Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Радиоприемники - ICF-C7IP (263.47 kb)
Радиоприемники - ICF-C7IP (1.12 mb)
Радиоприемники - ICF-C7IP (586.73 kb)
Радиоприемники - ICF-C7IP (1.07 mb)
Фрагмент инструкции
Only insert up to here. calendar, current time, alarm and station presets will be erased. . . .CR2032 If the time in the display is incorrect after the battery is changed (Reset) commander Before using the card remote commander for the first time, remove the insulation film. When to replace the battery With normal use, the battery (CR2025) should last for about six months. When the remote commander no longer operates the unit, replace the battery with a new one. CR2025 . Notes . Do not attempt to charge the battery. . If you are not going to use the remote commander for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion. To cancel Automatic DST/Summer Time adjustment during the daylight saving time (summer time) period The Automatic DST/Summer Time adjustment can be canceled. Press and hold CLOCK and SNOOZE/DATE/ SLEEP OFF at the same time at least 2 seconds while the clock is displayed. “ ” and “OFF” appear in the display to show that Automatic DST/Summer Time adjustment has been canceled. The display returns to the clock. Notes . The change timing of Automatic DST/Summer Time adjustment employed by the unit (see above) is subjected to variation by circumstances and the law in each country/ region. In such a case, cancel the Automatic DST/Summer Time adjustment and set the DST display manually as necessary. Customers living in a country/region that do not use daylight saving time (summer time) must cancel Automatic DST/Summer Time adjustment before using the unit. . To activate Automatic DST/Summer Time adjustment again, press and hold CLOCK and SNOOZE/DATE/SLEEP OFF at the same time at least 2 seconds. “ ” and “On” appear in the display to show that Automatic DST/Summer Time adjustment has been activated. The display returns to the clock. Setting the clock manually 1 Plug in the unit. 2 Press and hold CLOCK for at least 2 seconds. The year starts to flash in the display. 3 Press ALARM TIME SET + or – repeatedly to set the year. 4 Press CLOCK. 5 Repeat steps 3 and 4 to set the month, day, hour and minute, and then press CLOCK. The seconds start incrementing from zero. Notes . If you do not press any button for about 1 minute while setting the clock, the clock setting will be canceled. . A calendar is installed in this unit. When the date is set, the day of the week is automatically displayed. SUN = Sunday, MON = Monday, TUE = Tuesday, WED = Wednesday, THU = Thursday, FRI = Friday, SAT = Saturday To display the year and date Press SNOOZE/DATE/SLEEP OFF once for the date, and press it again for the year. After a while, the display will change back to the current time automatically. Setting the brightness of the display Three levels of brightness are available by pressing BRIGHTNESS. Operating the radio –Manual tuning 1 Press RADIO BAND to turn on the radio and select the AM or FM band. 2 Press TUNING + or – to tune in to a desired frequency. 3 Adjust the volume using VOLUME + or ...