Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Should a power interruption occur the clock will continue to run, however, time keeping will not be accurate. The display will be extinguished to conserve battery life but the memory will retain details of the clock time and alarm settings. If the optional battery is not installed in case of the AC power failure the display will blink to indicate the power was interrupted. You will need to reset the clock and alarm. Battery back-up is designed to operate for a short period only. If the unit is not to be used for a prolonged period, remove the battery to avoid battery leakage. In the interests of environmental safety : dispose of batteries safely. 14 13 1211 15 1 2 3 aaa 4 10 5 aaaaaa 9 8 7 6 Location of controls 1 Function selector switch9 Hour button 2 PM indicator10 FM wire aerial 3 Alarm indicator 11 Time button 4 Dial scale and pointer12 Sleep button 5 Tuning control 13 Alarm button 6 Band selector switch AM/FM14 Snooze button 7 Buzzer/Volume control15 Battery compartment 8 Minute button (located underneath unit) P.2 Switching on and setting the clock time Before any alarm functions can be used, you must set the clock to the correct time. 1 Place the unit on a flat surface. Plug the mains plug into the wall socket and switch on the wall socket 2 The LED clock display will flash. 3 Press and hold the TIME button (11) and simultaneously hold down the HOUR button (9) or the MINUTE button (8). The LED clock display will fast forward the minutes and hour segments. Release the TIME button (11) when your desired time is set. 4 The PM indicator (2) will illuminate to indicate 12.00 midday has been reached. Radio operation FM wire aerial To obtain the maximum FM reception fully extend the wire FM aerial (10) (which is located at the rear of the unit) and alter the direction of the wire for best results. The aerial for the AM waveband is located inside the unit. To obtain the maximum AM reception rotate the clock radio. 1 Slide the FUNCTION SELECTOR switch (1) to the ‘ON’ position. 2 Adjust the VOLUME control (7) to a suitable level. 3 Set the BAND SELECTOR switch (6) to either AM or FM as desired. 4 Slowly adjust the TUNING control (5) to select your desired station. 5 To switch off the radio, slide the FUNCTION SELECTOR switch (1) to the ‘OFF’ position. P.3 P.4 Setting the alarm time 1 Press and hold the ALARM button (13) and simultaneously press the HOUR (9) or MINUTE button (8) to set the display to the desired alarm time. Release the ALARM button (13) when the desired alarm time is set. Wake up to the radio alarm 1 Switch the FUNCTION SELECTOR switch (1) to the ‘ON’ position. 2 Set the BAND SELECTOR switch (6) to select either FM or AM wavebands as desired. 3 Adjust the VOLUME control (7) to a suitable level. 4 Slowly adjust the TUNING control (5) to the desired station. 5 To check that the alarm time has been set, slide the FUNCTION SELECTOR switch (1) to the ‘AUTO’ position. The ALARM ON indicator (3) will light. The radio station will wake you up at the set alarm time. The alarm will automatically turn off after 1 hour 59 minutes. Ensure the station you select will be transmitting at the preset alarm time. Wake up to the alarm buzzer In order to check the correct alarm time has been set press the ALARM button (13). The display will indicate the alarm time set. 1 Turn the BUZZER/VOLUME control (7) to the ‘Buzzer’ position until you hear a click. 2 Slide the function selector switch (1) to the ‘AUTO’ position. The ALARM ON indicator (3) will light. The buzzer alarm will activate at the set alarm time. The buzzer will automatically turn off after 1 hour 59 minutes. P.5 Maintenance Do not expose your clock radio to extremes of temperature. The product should be kept in a warm environment free from dust and damp. For external cleaning use only a soft, clean, damp cloth. Use of detergents may damage the finish. Technical specification AC Power supply : 230v AC 50Hz Battery back-up : 9V DC type 6LR61/PP3 (not provided) Radio : FM 88Mhz - 108Mhz : AM 540Khz - 1600Khz Warning labels WARNING: to reduce the risk of electric shock, do not expose this appliance to rain or moisture. ATTENTION: To reduce the risk of electric shock, do not remove ...
Эта инструкция также подходит к моделям:Радиоприемники - 28022 (155.89 kb)