Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Avoid fierce lash, or falling into the ground. 2. Do not put the radio in the place where is under sunshine, hot or humid. 3. Keep magnetic tape, magnetic card and other magnetic record software away from the speaker, in order to avoid that the record is erased or there is noise in the magnetic tape. 4. If there are sundry matters in the radio, please use the radio after checking by qualified technician. 5. Each index of the radio is adjusted well, so please do not adjust the components in the radio. 6. Use a soft cloth with detergent to clean the cabinet. Please do not use alcohol, thinner and other strong detergent to clean it. INSTALL BATTERY 1. The radio uses two AAA1.5V batteries, please put the new batteries in the battery slot according to the polarity. 2. When the sound is distortion or the volume is faint, please change the batteries in time. Suggestion: Please use high quality battery or alkaline battery for the digit display radio of the radio. Attention: 1. Do not use new and old or different type batteries together. 2. In order to prevent the leakage of the electrolysis liquid or danger of explosion, do not charge, heat or resolve the batteries. 3. If you do not use the radio for a long time, please take out the batteries, lest the leakage of the battery corrodes the parts in the radio. 4. If the battery leaks, you must change the battery after cleaning the slot with soft cloth. APPEARANCE DIAGRAM & FUNCTION INDICATION 1. Display screen 2. Power switch 3. Tuning indicator 4. Hand belt 5. FM band button 6. Tuner 7. AM band button 8. 12/24 hour changeover 9. Timing switch button 10.Sleep timing turn off button 11.Timing switch on set button 12.Minute adjustment button 13.Band switch 14.Hour adjustment button 15.Time set button 16.Supporting rack 17.Telescopic antenna 18.Volume control 19.Earphone socket 20.Battery slot 2 ENGLISH LCD EXPLANATION 1. Afternoon time indication 6. MW frequency unit indication 2. MW band indication 7. FM frequency unit indication 3. SW band indication 8. Timing turn on function indication 4. FM band indication 9. Sleep timing turn off indication 5. SW frequency unit indication 10.Time or frequency indication RECEPTION OPERATION 1. Move the Power switch (2) to the position of ON, the radio begins to work. Move the Power switch (2) to the position of OFF, the radio is turned off, the time displays on the display screen. 2. Turn the Volume control (18) to adjust to the optimum volume. 3. Press the FM button (5) to receive FM station program. 4. Press the AM button (7) to receive AM band program. Move the Band switch (13) to select MW, SW1/SW2 station program. 5. Turn the Tuner (6) to watch the frequency on the display, you can search your desired station program. 3 ENGLISH 6. When the received station is correct and station signal is strong, the Tuning Indicator (3) lights up. 7. In order not to affect others, you can use earphone to listen to the radio. Plug the earphone into the Earphone Socket (19) (the speaker inside the radio disconnects automatically), and you can use earphone to listen to the radio. 8. The supporting rack is set for the radio, it is convenient for you to place the radio. USE ANTENNA 1. Receiving MW by using the internal magfig. 1 netic antenna and you can get the best reception by rotating the direction of the radio. (Figure 1) 2. When you receive FM station, please pull out the telescopic antenna to get the best reception by changing its length and angle. (Figure 2) fig.3 fig.2 3. When you receive SW station, please pull out the telescopic antenna and keep it vertical, to get better reception. (Figure 3) CLOCK SETTING After installing the batteries, in the state of clock, the "12:00" appears on the LCD. Press the 12/24 hours change-over button (8), you can select 12 hours time system or 24 hours time system. When setting the clock time 1. In the state of turning off the radio, keep the Time set button(15) pressed, 2. Meanwhile press the Hour adjustment button (14) to adjust hour, or meanwhile press the Minute adjustment button (12) to adjust minute, it sets 4 ENGLISH clock time. When calibrating the time Reset from the beginning When checking the time Set the power switch to the position of OFF, the time appears on the display screen. Attention: After installing the batteries, the "0:00" appears on the display screen, it means that the time system in use is 24 hours. The "12:00" appears on the display screen, it means that the time system in use is 12 hours, and the PM means afternoon time. TIMING TURN ON SET After completing time set exactly, you can set timing turn on time. When setting timer turning on time 1. In the state of clock, keep the Timing switch on set button (11) pressed. 2. Respectively press the Hour adjustment button (14) to adjust hour, press the Minute adjustment button (1 2) to adjust minute, you can adjust your desired alarm time. When checking timer turning on time Press the Timing switch on set button (11) to display the tim...