbers. 1. While on hook, press REDIAL. 2. The display will show the last number dialed. 3. Use 5 or 6 to scroll through the list of dialed numbers. The last 15 dialed numbers are stored. 4. To dial the displayed number, go off hook. The number will be dialed after approximately 3 seconds. 15 ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: