Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
. . . . . . . . : Monday, May 12, 2008 7:05:37 PM Lease Expires . . . . . . . . . . . : Thursday, May 15, 2008 7:05:37 PM C:\Documents and Settings\Administrator> 4. Launch your Web browser and enter the Router’s Default Gateway address, (in the EN above example: 192.168.36.1 or 192.168.0.1) in the Address field that was found above and then press Enter. The address depends on whether the Enabler is configured as a Router or as an Access Point (AP) on your system. 5. When the below screen appears, enter admin for the User Name and leave the Password field blank, and then click OK. 6. The web-based utility's home page will be displayed. You can check the SSID and Security Type here. 7. Click LAN Settings from the left menu to view more configurations (such as IP address, Subnet Mask, etc.). 31 More information 8. Click Status from the left menu to view the 10. To view the Wireless Security configuration, current connection status. click Configure on the Wireless screen. 9. Click Wireless from the left menu to view the wireless settings. The SSID shows here must match the SSID of the radio. • A quick way to check the SSID on the radio: press , select Settings, select Network Setup, and then select Connection Info. • In order for the W-Fi Enabler to communicate with the Radio, 1) SSID, 2) Wireless Security Type, and 3) Passphrase must match on both the AR Wi-Fi Enabler and the radio. • The SSID on the Enabler can be found on the white label on the side of the Enabler. • A quick way to check the SSID on the radio: press , select Settings, select Network Setup, and then select Connection Info. • The wireless security type on the Enabler should be set to WPA-PSK. This security type must match the security type on the radio (WPA). Refer to page 29-30 for more information. • The Passphrase can be found on the white label on the side of the Wi-Fi Enabler and it needs to match the password/key on the radio. Refer to page 29-30 for more information. • This screen also shows the Wireless channel that the Enabler is broadcasting on. The default Channel number is set to Auto. In some cases, if there are other wireless networks operating in near proximity on the same channel, the Auto channel mode may not work as expected and Auto may need to be changed to another channel. In the above example the channel was changed from Auto to Channel 6. 32 More information Copyright warning This player is for your personal use only. EN Unauthorized recording or duplication of copyrighted material may infringe upon the rights of third parties and may be contrary to copyright laws. Check for updates Visit for the latest news and firmware upgrades for our Wi-Fi Internet Radio. Technical specification Product: Wi-Fi Internet Radio Brand: Acoustic Research Model: ARIRC200, ARIRC205 Electrical Consumption: 13W Specifications Hardware • Dimensions: 212 mm H, 94 mm W, 154 mm D • Unit Weight: 790 g (27.9oz) (without batteries) • Standards: IEEE 802.11g and 802.11b • Channels: 11 Wi-Fi Channels (US, Canada) • Ethernet Port (ARIRC200 only): 10/100 RJ-45 compatible • Power: External 9.0V DC 1.56A • Battery Backup: 3 X AAA Size Batteries • Display: 2.7" Backlight LCD • LEDS: On/Standby, two for navigation keys, Love it. • Internal memory: 512 MB • Stereo Headphones jack • USB Connection Jack AM Tuner section • Tuning Range: 520KHz to 1710KHz FM Tuner section • Tuning Range: 87.5MHz to 107.9MHz Amplifier section • Output Power: 2W x 2 • Distortion @ 1KHz: <10% THD Speakers • Number: 2 • Size: 40mm (1.56") 33 Warranty information Limited warranty 12 Month Limited Warranty Applies to Acoustic Research Audio/Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below. This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, loss/ interruptions of broadcast or internet service, to costs incurred for installation, removal or reinstallation of product, to corruptions caused by computer viruses, spyware or other malware, to loss of media, files, data or content, or to damage to tapes, discs, removable memory devices or cards, speakers, accessories, computers, computer peripherals, other media players, home networks or vehicle electrical systems. This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffere...
Эта инструкция также подходит к моделям:Радиоприемники - ARIRC200 (1.94 mb)