Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
on the system. After use Press FUNCTION . or OFF . to deactivate the AUDIO IN function. To stop playback on the connected device, operate the connected device. Notes when connecting the device by wired connection ..The necessary type of cable or connecting cord depends on the device. Be sure to use the correct type of cable or cord. ..When you watching TV or listening to the radio with a device connected to the system, the reception may be poor. ..When you listen to the radio with a device connected, turn off the connected device to prevent noise. If noise occurs, even when the device is turned off, disconnect and place the device away from the system. Tip ..You can use hands-free calling while the cable or connecting cord is used with this system. Listening to Radio Presetting the radio stations automatically - Auto preset tuning You can preset receivable radio stations in your area automatically by auto preset tuning. You can preset up to 20 FM stations and 10 AM stations. 1 Press FUNCTION . to select “FM” or “AM.” Press FUNCTION . repeatedly until “FM” or “AM” lights up in the display. 2 Press and hold FUNCTION AUTO PRESET . until “AP” begins to flash in the display. 3 Press DISPLAY/ENTER .. Receivable radio stations will be preset automatically in order of frequency. Tip ..To cancel auto preset tuning, press OFF .. Listening to the radio from preset radio stations You can listen to the radio simply by selecting a preset number. Although radio frequencies are preset at the factory, we recommend you to preset receivable radio stations in your area by auto preset tuning. 1 Press FUNCTION . to select “FM” or “AM.” Press FUNCTION . repeatedly until “FM” or “AM” lights up in the display. 2 Press MODE . to select “PRESET.” 3 Press PRESET +/– . to select the preset number for the desired radio station. 4 Press VOLUME –/+ . to adjust the volume. To display the preset number and the frequency when listening to radio Press DISPLAY/ENTER . once to display the preset number, and press again to display the frequency of the current station. To return to the clock display, press DISPLAY/ENTER . once again; or after a few seconds the display will return automatically. After use Press FUNCTION . or OFF . to deactivate the radio function. To improve reception ..For FM radio reception, extend the FM wire aerial . fully to increase reception sensitivity. ..For AM radio reception, connect the supplied AM loop aerial to the system. Rotate the aerial horizontally for optimum reception. ..If stereo FM reception is noisy, press and hold MODE . until “MONO” lights up in the display. You will lose the stereo effect, but noise will be reduced. Listening to the radio by manual tuning 1 Press FUNCTION . to select “FM” or “AM.” Press FUNCTION . repeatedly until “FM” or “AM” lights up in the display. 2 Press MODE . to select “TUNING.” 3 Press and hold TUNE +/– . until the frequency digits begin to change quickly in the display. The system...