Оценок - 3, средний балл: 4
(
)
)
|
Фото и характеристики Sony CFD-S170L |
Фрагмент инструкции
Press u. Press u. Press u. Press the number buttons for the tracks you want to programme in the order you want up to 20 tracks (see fig. D). Then press u. Press the number buttons for the tracks you want to programme in the order you want up to 20 tracks. Then Press u. Press x u Press the button again to resume play after pause. > . Z PUSH OPEN/CLOSE a number button of the track > (forward) or . (backward) while playing until you find the point > (forward) or . (backward) in pause until you find the point Press xZ m or M X Press the button again to resume play after pause. xZ Playing a CD 1 Press CD (direct power-on). 2 Load a CD in the CD compartment. 3 Press Z PUSH OPEN/CLOSE to close the CD compartment. 4 Press u. The player plays all the tracks once. To stop playback pause playback go to the next track go back to the previous track remove the CD locate a specific track directly* locate a point while listening to the sound locate a point while observing the display * You cannot locate a specific track if “SHUF” or “PGM” is lit in the display. Turn off the indication by pressing x. Tip To locate a track numbered over 10, press >10 first, then the corresponding number buttons. Example:To play track number 23, press >10 first, then 2 and 3. Using the display To check the total track number and playing time Press DISPLAY•ENT•MEMORY in stop mode (see fig. C). To check the remaining time Press DISPLAY•ENT•MEMORY repeatedly while playing a CD. The display changes as follows: t the current track number and playing time r the current track number and the remaining time on the current track* r the number of tracks left and remaining time on the CD * For a track whose number is more than 20, the remaining time appears as “- -:- -” in the display. Selecting the play mode Press MODE until “REP 1” “REP ALL” “SHUF” “SHUF REP” “PGM” “PGM REP” appears in the display. Then proceed as follows: To Select repeat a single track “REP 1” repeat all tracks “REP ALL” shuffle play “SHUF” repeat tracks “SHUF REP” in random order programme play “PGM” repeat programmed tracks “PGM REP” To cancel selected play mode Press MODE until the selected mode disappears from the display. To check the programmed track and playing order in the display To check the order of tracks before play, press DISPLAY•ENT•MEMORY. Every time you press the button, the track number appears in the programmed order. To change the current programme Press x once if the CD is stopped and twice if the CD is playing. The current programme will be erased. Then create a new programme following the programming procedure. Tip You can record your own programme. After you’ve created the programme, insert a blank tape and press z to start recording. Listening to the radio 1 Press RADIO BAND•AUTO PRESET until the band you want appears in the display (direct power-on). Each time you press the button, the indication changes as follows: “FM” t “MW” t “LW” 2 Hold down TUNE + or – until the frequency digits begin to change in the display. The player automatically scans the radio frequencies and stops when it finds a clear station. If you can't tune in a station, press the button repeatedly to change the frequency step by step. Tip If the FM broadcast is noisy, press MODE until “Mono” appears in the display and the radio will play in monaural. Changing the MW tuning interval The MW tuning interval is preset to 9 kHz at the factory. If you need to change the MW tuning interval, do the following: 1 While keeping the RADIO BAND•AUTO PRESET button and x button pressed, disconnect the mains lead from the mains. 2 While keeping the RADIO BAND•AUTO PRESET button and x button pressed, reconnect the mains lead to the mains. The tuning interval is changed and “MW 9” or “MW 10” appears in the display for 2 seconds. After changing the tuning interval, you need to reset your preset radio stations. Presetting radio stations You can store radio stations into the player’s memory. You can preset up to 40 radio stations , 20 for FM and 10 for MW and LW in any order. 1 Press RADIO BAND•AUTO PRESET to select the band. 2 Hold down RADIO BAND•AUTO PRESET for 2 seconds until “AUTO” flashes in the display. 3 Press DISPLAY•ENT•MEMORY. The stations are stored in memory from the lower frequencies to the higher ones. If a station cannot be preset automatically You need to preset a station with a weak signal manually. 1 Press RADIO BAND•AUTO PRESET to select the band. 2 Tune in a station you want. 3 Hold down the number buttons that you want to preset the new station on for about 2 seconds. To select the preset number over 10, press >10 first, then the corresponding number buttons. You need to hold down the last number button to enter for about 2 seconds. (Example: To select 12, press >10 and 1 first, then hold down 2 for about 2 seconds.) Tip The preset radio stations remain in memory even if you unplug the mains lead or remove the batteries. Playing preset radio stations 1 Press RADIO BAND•AUTO PRESET to sel...