Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
If the station selected transmits RDS data, “RDS ” lights up. 2 Press TRAFFIC INFO for “ ” to light up along with “RDS”. The unit is now on standby to receive traffic information. • When traffic information is received, “ ” starts to flash, and the unit switches over to the traffic information. • To stop the reception of traffic information and to return to your tuned-in station, press TRAFFIC INFO. Notes • If the tuned-in station is not a traffic information station nor a station in an EON network, a beep sounds. • Switching the band from FM to AM while “ ” is lit in the display causes “ ” to disappear. “ ” does not come back on when the band is switched back to FM or if the unit is turned off and then on again. • When POWER is turned off, traffic information will not be received. *Enhanced Other Networks–EON An EON network consists of a group of stations whereby a listener, who is tuned in to a participating station using a RDS compatible radio, can automatically receive RDS data transmitted by other stations in the network. This unit is equipped to receive RDS traffic information provided by EON networks. Setting the Clock Using the CT Function The CT function of the RDS enables the built-in clock of the unit to automatically synchronize with CT data being transmitted. 1 Switch STATION NAME to CLOCK when “RDS” is lit in the display. The current time appears in the display. 2 Press CLOCK AUTO ADJUST. This activates the CT function and “ ” starts to flash in the display. When the current time is synchronized, “ ” stops flashing and remains in the display. To cancel the function, press CLOCK AUTO ADJUST. “ ”disappears in the display. Notes • If the unit does not receive CT data after 2 minutes, “NO CT” appears in the display. The function is then automatically cancelled. • The current time on your unit, set through this mode, will be as accurate as that of the CT data received. • The CT function may not work in some areas or on certain frequencies. In such a case, “ ” does not come on in the display. Using Other Functions LIGHT Function To view the display in the dark: 1 Press LIGHT. The light on the unit comes on for 10 seconds. When you operate your unit while the light is on, the light stays on for longer than 10 seconds. HOLD Function To prevent accidental operation of the unit: 1 Press HOLD. “H” appears in the display to indicate all the function buttons are locked and inoperative. To cancel the function, press HOLD again. “H” disappears in the display. Using the Stand (See Fig. C) To view the display at an optimum angle, lift the stand at the base of the unit. Before You Begin Thank you for choosing the ICF-M33RDS! It will give you many hours of reliable service and listening pleasure. Before operating the radio, please read these instructions thoroughly and retain them for future reference. Features What is RDS ? The Radio Data System (RDS) is a digital information system developed for radio by the European Broadcasting Uni...