Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
CALENDAR AND CLOCK DISPLAY MODES Precise time is displayed in hourminutes- seconds format in the middle line of the Atomic Alarm Clock. The date is displayed in month-date format on the top line next to the day of the week. MANUAL SETTINGS TIME ZONE * Select the Time Zone by pressing and holding the UP ( ) button for 3 seconds. * Keep holding UP ( ) button until the desired time zone (Pacific, Mountain, Central or Eastern) is highlighted on the clock’s display map. CLOCK * Press and hold MODE button for 3 seconds: the year digit will flash. * Press UP ( ) or DOWN ( ) to change flashing digits. * After the first value is set, press MODE button again to confirm and move to the next parameter. * Continue setting month, date, hour, minutes and temperature display format. * Press MODE button for the last time to return to the time of day with seconds, after the last parameter is set. PM M D 1 2 PM M D 1 2 PM M D 1 2 PM M D 1 2 PM M D 1 2 PM M D 1 2 PM M D 1 2 PM M D 1 2 PM M D 1 2 YR 7 8 5 6 PROGRAMMING THE SNOOZE INTERVAL * Press and hold SET1 button for two seconds to activate an Alarm1 programming mode. Alarm1 hour digit will flash. * Adjust the desired hour using UP ( ) or DOWN ( ) buttons. * Press SET1 button: the minute digits will flash. * Adjust the desired minutes using UP ( ) or DOWN ( ) buttons. * Press SET1 button again: the snooze interval minutes will flash. * Adjust the desired interval time using UP ( ) or DOWN ( )buttons. * Press SET1 button to confirm set snooze interval. Use the same procedure to program the snooze interval for Alarm2. INDOOR TEMPERATURE The indoor temperature shares the same display’s line with the calendar and the day of the week. NOTE: If the indoor temperature goes above or below operating range stated in specifications, the display will show dashes [ ]. SETTING THE ALARM To set the Alarm1, * Press MODE button once to display ALARM TIME 1. If the alarm is off, the default time “6:00” will be displayed. * Press and hold SET1 button for two seconds. The hour digit will flash. * Enter the hour using DOWN ( ) or UP ( ). * Press SET1 button again. The minute digits will flash. * Enter the minutes using DOWN ( ) or UP ( ). * Press SET1 button again to confirm: an icon [ ] will appear on the display next to the alarm time. * Repeat the same procedure to set an Alarm2, using SET2 button. LIGHT/SNOOZE When the alarm sounds, press the LIGHT/SNOOZE button to temporarily stop the alarm. After the LIGHT/ SNOOZE is depressed, the alarm sound will resume in five minutes. If the alarm is not disabled after that, it will sound for four more minutes and then will stop by itself. DISABLING ALARM Press SET1 or SET2 buttons on the unit to disable any of the alarms. When Alarm1 and Alarm2 are disabled, an applicable icon [ ] or [ ]will disappear from the unit’s display. TIME FORMAT * Press UP ( ) button to toggle between 12 and 24 hour time format DAY OF THE WEEK LANGUAGE * Press and hold DOWN ( ) button for 3 seconds: the default language abbreviation will flash (example – EN) * Continue holding DOWN ( ) button until the desired day of the week language abbreviation is selected. * Release the DOWN ( ) button to confirm the setting. ALARMS There are two available alarms –Alarm 1 and Alarm 2. If any of alarms is activated, it will sound at the set time and the alarm icon will flash Mondays through Fridays. PRECAUTIONS This product is engineered to give you years of satisfactory service if handled carefully. Here are a few precautions: * Do not immerse the unit in water. * Do not clean the unit with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuits. * Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts. * Do not tamper with the unit’s internal components. Doing so will invalidate the warranty and may cause damage. The unit contains no user-serviceable parts. * Use only fresh batteries. Do not mix new and old batteries. * Read the user's manual thoroughly before operating the unit. 1 1 2 New Moon Waning Crescent Waning Crescent First Quarter Waxing Gibbous Full Moon Waning Gibbous Last Quarter PM M D 1 2 M D 1 2 PM M D 1 2 PM M D 1 2 PM M D 1 2 PM M D AM PM M D AM PM M D AM 1 MOON PHASE Moon phase indicator is displayed in accordance with the calendar. PM M D 1 2 11 12 9 10 WWVB RADIO CONTROLLED TIME The NIST (National Institute of Standards and Technology) radio station (WWVB) is located in Ft. Collins, Colorado. It transmits an exact time signal continuously throughout the most of the continental United States at 60 KHz frequency. The Travel Alarm Clock can receive this WWVB signal through the internal antenna from up to 2,000 miles away. Due to the nature of the Earth’s ionosphere, reception can be limited during the daylight hours. The radio controlled clock will search for an alternate station that receives the atomic ...