Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
unit first, follow the steps above to set alarm built-in sleep timer that turns off the unit Operating the radio reception Go back to the previous .* time, and then select the music function. automatically after a preset duration. track . Even if the alarm setting for iPod is complete, if There are two ways to tune. FM: Extend the FM wire aerial fully to increase Locate a point while . (forward) or you turn the power of iPod touch/iPhone off 1 Press SLEEP while the unit is turned on. reception sensitivity. “SLEEP” appears and the sleep time flashes in To switch between the two tuning methods listening to the sound . (backward) before inserting the iPod touch/iPhone into the the display. (manual tuning or preset), press TUNE MODE/ while playing and unit, the alarm for iPod will not work. ENTER MEMORY. Notes on radio reception hold it until you 2 Press SLEEP to set the sleep timer . Keep digital music players or mobile phones . Setting the radio alarm find the point. duration. Auto preset away from the FM aerial, as this may lead to reception interference. Locate a point while . (forward) or 1 Perform steps 1 to 6 in “To set the Each time you press SLEEP, the duration (in You can preset 20 stations for FM. observing the display . (backward) minutes) changes as follows: . When you are listening to the radio with an alarm.” 1 Press FM to turn on the radio. iPhone connected to the unit, interference with in pause and hold it until you find 2 Press ALARM ON/OFF to select “FM” 2 Press and hold FM until “AP” appears in radio reception may occur. the point. alarm mode. the display. . When you are listening to the radio while The display returns to clock mode for about “FM”, “PRESET” number or “– –” flashes. charging an iPod, interference with radio * During playback, this operation goes back to 4 seconds after you have finished the duration 3 Press TUNE MODE/ENTER MEMORY. “– –” is the last station received. reception may occur. the beginning of the current track. To go back setting and released SLEEP, and then the sleep The unit automatically presets the available . Do not place the FM aerial close to the AC to the previous track, press twice. 3 Press ALARM/CLOCK + or – to select timer starts. channels in order. power adaptor as noise may result. Notes the desired preset number or “– –”. The unit will play for the duration you set, and If a station cannot be preset . When placing or removing the iPod, hold the 4 Press ALARM ON/OFF. then shut off. automatically iPod at the same angle as that of the connector “VOL” appears in the display. To turn off the unit before the preset You need to preset a station with a weak signal Operating an iPod on this unit, and do not twist or bend the iPod 5 Press ALARM/CLOCK + or – to adjust time manually. as connector damage may result. OFF. You can enjoy audio from iPod by connecting to the volume. Press ALARM RESET . Do not carry the unit with an iPod set on the 1 Follow steps 1 and 2 in “Manual tuning this unit. To use an iPod, refer to the user’s guide 6 Press ALARM ON/OFF. connector. Doing so may cause a malfunction. mode” to tune the frequency you wish to of your iPod. To change the sleep timer setting . When placing or removing the iPod, hold the preset. If you are using an iPhone 4S, iPhone 4, iPhone 7 If “ALARM” does not appear in the You can press SLEEP repeatedly to select the iPod firmly so as not to topple the unit. display, press ALARM ON/OFF again. desired sleep timer setting even after the sleep 3GS, iPhone 3G or iPhone, attach the supplied . Before disconnecting the iPod, pause playback. 2 Press and hold TUNE MODE/ENTER The radio will turn on at the set time. timer has been activated. universal dock adapter for iPhone 4S, iPhone 4, MEMORY for preset number until the iPhone 3GS, iPhone 3G or iPhone before To use the unit as a battery charger . Setting the Buzzer Alarm To deactivate the sleep timer flashes. connecting. You can use the unit as a battery charger. 1 Perform steps 1 to 6 in “To set the Press SLEEP repeatedly to set the sleep timer to 3 Press TUNE/PRESET . or . to The adapter number, ., . or ., is shown on Charging begins when the iPod is connected to “OFF” in step 2.the underside of the supplied universal dock the unit. alarm.” select the preset number, then press adapters. . is for the iPhone, . is for the iPhone Charging status appears in the display of iPod. For 2 Press ALARM ON/OFF to select TUNE MODE/ENTER MEMORY. 3GS & iPhone 3G and . is for the iPhone 4S & details, see the user’s guide of your iPod. “BUZZER” alarm mode. The frequency is stored with the selected iPhone 4. Check the adapter number before use. preset number. On copyrights The setting is entered. Universal dock adaptor iPhone, iPod, iPod classic, iPod nano, and iPod 3 If “ALARM” does not appear in the touch are trademarks of Apple Inc., registered in Example: The following display appears display, press ALARM ON/OFF again. the U.S. and other countries. when you preset FM 105.7 MHz to pr...