Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
During any interruptions the time and alarm settings will be saved and automatically restored when AC power is again active. 1. Gently turn the unit over and remove the battery compartment door. 2. Install 2 "AA" batteries (alkaline is recommended for longer life), while making sure that the + and – ends match up with those inside the battery compartment. 3. Slide the battery compartment door back on, making sure the door locks into place, and gently return the unit to its upright position. Battery Compartment Maintenance 1. Place the unit on a level surface away from direct sunlight or sources of excessive heat. 2. Protect your furniture when placing the unit on natural wood or wood with a lacquered finish. A cloth or other protective material should be placed between the unit and the furniture. 3. Clean the casing with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials are not recommended, as they may damage the surface of the case. 4. If the unit is not to be used for a prolonged period, such as a month or longer, remove the batteries to prevent possible corrosion. Should the battery compartment become corroded or dirty, clean the compartment thoroughly and replace the batteries. 4 On/Sleep Button Radio Alarm Button Alarm Set Button Tuning/Set Buttons Time Set Button AM/FM Button Date/7-5-2 Button Controls and Indicators ALARM SETALARM SET RADIO BUZZER ALARMBUZZER TUN/CLOCK PRESET AM FM TIME SET MEM SET AM/FM SLEEP VOL. RADIO BUZZER EVERYDAY MON-FRI SAT-SUN DATE ZONE 7-5-2 1-7 Snooze/Night-Light Button 5 Off/Reset Button Buzzer Alarm Button Radio Preset Buttons Memory Set Button Sleep Volume Button Time Zone Button Volume Thumbwheel Controls and Indicators AM/FM Radio Indicator Battery Low Indicator Calendar Mode / Preset Station Numbers / Auto- Set Time Zone PM Clock Indicator Clock / Radio Frequency Display Buzzer Alarm Radio Alarm Indicator Indicator Daylight-Saving 7-5-2 Alarm Indicators Time Indicator LCD Display With Indicators Sleep Volume Indicator AM FM BUZZERRADIO SAT-SUN MON-FRIEVERYDAY DST 6 Auto-Set and Manual Time and Date Settings Auto-Set Time and Date Settings This model is equipped with the Auto-Set feature, meaning that the time and date settings have been programmed at the factory and will already be set when you first plug the model in. Auto-Set will automatically adjust the time and date settings for daylight-saving time and leap years. Auto-Set is programmed for Eastern Standard Time; if you do not live in this time zone, you can easily switch the setting to one of six other time zones. 1. To change your time zone setting, press the Time Zone Button. The current Auto- Set Time Zone in the upper-right-hand corner of the display will flash for approximately ten seconds, after which the display will revert to the standard clock display. 2. While the Auto-Set Time Zone is flashing, press the Tuning/Set Buttons to select your time zone. The display will show each zone’s current time setting. There are seven time zones to choose from: Auto-Set Time Zones Z-01---------------> Atlantic Standard Time Z-02---------------> Eastern Standard Time Z-03---------------> Central Standard Time Z-04---------------> Mountain Standard Time Z-05---------------> Pacific Standard Time Z-06---------------> Alaskan Standard Time Z-07---------------> Hawaiian Standard Time 3. When you have reached your time zone, press the Time Zone Button to lock the setting into place. Manual Time and Date Settings 1. To change your time setting, press the Time Set Button so that the clock display begins flashing. 2. While the display is flashing, press the Tuning/Set Buttons to set the time. Hold a button for a few seconds to advance the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM Indicator. 3. When you have set the current time, press the Time Set Button again to return to the standard display. 4. To change your date setting, press the Date/7-5-2 Button. The display will show the calendar setting. 5. The display will show the flashing year. Press the Tuning/Set Buttons to set the current year. When you have selected the year, press the Date/7-5-2 Button again and follow the above instructions to set the month, and then the day. 6. After you have set the date, press the Date/7-5-2 Button again to return to the standard display. 7 Operating the Dual Alarm System This clock radio features a dual alarm system, with two separate alarms that can be operated independently. The alarms can be set to wake two people at different times, or to have a main alarm and a backup. One alarm features your choice of radio stations as an alarm wake sound, while the second features a buzzer wake sound. You can set the radio alarm, the buzzer alarm, or both alarms. Setting Radio Alarm 1. Press the Alarm Set Button. The display will flash and the Radio Alarm Indicator will appear. If you do not begin setting the time within ten secon...