Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
A. NOTE: When you turn on the radio for the first time, it will Use the navigation controls to make niteradio.combe in “DEMO” mode. To exit this mode, press and release choices and input information: Congratulations on purchasing your new Acoustic Research Wi-Fi Internet Radio. preset 1, then SLEEP, then preset 6 on top of the radio. Please follow these instructions to set up and start using the radio. B. After exiting the DEMO mode, the radio displays the Select Language screen. Choose your preferred Unpack the unit To Exit DEMO mode press and release preset 1, then SLEEP, then preset 6. Radio Remote control language. . move highlight up You should find the following items in the box: C. The Network Setup screen displays – move highlight down connection options: / – move selection/navigate left • Select Wired to connect using an / – move selection/navigate right Ethernet cable and proceed to step SELECT - confirm selected option or character switch LANBroadband modem or Ethernet router/hub/ D. OR When inputting characters, press • Select Wireless, then choose from setup options or to choose among uppercase, displayed: lowercase, numeric, or special – Detect Networks allows you to search for available characters. Radio Remote control* AM loop antenna networks, then choose your network. To insert spaces or correct mistakes, to display the Commands list network name (SSID). See tips to the right. – Enter SSID allows you to manually enter a known press and then press 4 or (or / ) to choose the desired command. Plug in and turn on the radio – If the network is secure, select security type and/or enter Quick Start Setup User Manual your password in the Network Security screen. Guide (this Information leafl et) Card Press to show “DONE” Electrical outlet and SELECT to confi rm. Ethernet cable About passphrase: • This radio supports secured access points using the Wireless Equivalent Privacy ( WEP) keys or Wi-Fi Protected Access ( WPA and WPA2) standards. • WEP keys are either 10 or 26 characters long (e.g. 6E78214A52). Note that some Wi-Fi routers support passphrase generation for WEP security. However, there is no industry standard for WEP passphrase generation and this radio does not support WEP passphrases. • If you are using a WEP secured access point, enter the WEP key (HEX format) instead of the passphrase. Additional requirements: Press or to highlight, • Broadband Internet service SELECT to confi rm. • Broadband (cable/DSL) modem, usually supplied by your Internet service provider D. The radio should now connect to the Internet. If the radio port • An 802.11 b or g ( Wi-Fi) wireless home network or Ethernet router/switch/hub with available LAN does not connect refer to the troubleshooting section in your user manual. For Wi-Fi connections, you may also need: • Your wireless network’s SSID After connecting to the Internet • Your access password (for secure networks) • If you did not activate your Infi nite Radio accounts, or if the radio ! Exit the DEMO mode after cannot get your details from the turning on Setup your AR Infinite Radio accounts Infinite Radio server, the radio may ask for your ZIP code. Input your Press and release preset 1, then To simplify setup on the radio please complete these steps: code. SLEEP, then preset 6. • If your radio has successfully connected to the Internet A. Find the Setup Information Card that contains your radio’s MAC address number (MAC: 00-21-2A- you will hear a welcome message. XX-XX-XX) and activation PIN # (PIN: 0000). ( This number is also found in the Device Info screen under the Settings menu in your radio or on the sticker located on the back of the radio.) B. Using any Internet- connected computer, go to niteradio.com/setup and follow the online instructions. • You will need to input your radio’s MAC address and PIN # to associate your radio with your personal settings. *The remote control must be inserted with 2 “ AAA” batteries (not included) prior use. v1.0 (EN) Learn more about your Internet Radio Read the user manual for more information on the player’s features, safety and warranty information, and answers to Frequently Asked Questions (FAQ’s). Need more help? Do not return this product to the store. Visit niteradio.com to get the latest firmware updates and FAQ’s. Set up MP3tunes Locker Refer to MP3tunes section of the user manual. Controls On/standby Audio source Weather information Station presets Heart Ban Remote control sensor Tag Display LAN port Power cable Top/Front Remote control On/Standby Menu up Previous/scan back/reverse/menu back Volume Heart Ban Tag Previous/scan back/reverse/menu back Record Sleep timer Preset stations RealAudio is a trademark or registered trademark of RealNetworks, Inc. Using the radio General procedures Turn on/off (standby) the radio Press ON/STANDBY. Choose an audio source Press SOURCE to cycle through the audio sources (Slacker Radio, Internet Radio, MP3tunes, FM/AM Tuner, iPod, Int...