Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
Release the buttons when the correct alarm time is reached. The clock uses display with a PM indicator. Ensure that the correct 12 hour cycle is selected. Checking the alarm time 1. To check alarm time, press and hold down the Alarm Set button/ Off button the display will show the alarm time Setting the alarm 1. Set the alarm time as previously Function switch to the ' Buzz' position. The Alarm indicator will light. The alarm will sound every day minutes. To turn off the alarm until the next day press AL.Set/ off button To turn off the alarms permanently set the Function selector to the ' Off' position. Setting the alarms to wake to radio 1. Set the alarm time as previously described. Set the Function switch to the ' Auto' position. The Alarm indicator will light. Ensure that the volume is set to the correct level and the desired station is tuned in. The alarm will sound every day at the preset time for 1 hour 59 minutes. To turn off the alarm until the next day press the AL.Set/ off button To turn off the alarms permanently set the Function selector to the ' Off' position. If you need any further advice, please call our Technical Helpline on : 020 8758 0338 (Mon-Fri) Snooze control The radio or buzzer alarm the Snooze button. This sequence can is sounding. Sleep timer The radio can be set to turn off after a preset time has elapsed. Press and hold down the Sleep button until the desired time is reached (maximum 59 minutes in 1 minute steps). The radio will switch off the sleep time has elapsed. To cancel the sleep function before the preset time has expired, press the Snooze button. Dimmer Switch The Dimmer switch located on the left side of your clock radio will allow you to adjust the intensity of the clock display to suit room brightness. Headphones (on A Headphone Socket (3.5mm) is provided for headphones or an earpiece the internal loudspeaker. If you need any further advice, please call our Technical Helpline on : 020 8758 0338 (Mon-Fri) General Do not allow this unit to that the FM band be used of quality and freedom from interference than on the MW or LW bands. Mains supply The CR9951 will operate from a supply of only as advised on the rating plate on the cabinet For your convenience this product is supplied with fitted with a fuse of the appropriate rating. If the plug suitable for your socket outlet, it should be removed plug top, the terminal screws, and removing the cable. The correct style of plug to suit your household together with rated fuse should be fitted. IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN IMPORTANT. DO NOT make any connection to the larger terminal which is marked with the letter E or by the safety earth symbol or coloured Green or Green-and-yellow. The wires in the mains lead are coloured in accordance with the following codes : BLUE - NEUTRAL BROWN - LIVE As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L or coloured RED. Fuse This apparatus must be protected fuse (BS1362) in a 13A plug (BS1363). If another type of the plug, adaptor or distribution IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN. Back-up Battery (not necessary Slide the battery cover catch in the direction Remove the battery cover. Fit a 9 volt IEC size 6LR61(6F22,PP3) or equivalent battery into the compartment. Replace the battery cover. The time and alarm settings will be retained during a of the AC mains supply. The LED display will not be operational. The display will be extinguished to conserve battery life. (Underside) Specifications Circuit FeaturesPower Requirements Loudspeaker 75mm diameter 8 ohms Mains Back-up Battery AC 230 volts, 50Hz onlyIEC size 6LR61 (6F22,PP3) Output Power 0.3W RMS Frequency CoverageAerial System FM Wire Aerial FM 87.5 - 108MHz MW 525 - 1610kHz MW Built-in Ferrite aerial LW 147 - 284kHz LW Built-in Ferrite aerial The Company reserves the right to amend the specification without notice. If you need any further advice, please call our Technical Helpline on : 020 8758 0338 (Mon-Fri) Guarantee This radio is guaranteed for twelve or component breakdown, subject to the procedure below. Should any component or part fail during this guarantee period or replaced free of charge. The guarantee does not cover: 1. Damage resulting from incorrect use. 2. Consequential damage. 3. Product with removed or defaced serial numbers. Procedure: Any claim under this guarantee should be made through the that your Roberts' dealer will be able to attend to any defect quickly and the instrument to the company' service department for attention. In the event that it is from whom it was purchased, please contact Roberts Radio Technical Services at the address shown below. These statements do not affect the statutory rights of a consumer. ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton R...