Оценок - 6, средний балл: 3.2
(
)
)
|
Фрагмент инструкции
• Open the battery compartment a on the underside and insert a 9 V block battery (Type 6LR61). - 5 Interaction with batteries Leaking batteries can cause damage to the radio alarm. • If you do not intend to use the appliance for an extended period, remove the batteries. • Should the batteries leak, clean the battery compartment with a dry cloth whilst wearing protective gloves. Note: Rechargable batteries cannot be charged via the battery connection. In the event of an extended power cut (several hours), the clock and alarm times must be checked and possibly re-adjusted. Assembly Before operating the device, make sure that it is in a faultfree condition. Do not use it if it is not. • Then insert the plug into the wall power socket. Select a wall power socket that is at all times easily accessible so that the plug can be easily withdrawn in the event of a malfunction. Setting the clock If you are setting up the appliance for the first time after inserting a new battery: • Whilst holding the button TIME r pressed down: • Press several times in succession, or simply press and hold the button HOUR q, to adjust the hour setting. • Release the button HOUR q, as soon as the desired hour setting appears in the display i. • Press several times in succession, or simply press and hold the button MIN w, to adjust the minute setting. • Release the button MIN w as soon as the desired minute setting appears in the display i. The adjusted time will be automatically accepted as soon as the button TIME r is released. Radio Reception • Push the slider switch o into the position ON. • Turn the volume controller VOLUME d to a medium position. - 6 • Select the radio wavelength by means of the AM/FM wave band selector f. • Now select the desired transmitter through turning the tuning knob s. Note: To improve the reception of transmitters in the FM range slowly move the end of the wire aerial in various directions. When you have found the best reception for the desired transmitter, fix the wire aerial into this position e. g. with adhesive tape. For the reception of AM transmitters, an aerial is built into the appliance. For improved reception, alter the position of the appliance in radio mode. Adjusting Alarm-Timings If the clock is set correctly, as described above: Whilst pressing and holding down the button ALARM e: • Press several times in succession, or simply press and hold the button HOUR q, to adjust the hour setting. • Release the button HOUR q, as soon as the desired hour setting appears in the display i. • Press several times in succession, or simply press and hold the button MIN w, to adjust the minute setting. • Release the button MIN w as soon as the desired minute setting appears in the display i. The adjusted time will be automatically accepted as soon as the button ALARM e is released. Switching the Alarm ON If the clock and alarm time are set correctly, as described above: • Push the slider switch o into the position AUTO. The alarm is now switched on. For control purposes, a point appears to the left in the display i. You will be woken by the radio if... • the volume controller VOLUME d is set to a level high enough to awaken you. You will be woken by the signal tone if... • the volume controller VOLUME d is turned down so far that it switches off with an audible click, i. e. it is in the position BUZZ. - 7 Switching the Alarm OFF • Press the button SNOOZE u and the alarm tone will be repeated after 9 minutes. (With the Models KH 2237 and KH 2239, the button SNOOZE u must only be touched to interrupt the alarm tone). • Move the slider switch o to the position OFF to fully deactivate the alarm function. • Place the push switch o back into the position AUTO to activate the alarm function for the next day. Only model KH 2238 • Press the button ALARM OFF k to switch the alarm function off for 24 hours. Sleep Timer If you want to listen to the radio for some time before going to sleep and want the device to switch itself off: • Place the slider switch o into the position OFF or AUTO. • Press the button SLEEP t. The radio will now play for 59 minutes. You can extend the time up to switching off by ... • pressing and holding down the button SLEEP t and, at the same time by using the button HOUR q, extend the switching off time to 1 hour and 59 minutes. You can reduce the time to switching off by ... • pressing and holding down the button SLEEP t and, at the same time by using the button MIN w, adjust the remaining period. • By pressing the button SNOOZE u the Sleep-Timer is deactivated. • On re-pressing the button SLEEP t, the switch-off time will revert to 59 minutes. - 8 Adjust display brightness(Nightlight-Function) The brightness of the display i can be set to 3 levels. • Place the sliding switch o into the position HI, MED or LOW to adjust the desired brightness of the display i. Cleaning and Care Important! Danger of electric shock! Before cleaning the appliance: • Disconnect the power plug from the power socket...
Эта инструкция также подходит к моделям:Радиоприемники - KH 2238 (1.01 mb)
Радиоприемники - KH 2239 (1.01 mb)