Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. BATTERY COMPARTMENT HEADPHONE JACK ADDITIONAL WARNINGS Additional Warnings FCC Warnings • The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. L’appareil ne doit pas etre expose aux ecoulements ou aux eclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit etre place sur l’objet. • Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. La prise du secteur ne doit pas etre obstruee ou doit etre facilement accessible pendant son utilisation. Pour etre completement deconnecte de l’alimentation d’entree, la prise doit etre debranchee du secteur. • Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Les piles ne doivent pas etre exposees a de forte chaleur, tel qu’a la lumiere du soleil, au feu ou autres choses de semblable. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CLOCK RADIO OPERATIONS Features Tuning the AM/FM Radio Setting the Alarm 1 Adjust the FM/AM switch to AM or FM radio band. 2 Adjust the VOLUME dial to an audible level. 3 Adjust the TUNING dial to the desired AM or FM radio station. • AM/FM radio • Analog volume control • Digital clock • Analog tuning control • DLL • LCD display • Stereo headphone jack • DC battery power: requires 2 AAA batteries (not included) 1 Turn the VOLUME dial to the OFF position. 2 Press and hold the ALARM button. 3 While holding the ALARM button, press the HOUR button to adjust the hour, and the MINUTE button to adjust the minute. The AM or PM INDICATOR on the display will illuminate when the time is set in the AM or PM. 4 Release the ALARM button. 5 Press the ALARM ON/OFF button to turn the alarm on. The ALARM INDICATOR on the display will illuminate when the alarm is turned on. 6 After the alarm sounds, press the ALARM ON/ OFF button to turn the alarm off. Setting the Clock 1 Turn the VOLUME dial to the OFF position. 2 Press and hold the TIME button. 3 While holding the TIME button, press the HOUR button to adjust the hour, and the MINUTE button to adjust the minute. The AM or PM INDICATOR on the display will illuminate when the time is set in the AM or PM. 4 Release the TIME button to finish setting the clock. Included • R300B • Armband • One set of stereo earbuds Power Insert 2 AAA batteries (not included) into the BATTERY COMPARTMENT. WARRANTY Limited 90 Day Warranty The Manufacturer warrants this product to the original purchaser to be free from defects in material and workmanship, under normal conditions, for a period of 90 days from date of original purchase...