Оценок - 4, средний балл: 4
(
)
)
|
Фото и характеристики Sony ICF-C8WM |
Фрагмент инструкции
974 g (2 lb 2.4 oz) including power supply unit Supplied accessories Remote commander (1) AM loop aerial (1) Audio connecting cable (1) Attachment for “WALKMAN” (2) Design and specifications are subject to change without notice. Connecting the aerial To connect the AM loop aerial The shape and the length of the aerial is designed to receive AM signals. Do not dismantle or roll up the aerial. 1 Remove only the loop part from the plastic stand. 2 Set up the AM loop aerial. 3 Connect the cords to the AM aerial terminals. Cord (A) or cord (B) can be connected to either terminal. A B Only insert up to here. Insert the cord while pushing down the terminal clamp. 4 Make sure the AM loop aerial is connected firmly by pulling softly. Adjusting the AM loop aerial Find a place and an orientation that provide good reception. . Do not place the AM loop aerial near the unit or other AV equipment, as noise may result. Tip Adjust the direction of the AM loop aerial for best AM broadcast sound. Preparing the remote commander Before using the card remote commander for the first time, remove the insulation film. the plug from the AC outlet. Otherwise, the calendar, current time, alarm and station presets will be initialized. Reset button . . .CR2032 If the time in the display is incorrect after the battery is changed (Reset) When to replace the battery With normal use, the battery (CR2025) should last for about six months. When the remote commander no longer operates the unit, replace the battery with a new one. CR2025 . Notes . Do not attempt to charge the battery. . If you are not going to use the remote commander for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion. About the backup battery To keep accurate time, this unit contains a CR2032 battery as a backup power source. The battery keeps the clock and the alarm operating in the event of a power interruption. Note for customers in the UK The clock is preset at the factory, and its memory is powered by the preinstalled Sony CR2032 battery. If the “AM 12:00” appears in the display when the unit is connected to AC outlet for the first time, the battery may be weak. In this case, consult a Sony dealer. The preinstalled CR2032 battery is considered part of the product, and is covered by the warranty. You are required to show “Note for customers in the UK” (in this instruction) to a Sony dealer in order to validate the warranty for this product. Knowing when to replace the battery When the battery becomes weak, “.” appears in the display. If a power interruption occurs while the battery is weak, the current time and alarm will be initialized. Replace the battery with a Sony CR2032 lithium battery. Use of another battery may cause a fire or explosion. Replacing the battery Compatible Sony 1 Keep the AC plug connected to the AC outlet, remove the screw that secures the Ericsson Phone models battery holder at the bottom of the unit Compatible Sony Ericsson Phone models are as using a screwdriver, and remove the follows. battery holder (see Fig..). 2 Replace a new battery in the battery holder Model(s) Available with the . side facing up (see Fig..). function(s) 3 Insert the battery holder back into the a C510/C510a/C702/C702a/ Alarm/ unit and secure it with the screw C902/C903 Music (see Fig..). G700/G700Busir/G900 playback/ K530i/K550i/K550im/ Battery 4 Press . (play), RADIO BAND, AUDIO IN K610i/K610im/K618i/ charge or SNOOZE/DATE/SLEEP OFF to turn K770i/K790a/K800i/ “.” off in the display. K810i Note S500i When you replace the battery, do not disconnect T650i/T700/T707/TM506 V630i W508/W580i/W595/ W610i/W660i/W710i/ W760a/W760i/W850i/ W880i/W980/W995/ W995a Z610i/Z710i b C901/C905 Music G502/G705/G705u playback/ K310i/K320i/K510i/K630i/ Battery K660i/K750i/K850i charge M600i P1i/P990i V640i W200i/W300i/W700i/ W705/W810i/W890i/ W902/W910i/W950i/ W960i Z530i/Z550a/Z550i/Z558i Z750i/Z770i c F305 Battery J110i/J120i charge K200i/K330 R300 S302/S312 T250i/T280i/T303 W302/W350i/W380i/W395 Z310a/Z310i/Z555i Press the Reset button with a pointed instrument. The Reset button is in the small hole located near the battery holder. Compatible “WALKMAN” models Use the Oval attachment (supplied with your “WALKMAN”) when you connect it to this unit. If the Oval attachment is not supplied with your “WALKMAN,” use one of the attachments supplied with this unit. “WALKMAN” models compatible with this unit are as follows. Models using the Oval attachment (supplied with your “WALKMAN”) NWZ-E440 series: NWZ-E443/E444/E445/ E443K/E444K NWZ-S540 series: NWZ-S544/S545 Models using the Type A attachment (supplied with this unit) NWZ-E430 series: NWZ-E435F/E436F/E438F NWZ-S630 series: NWZ-S636F/S638F/S639F/ S636FK NWZ-S730 series: NWZ-S736F/S738F/S739F NWZ-A720 series: NWZ-A726/A728/A729 NW-A800 series: NW-A808/A806/A805 NWZ-A810 series: NWZ-A815/A816/A818 NWZ-A820 series: NWZ-A826/A828/A829/ A826K/A828K/A829K Models using the Type B attachment (supplied wit...