Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
2. Rotate the scroll wheel around the ON/OFF button clockwise to increase clock time and rotate it counterclockwise to decrease clock time. 3. Slide the Function Selector to lock . 8 A_RP3720 EN 12-13 Radio Built-In AFC The Built-In Automatic Frequency Control (AFC) works only on FM. It helps to reduce drift on FM reception and to keep the radio locked in on the FM station to which it is tuned. Antennas AM Antenna - A built-in ferrite rod antenna eliminates the need for an outside antenna for AM reception. Rotating the unit slightly may improve reception of distant AM stations. FM Antenna - The power cord acts as your FM antenna. The power cord picks up moderate to strong stations and eliminates the need for an external antenna in most strong signal areas. Be sure the power cord is stretched out to its full length. Do not coil or bunch the cord together. Changing position of the power cord may improve reception. 3/25/04, 9:21 AM Turning on/off the Radio Press the ON/OFF button on the top of the unit to turn on the radio. Press again to turn off the radio. Selecting Bands Slide the band switch on the side of the unit to select between FM and AM band. Tuning to Stations Rotate the TUNING knob on the side of the unit clockwise to tune up radio frequency. Rotate it counter-clockwise to tune down radio frequency. Tip: Tip:Tip:Tip:Tip:Tip: Radio frequency will not be displayed when setting the clock or wake time in radio mode. EN 9 Wake Settings EN Setting Wake Time 1. Slide the Function Selector to WAKE 1 or WAKE 2 to set wake 1 or wake 2 time. 12ON OFF DUAL WAKE MIN MAX VOLUME CONTROL CANCEL SLEEP SNOOZE AUTO BRIGHTNESS W A K E W A K E 1 & 32 Tip: Tip:Tip:Tip:Tip:Tip: The “:” flashes on the display in wake time setting mode. 2. Rotate the scroll wheel around the ON/OFF button clockwise to increase clock time and rotate it counterclockwise to decrease clock time. 3. Slide the Function Selector to lock . Selecting Wake Source Press 1 repeatedly to select wake source for wake 1. 1 lights on the display when wake 1 to tone is selected. 1 lights on the display when wake 1 to radio is selected. 10 A_RP3720 EN 14-15 Press 2 repeatedly to select wake source for wake 2. 2 lights on the display when wake 2 to tone is selected. 2 lights on the display when wake 2 to radio is selected. Wake to Tone When wake to tone is selected, the icon will be displayed. Note: Note:Note:Note:Note:Note: The unit equips with GRAD-U- GRAD-U-GRAD-U-GRAD-U-GRAD-U-GRAD-U- WAKE WAKEWAKEWAKEWAKEWAKE feature, the alarm tone volume will increase gradually to its maximum in about 30 to 45 seconds. Tip: Tip:Tip:Tip:Tip:Tip: If you set SLEEP function with low volume level before going to bed, we advise using Wake to tone mode to wake you up since its volume will automatically increase. Wake Settings Wake to Radio When wake to radio is selected, the icon will be displayed. Setting Wake Station 1. Select radio band. 2. Select desired station. 3. Adjust the volume by turning VOLUME. Note: Note:Note:Note:Note:Note: When you turn off the alarm by pressing ON/OFF ON/OFFON/OFFON/OFFON/OFFON/OFF, the alarm will turn on at the same time tomorrow. Cancel Wake Settings 1. Press CANCEL. 2. Press the WAKE 1 or WAKE 2 button to cancel the corresponding wake function permanently. The corresponding wake icon turns off. 3/25/04, 9:21 AM Turning off Alarm Silence the alarm momentarily Press SNOOZE. The alarm will sound again when the snooze period is over. (see “ Snooze Alarm Operation”). Stop the alarm Press ON/OFF. Then, the alarm will be on the following day at the same time. Tip: Tip:Tip:Tip:Tip:Tip: You can activate the previously set alarm time by pressing WAKE WAKEWAKEWAKEWAKEWAKE 1 11111 or WAKE WAKEWAKEWAKEWAKEWAKE 2 22222 button. Note: Note:Note:Note:Note:Note: When AC power is interrupted and the unit is operating through the DC backup batteries, all wake mode will work with buzzer instead. 11 EN Operating Operating Operating Nap Mode This function wakes you up after a short period of time. Only alarm sound can be selected for Nap. 1. Press and release the NAP button on the side of the unit. The NAP indicator will flash. 2. During this period, adjust NAP time by rotating the scroll wheel around the ON/OFF button. 2 12ON OFF DUAL WAKE MIN MAX VOLUME CONTROL CANCEL SLEEP SNOOZE AUTO BRIGHTNESS W A K E W A K E Note: Note:Note:Note:Note:Note: The nap range is from 10 minutes to 2 hours. Tip: Tip:Tip:Tip:Tip:Tip: Nap time increases and decreases at an interval of 10 minutes. 3/25/04, 9:21 AM EN Sleep Mode In sleep mode, the unit will turn off automatically after a specified time. Setting Sleep Time 1. Press SLEEP then the time display will exhibit 0:59 and the radio will turn on. 2. While holding SLEEP, rotate the scroll wheel around the ON/OFF button clockwise to increase sleep time and rotate it counter-clockwise to decrease sleep time. 2 2 12ON OFF DUAL WAKE MIN MAX VOLUME CONTROL CANCEL SLEEP SNOOZE AUTO BRIGHTNESS W A K E W A K E Note: Note:Note:Note:Note:N...
Эта инструкция также подходит к моделям:Радиоприемники - Dual Alarm Clock RP3720 RP3720 (461.9 kb)