Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Form No. 128-5104 PARTS LIST: Item 1 2 3 4 Description Qty. Left Radio Mounting Bracket 1 Right Radio Mounting Bracket 1 Plastic Push Pin 2 #8 x 3/8" Sheet Metal Screw 4 DASH DISASSEMBLY: 1. With the gear selector in low, firmly pull away the trim panel from the dash. 2. Disconnect all dash switch wiring from panel and remove panel. RADIO PREPARATION: (Fig. 1) 1. Attach left bracket (Item #1) to the left side of the radio using (1) plastic push pin (Item #3) at the rear mounting hole and (2) screws (Item #4) at the front mounting holes. 2. Attach right bracket (Item #2) to the right side of the radio using (1) plastic push pins (Item #3) at the top mounting holes and (2) screws (Item #4) at the front mounting holes. RADIO INSTALLATION: (Fig. 2) 1. Complete all radio wiring connections including attachment of the antenna adaptor. 2. Place radio assembly into dash opening by sliding onto rails and pushing back until plastic retainer clips lock. 3. Perform a functional test on the radio to assure proper operation. 4. Re-assemble the dash. FIG. 2A PREPARED RADIO (asperFig.1) FIG. 2B...