Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
POWER/AL RESET Press to power the clock radio off or on. After the alarm sounds, press to turn the alarm off until the set alarm time is reached again. SNOOZE/DIMMER Press to snooze the alarm after it sounds. Press to adjust the brightness of the LCD display. AL SET Press to view the alarm time. With the alarm time on display, press and hold to set the alarm time. LIGHT ON/OFF Press to turn the built-in light off or on. LIGHT ±/TIME± With the light turned on, press to adjust the brightness. Press to adjust the time when setting the clock or alarm. DC POWER INPUT 3.5mm LINE INPUT FM WIRE ANTENNA AM/FM Press to switch between AM and FM radio mode. CLK SET With the power off, press and hold to set the time. PM INDICATOR Lights when the current time is in the PM. AM/FM FREQUENCY DISPLAY AL BUZZ INDICATOR Lights when the alarm is on and set to buzzer. SLEEP Press repeatedly to set the sleep timer. Customer Support: 1-314-621-2881 GPX 7 TUNING Turn to adjust the AM or FM radio station. VOLUME Turn to adjust the volume. BATTERY BACKUP Requires 2, AAA-size, batteries (not included) 8 GPX Plug the included AC/DC power adapter into the DC POWER INPUT on the clock radio and a standard AC power outlet. Power The battery backup is intended for short power outages only. The clock radio’s primary functions cannot run off of the battery backup alone. Requires 2, AAA-size, batteries (not included) Battery Backup Setup setting the Clock Clock setting the Clock Clock 1. Press the PoWeR button to turn the clock radio off. 2. Press and hold the ClK seT button. The hour will begin to blink. 3. Press the lIGHT±/TIMe± buttons to adjust the hour. The PM indicator will light when the hour is set in the PM. 4. Press the ClK seT button. The minutes will begin to blink. 5. Press the lIGHT±/TIMe± buttons to adjust the minute. 6. Press the ClK seT button to finish setting the time. sleep Timer 1. Press the sleeP button repeatedly to set the sleep timer ( 90, 60, 45, 30, or OFF ). 2. Once the set sleep time has expired the clock radio will automatically power off. setting the Alarm snooze and Alarm Reset Alarm setting the Alarm snooze and Alarm Reset Alarm The alarm must be set at least 10 minutes before the actual alarm time is reached in order for the gradual light to turn on. 1. Press the Al seT button to view the alarm time. 2. Press and hold the Al seT button. The hour will begin to blink. 3. Press the lIGHT±/TIMe± buttons to adjust the hour. The PM indicator will light when the hour is set in the PM. 4. Press the Al seT button. The minutes will begin to blink. 5. Press the lIGHT±/TIMe± buttons to adjust the minute. 6. Press the Al seT button. The light will come on. 7. Press the lIGHT±/TIMe± buttons to set the brightness of the light when the alarm sounds. 8. Press the Al seT button. 9. Press the lIGHT±/TIMe± buttons to switch between Al RADIo and Al bUZZ. 10. Press the Al seT button to finish setting the alarm. 11. Once the set alarm time is reached, the alarm will sound. After the alarm sounds: Press the snooZe button to delay the alarm for an additional 9 minutes. OR Press the PoWeR/Al ReseT button to turn the alarm off until the set alarm time is reached again. Tuning the AM or FM Radio Radio & Line Input Tuning the AM or FM Radio Radio & Line Input 1. Press the PoWeR/Al ReseT button to turn the clock radio on. 2. Press the AM/FM button to switch between the AM and FM radio mode. 3. Turn the TUnInG dial to adjust the AM or FM radio station. Using the line Input Requires a 3.5mm line input cable (not included) 1. Use a 3.5mm line input cable to connect the lIne InPUT on the clock radio to an audio source, such as an MP3 player. 2. Press the PoWeR/Al ReseT button to turn the clock radio on. 3. Use the native controls on the connected audio source to play and pause audio through the clock radio. Green Initiative International support Company Information Green Initiative International support Company Information Environmental Commitment to ‘Protect for Today and Sustain for Tomorrow’ 2009 marked the official launch of DPI, Inc.’s corporate campaign for a greener and cleaner world. DPI is building upon environmental initiatives introduced at all of their facilities to help formulate and sustain significant and important conservation efforts within its manufacturing and marketing communities. In addition to targeting and selecting energy efficient product features, and structuring ‘green office’ procedures, other initial program efforts include: • Reduction of all packaging sizes • Recyclable plastics for clamshell packages, with a plan to eventually replace plastic with recyclable paper • Recycled fiber board in place of the polyfoam in packing boxes • Recycled plastics in place of the virgin material in product construction To download this User’s Guide in English, Spanish, or French, visit the support section at Para transferir esta guia de usuario en ingles, espanol, o frances, visite la seccion de la ayuda en www.gpx...
Эта инструкция также подходит к моделям:Радиоприемники - C280 (902.5 kb)