Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Store DAB+ radio stations manually Note ••You can store a maximum of 10 preset DAB+ radio stations. 1 Tune to a DAB+ radio station. 2 Press and hold PRESET for 3 seconds to activate the storing mode. 3 Rotate TUNING to select a preset number. 4 Press SELECT to confirm. 5 Repeat steps 1 to 4 to store other DAB+ stations. Note ••To remove a pre-stored DAB+ radio station, store another station in its place. Select a preset DAB+ radio station In DAB+ tuner mode, • to select a preset number 1 - 5, press the numeric keypad 1 - 5 directly; • to select a preset number 6 - 10, press and hold 5+, then press the corresponding number key simultaneously (e.g. 5+ and 1 for 6). EN Show DAB+ information While listening to DAB+ radio, press INFO repeatedly to scroll through the following information (if available): »»Station name »»Dynamic Label Segment (DLS) »»Signal strength »»Program type (PTY) »»Ensemble Name »»Channel and frequency »»Signal error rate »»Bit rate and audio status »»Date Use DAB+ menu 1 In DAB+ mode, press MENU to access DAB+ menu. 2 Rotate TUNING to scroll through the menu options: • [Full scan]: scan all the available DAB+ radio stations. • [Manual tune]: tune to a specific channel/frequency manually and add it to the station list. • [Prune]: Remove all the invalid stations from the station list. • [System]: Adjust system settings. 3 To select an option, press SELECT. 4 Repeat steps 2-3 if sub-option is available under one option. [System] • [Factory Reset]: reset all the settings to factory default. • [Software Upgrade]: update software if available. • [SW version]: know the software version of the unit. Note ••If no button is pressed within 10 seconds, the menu exits. Listen to FM radio Select FM mode 1 Press to turn on the radio. 2 Press DAB/FM repeatedly to select FM mode. Tune to FM radio stations In FM tuner mode, rotate TUNING slowly to tune to FM radio stations with strong signal. Store FM radio stations automatically Note ••You can store up to 10 FM radio stations. In FM tuner mode, press SCAN. »»The unit stores all the available FM radio stations and broadcasts the first station. Store FM radio stations manually 1 Tune to an FM radio station. 2 Press and hold PRESET for 3 seconds to activate storing mode. 3 Rotate TUNING to select a number. 4 Press SELECT to confirm. 5 Repeat steps 1 - 4 to store more FM stations. Tip ••To overwrite a preset station, store another station in its place. Select a preset FM radio station In FM tuner mode, • to select the preset station 1 - 5, press the numeric keypad 1 - 5 directly; EN • to select the preset station 6 - 10, press and hold 5+, then press another keypad simultaneously (e.g. 5+ with 1 for 6). Use FM menu 1 In FM mode, press MENU to access FM menu. 2 Rotate TUNING to scroll the menu options: • [Scan setting] • [Stereo setting] • [System] 3 To select an option, press SELECT. 4 Repeat steps 2-3 if sub-option is available under one option. Scan setting • [Strong stations only]: scan stations with strong signals only. • [All stations]: scan all the available radio stations. Stereo setting • [Stereo allowed]: select stereo broadcast. • [Forced mono]: select mono broadcast. Show RDS information RDS (Radio Data System) is a service that allows FM stations to show additional information. If you listen to an FM station with RDS signal, a RDS icon and the station name are displayed. 1 Tune to a RDS station. 2 Press INFO repeatedly to scroll through the following information (if available): »»Station name »»Program type such as [NEWS] (news), [SPORT] (sport), [POP M] (pop music)... »»Radio text messages »»Frequency Use system menu in FM/ DAB+ mode Reset all the settings 1 In DAB+/FM mode, press MENU. 2 Rotate TUNING until [System] (system)is displayed. 3 Press SELECT to confirm. »»[Factory Reset] (factory reset) is displayed. 4 Press SELECT again. »»[No] [Yes] is displayed. 5 Rotate TUNING to select [Yes] or [No], then press SELECT to confirm. • [Yes]: reset all the settings to factory default. • [No]: cancel. Update software (if available) Software upgrade for your radio may be available in future. If you register your product at Philips website (with a valid email address, you may receive software update notification. Or you can visit Philips website constantly to check if the updating information is provided. To update software of your radio, follow these steps strictly: 1 Read software update instructions on Philips website carefully. 2 Download the latest software to your PC, then connect it to your radio via USB port. 3 In FM/DAB+ mode, enter the system menu. 4 Rotate TUNING until [Software Upgrade] (software upgrade) is displayed. 5 Press SELECT to confirm. 6 Follow the instructions on the screen to complete upgrade. EN Note ••If you select [Software upgrade] without downloading the latest software or connecting to PC via USB port, you need power off and turn on the radio again. ••If upgrade is interrupted by accident, you must ...