Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
• Set the receiver(s) channel switch to the same channel as the transmitter. • Turn the power/volume dial to turn the power ON. Wait a few seconds to see if you have a good signal. If the range indicator light blinks along with beeping, you are out of range. Move the receiver closer to the transmitter. SIDE VIEW Channel Switch • When sound is picked up by a receiver, the sound lights turn on. -One or two lights indicate quieter sounds. -Three or more lights indicate louder sounds. • If the range indicator begins fl ashing, you may be experiencing interference. Try selecting a different channel on both the receiver and transmitter. If the range indicator continues to fl ash, move the receiver closer to the transmitter. 10 Setup and Use Clock Nap Timer Clock Set • Turn receiver power ON. • Press and hold the start/stop button to choose 12-hour or 24-hour clock format. Press the reset button to make a choice. • Press the start/stop button . The hour number on the clock will fl ash. Press the reset button to scroll through hour choices. • Press the start/stop button . The minute numbers on the clock will fl ash. Press the reset button to scroll through minute choices. • Press the start/stop button to confi rm your selections and complete the clock setup. Receiver Battery Indicator Transmitter Battery Indicator Nightlight Indicator Nap Timer Clock Nap Timer Note: The nap timer will move to the top of the LCD screen when it is in use. • Press the start/stop button to start the nap timer. Press again to stop the time. • Press and hold the reset button to clear the timer. Battery Indicator • Displays the battery charge level of the receiver (1) and the transmitter (2). When battery power is low, the battery icon will appear partially fi lled. Nightlight Indicator • Indicates the transmitter nightlight is on. 11 Nightlight ButtonPower Button and L.E.D. Channel Switch• Place the transmitter in the same room with child. Point the microphone towards the crib or play area. Nightlight Button Power Button and L.E.D. Channel Switch Setup and Use Nightlight Timer SwitchNightlight Timer Switch Nightlight ButtonPower Button and L.E.D. Channel Switch• Place the transmitter in the same room with child. Point the microphone towards the crib or play area. Nightlight Button Power Button and L.E.D. Channel Switch Setup and Use Nightlight Timer SwitchNightlight Timer Switch • Set the transmitter channel switch to the same channel as the receiver(s). • Unwrap and fully extend the AC adaptor for best transmission. Insert the AC adaptor pin into the DC input jack on the transmitter and plug into a standard wall outlet. Use the AC adaptor only in a wall outlet. Do not plug into a ceiling outlet. Note: To use battery power, refer to the Battery Installation section. • Press the transmitter power button to turn the power ON. The power L.E.D. will light. • Press the nightlight button for a soft, glowing light. Press again to turn the nightlight off. • Slide the nightlight timer switch to turn the timer on. When the timer is on the nightlight will automatically shut off after 30 minutes. To turn the nightlight back on for another 30 minutes, simply press the nightlight button again. 12 Setup and Use Power/Volume Dial Range Indicator Sound Lights • Place a receiver where you can see and hear it. • To use AC power, unwrap and fully extend the AC adaptor cord for best reception. Insert the AC adaptor pin into the DC input jack on the receiver and plug into a standard wall outlet. Use the AC adaptor only in a wall outlet. Do not plug into a ceiling outlet. Note: To use battery power, refer to the Battery Installation section. • Turn the power/volume dial to turn the power ON. Turn the dial to adjust the volume to a comfortable listening level. • Clip the receiver onto your clothes to stay in touch with baby around your house or yard. Hint: The receiver’s range is up to 900 feet (274 m) away from the transmitter. The range indicator will fl ash and you will hear beeping when the receiver is out of range. 13 Problems & Solutions Problem Solution Receiver range indicator light flashes and you hear beeping Receiver is out of range of transmitter. Move receiver closer to transmitter. Note: Range varies depending on surrounding conditions such as noise levels, physical obstructions and signal interference. Channel switch on transmitter and receiver are not the same. Switch transmitter and receiver(s) to the same channel. Transmitter power is off. Turn transmitter power on. Batteries in receiver are weak or dead. Replace all batteries with three “AAA” (LR03) alkaline batteries or use the AC adaptor as a power source. No power to wall outlet and transmitter power is off. Make sure light switch that controls power flow to wall outlet is on. Power is off because circuit breaker for room is off. Make sure house fuses and circuit breakers are on. Receiver power L.E.D. does not light at all Receiver power is off. Turn receiver power on. Batteries in receive...