Оценок - 5, средний балл: 3.6
(
)
)
|
Фрагмент инструкции
Do not connect the Symphony extension to a payphone. The ringer equivalence numbers (RENs) of all instruments (phones, fax machines, etc.) connected to an exchange line must not add up to more than 4 — otherwise, one or more of them may not ring answer calls correctly. The Symphony 2210 telephones have a REN of 1 unless marked 3 Read these notes first Before you install your Symphony 2210 — Choosing a site for the base unit telephone and charger pod The base unit and charger pod(s) should be placed on a level surface, in a position where: the mains adapter plug will reach an easily accessible 230-V ACswitched mains supply socket — never try to lengthen the mains power cable the base unit’s telephone line cable will reach your telephone line socket or extension socket (the charger pod does not have a telephone line connection) it is not close to another telephone - this can cause radio interference it is not close to a sink, bath or shower, or anywhere else where it might get wet it is not close to other electrical equipment - fridges, washing machines, microwave ovens, fluorescent lights, TVs etc. Radio signals between handset and base unit To use your cordless handset and base unit together, you must be able to establish a radio link between them. Be aware that: Any large metal object or a filing cabinet - between the handset and the base unit telephone may block the radio signal. Other solid structures , like walls, may reduce the signal strength. Mains power connection IMPORTANT charger pod must be used with the mains adapters supplied. Using any other adapter will result in noncompliance with EN60950, and will invalidate any approval given to this apparatus. Color profile: Generic CMYK printer profile Composite Default screen - like a refrigerator, a mirror - The Symphony 2210 base unit and 4 Binatone Help Line: 0845 345 9677 (Local Call rate) Color profile: Generic CMYK printer profile Composite Default screen Installation and set-up 1 Choose a suitable site for the base unit telephone 3 Plug the mains adapter into a 230 V AC, 50 Hz mains socket, with the switch on the socket set to OFF, the socket- outlet Connect the mains power lead and the telephone line cord into the 2 Use the telephone line supplied with your don’t use any other telephone line cord cord See the note on page 4 See page 4 DECT Phone- back of the base unit need to be near the equipment and shall beeasily accessible. 4 Install the charger pod(s) … Plug the mains adapter into a 230 V AC, 50Hz mains socket, with the switch on the socket set to OFF, the socket- outlet need to be See the note on page 4 near the equipment and shall be easily accessible. 5 Installation and set-up The CHARGE light comes on The bars on the battery level symbol continuously change as the batteries are being charged Make sure the mains socket is switched on — the phone won’t work without electrical power Connect the base unit to the telephone line Switch off power at the mains socket. Insert the telephone line plug into the socket Switch mains 8 NOTE: the charger 7 Charge the batteries Before you use the cordless for the first time, it’s important to charge You hear a ‘beep’ when charging cradle. To keep the batteries charged, whenever you don’t need to use the handset (such as overnight, or when you go out), leave it on the base unit or charger pod. Leave the handsets on the 6 Fit the batteries in the cordless handsets batteries as shown Color profile: Generic CMYK printer profile Composite Default screen for 15 hours power back on base unit and chargerpod(s) for 15 hours. pod doesn't have a connection to the telephone line. A.Insert the three rechargeable the batteries fully. the handset is correctly placed on the B.Fit the battery compartment cover, sliding it into place and pressing firmly to make sure it is secure. handsets 5 Switch on at the mains socket(s) 6 Binatone Help Line: 0845 345 9677 (Local Call rate) DON'T use non-rechargeable batteries in the handset-they may bur st, causing damage. Use the rechargeable batteries supplied (1.2V AAA size 300mAh NiCd or 550mAh NiMH). - - + + + - Color profile: Generic CMYK printer profil e Composite Default screen Installation and set-up 9 If you have a Broadband line If you connect your telephone to a line with a broadband connection, you will need to insert a microfilter( not included) between the telephone and the telephone line, otherwise you may get interference between the telephone and the broadband, which could cause problems. In a home with broadband, every telephone must have a microfilter connected, not just the one at the telephone point that your modem is connected to. If you need more broadbank microfilters, contact your broadband supplier. 7 Color profile: Generic CMYK printer profile Composite Default screen Before you start Electrical safety Interference ‘Out of range’ warning 8 ¦ DON’T let the bas...
Эта инструкция также подходит к моделям:Радиотелефоны - SYMPHONY 2210 (1.77 mb)
Радиотелефоны - SYMPHONY 2210 (1.77 mb)
Радиотелефоны - SYMPHONY 2210 (1.77 mb)
Радиотелефоны - SYMPHONY 2210 (1.77 mb)