Оценок - , средний балл:
(
)
)
Производитель: Insignia
Размер: 1.56 mb
Название файла: 6d5b042e-c179-2d74-f9f9-f709889c103d.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
12 MIN (minute) button Press to set the minute. 13 HR (hour) button Press to set the hour. Insignia NS-CL01 Clock Radio with iPod® Dock # Description Function 14 TUNE DOWN/SKIP– button In radio mode, press to tune or scan the radio to a lower frequency. In iPod® mode, press to skip to the previous track. In bass/treb mode, press to decrease bass/treble level. 15 TUNE UP/SKIP+ button In radio mode, press to tune or scan the radio to a higher frequency. In iPod® mode, press to skip to the next track. In bass/treb mode, press to increase bass/treble level. 16 PLAY/PAUSE button Press to begin playback when your iPod® is connected to the clock radio. Press again to pause playback. 17 PRESET/MEMORY button In radio mode, press to tune to a preset station. Back panel 1 2 3 # Description Function 1 FM antenna Improves reception of FM broadcasts. 2 DC IN jack Insert the small connector from the AC power adapter here. 3 Line in jack Connect a cable from an external audio source to this input jack to hear the sound through your clock radio. Insignia NS-CL01 Clock Radio with iPod® Dock nsignia NS-CL01 Clock Radio with iPod® Dock Setting up your clock radio Using the AC power adapter To use the AC power adapter: 1 Insert the small connector at the end of the AC power adapter cable into the DC IN jack on the back of your clock radio. 2 Plug the AC power adapter into a wall power outlet. Note Only use the supplied AC power adapter, which has the following specifications: DC=6V 1A Unplug both the DC plug and the adapter when not in use. The batteries are automatically disconnected when the AC power adapter is used. Installing the batteries To install the batteries: 1 Turn your clock radio over, then open and remove the door to the battery compartment. 2 Insert four (4) AA batteries into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment. Insignia NS-CL01 Clock Radio with iPod® Dock 3 Reinstall and close the battery compartment and return your clock radio to the upright position. Note The AC power adapter must be disconnected from the DC IN jack on the back of the radio in order for the radio to operate on battery power. When the battery indicator appears in the display, you need to replace the batteries. Installing a backup battery One CR2025 battery can be used as a backup for the clock and alarm time. To install a backup battery: 1 Open the backup battery cover by rotating it counterclockwise, then removing the door. 2 Insert the CR2025 battery as shown, with the positive (+) side of the battery up. Insert battery as shown Insignia NS-CL01 Clock Radio with iPod® Dock nsignia NS-CL01 Clock Radio with iPod® Dock 3 Place the backup battery cover back on the compartment, then rotate it clockwise until it locks. Caution Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Make sure that you follow the correct polarity as indicated in the battery compartment when installing batteries. Reversed batteries may cause damage to the radio. 3. Do not mix different types of batteries together (for example, alkaline, rechargeable, and carbon zinc), or semi-used batteries with fresh ones. 4. If your clock radio is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge batteries not intended to be recharged, because they can overheat and rupture. (Follow battery manufacturer’s directions.) 6. Do not throw batteries into a fire. Dispose of used batteries as hazardous waste. Note The backup battery is used to back up the clock and alarm times only. When the battery is depleted, it should be changed immediately. Connecting the power cord To prepare your clock radio for use: 1 Make sure that your local AC power source matches the voltage shown on the plate located on the AC power adapter. If it does not, consult your dealer or service center. 2 Plug the small connector on the power cable into the DC IN jack on the back of the clock radio and the AC power adapter itself into an AC power outlet. 3 Press the (Standby/on) button to turn on your clock radio. To completely turn off the clock radio, unplug the AC power adapter from the AC power outlet. Caution To protect your clock radio during thunderstorms, unplug the AC power adapter from the AC power outlet. Insignia NS-CL01 Clock Radio with iPod® Dock Using your clock radio Playing the radio To play the radio: 1 Press (Standby/on) to turn on the clock radio. 2 Press FUNCTION repeatedly to select the radio band you want to listen to. 3 Press TUNE UP/SKIP + or TUNE DOWN/SKIP– to tune the radio up or down and select the station you want. 4 Adjust the volume to a comfortable level by pressing either the VOLUME UP or VOLUME DOWN ...