Оценок - 4, средний балл: 4 ( )

Производитель: Blaupunkt Размер: 261.87 kb Название файла: Язык инструкции:

Normal playback is then resumed. “RPT OFF” appears briefly in the display. Changing the display You can switch between various display modes in cassette mode: . Elapsed playing time display (“ELAPSED”). . Remaining playing time display (“REMAIN”). . Tape counter display (“COUNTER”). . Clock display (“CLOCK”). To switch between the display modes, . keep pressing the softkey 4 assigned to the “TIME” display item until the required information appears in the display. CASSETTE MODE Resetting the tape counter The tape counter is automatically reset when the cassette is changed. Fast tape winding Fast-forwarding . Briefly press the joystick 7 to the right. “FORWARD” appears in the display. Fast-rewinding . Briefly press the joystick 7 to the left. “REWIND” appears in the display. Stopping fast tape winding To stop fast tape winding, . briefly press the joystick 7 in the opposite direction. Skipping blank spaces (blankskip) You can make the unit automatically skip blank spaces on the tape that are longer than ten seconds. To do so, the blankskip feature must be activated. Switching blankskip on/off . Press the softkey 4 assigned to the “BLS” display item. The current setting “BLS ON” or “BLS OFF” appears briefly in the display when switching on/off. Dolby* B noise suppression If you play cassettes that were recorded using the Dolby B process, you should switch on the Dolby feature. . Press the softkey 4 assigned to the “DLBY” display item. “DLBY ON” or “DLBY OFF” appears briefly in the display. * Noise suppression system manufactured under license from Dolby Laboratories. The word “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Traffic information in cassette mode The “TA” function (traffic announcement priority) means that your device is ready to receive traffic messages even whilst a cassette is being played. If a traffic message is received, cassette playback is stopped and the traffic message is played. For further details, read the chapter entitled “Traffic information”. ENGLISH 51 CD CHANGER MODE CD changer mode (optional) To find out which CD changers / Compact Drive can be used with this unit, please refer to the "Accessories" chapter in these instructions or contact your Blaupunkt dealer. Note: Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer. Information on using the Compact Drive MP3 and recording music tracks onto it can be found in the operating instructions supplied with the Compact Drive MP3. Switching to CD changer mode . Keep pressing the SOURCE button ; until CD changer mode is displayed. Playback continues from the point at which it was last interrupted. If the magazine was removed from the CD changer and then replaced, the CD magazine will first be scanned, and playback will begin from the first track on the first CD that the CD changer detects. Selecting CDs To move up or down to another CD, . press the softkey 4 assigned to the display item of the CD (CD1 – CD10) that you require. To do so, you might need to switch to the “second page” of the main CD- changer menu using the NEXT button 3. or . keep pressing the joystick 7 up or down until the number of the required CD appears in the display. Selecting tracks To move down or up to another track on the current CD, . repeatedly press the joystick 7 to the left or right until the number of the required track appears in the display. If you press the joystick 7 once to the left, the current track will be played again from the beginning. Fast searching (audible) To fast search backwards or forwards, . press and hold the joystick 7 to the left or right until fast searching backwards / forwards begins. Repeating individual tracks or whole CDs (REPEAT) . Press the MENU button 8. . Press the softkey 4 assigned to the “CDC” display item. The CD changer functions menu opens. . Press the softkey 4 assigned to the “RPT” display item. “RPT TRCK” appears briefly in the display. To repeat the whole CD, . press the softkey 4 assigned to the “RPT” display item again. “RPT CD” appears briefly in the display. CD CHANGER MODE Cancelling REPEAT To stop the current track or current CD from being repeated, . keep pressing the softkey 4 that is assigned to the “RPT” display item until “RPT OFF” appears briefly in the display. Random track play (MIX) To play the tracks on the current CD in random order, . Press the MENU button 8. . Press the softkey 4 assigned to the “CDC” display item. The CD changer functions menu opens. . Press the softkey 4 assigned to the “MIX” display item. “MIX CD” appears in the display. To play the all the tracks on all inserted CDs in random order, . press the softkey 4 assigned to the “MIX” display item again. “MIX ALL” appears in the display. Note: In the case of the CDC A 02, CDC A 08 and the IDC A 09, all the CDs and all the tracks in the changer are picked randomly. In the case of any other changer, all the tracks on one C...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: