Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
11 SOUND 140 OWNER’S MANUAL SETTING THE ALARM continued 3. Use the TUNE +/-( / ) buttons to select ALARM ON or OFF and then press ENTER. 4. Use the TUNE +/-( / ) buttons to set the correct minutes then press ENTER. The hour will flash. Use the TUNE +/-( / ) buttons to set the hour, then press ENTER. 5. Use the TUNE +/-( / ) to select the ALARM activation mode (BEEP/FM/AM/AUX/IPOD), then press ENTER. 12 SOUND 140SOUND 140 OWNER’S MANUAL SETTING THE ALARM continued 6. After you complete the setting, the display shows ALARM 1 or ALARM 2. NOTE: The next time you want to set the ALARM time, it will show your last time. After setting the ALARM you can use the remote and press the ALARM1 or ALARM2 buttons to turn it ON or OFF. ON or OFF appears in the display. USING THE SNOOzE FEATURE Once the alarm activates, pressing the radio’s or the remote’s SNOOZE button allows cancellation of the alarm for 7 minutes; then the alarm resumes. This can be done 5 times, then the alarm is cancelled. 1 SOUND 140 OWNER’S MANUAL THE SLEEP TIMER The sleep timer enables play for a specified amount of time (1-99 minutes) and then shuts off. When the SLEEP function is enabled, the main display shows the sleep symbol. The timer setting can be roughly (00-15-30-45-60-75-90min) or trimming (00~90min). SETTING THE SLEEP TIMER 1. Press the SET button, use the TUNE +/-( / ) to select SLEEP, then press ENTER. 2. Use the TUNE +/-( / ) buttons to set the SLEEP time, adjusting the minutes from 00~90(1min/Step), then press ENTER. After setting, the display shows SLEEP. 1 SOUND 140SOUND 140 OWNER’S MANUAL ROUGHLY SETTING THE SLEEP TIMER 1. Press the SLEEP button, use the TUNE +/-( / ) to select 0015- 30-45-60-75-90 min, then press ENTER. 2. After setting the display shows SLEEP. SETTING THE DISPLAY 1. Press the SET button, use the TUNE +/-( / ) buttons to select DISPLAY, then press ENTER. 2. Use the TUNE +/-( / ) buttons to adjust the display’s backlight brightness (AU-01-02-03-04-05), then press ENTER. NOTE: When you set the display’s backlight brightness as ”Au” mode, the brightness will automatically change with the environment. 1 SOUND 140 OWNER’S MANUAL OPERATIONAL INSTRUCTIONS IMPORTANT: 1. Occasionally files on the iPod can become corrupted. This may cause erratic behavior with your Eton product. Apple Computer recommends that you visit their website to obtain instructions on resetting or restoring your iPod to factory settings. 2. It is imperative that you use the correct dock adapter for your iPod and that the dock adapter fits appropriately into the built-in universal dock. Ignoring these rules can cause severe damage to your iPod. Please refer to the section ‘Installing the Dock Adapter’ to properly install the dock adapter before operating the ES 140 with your iPod. SETTING THE DISPLAY 1. Press the SOURCE buttons to select the mode as IPOD or use the remote’s IPOD button to switch. 2. To listen to music, make sure that your iPod is inserted into the built-in universal dock correctly. It will then automatically turn ON and music will begin to play. NOTE: If the sound seems inaudible, the ES 140 may not be detecting that your iPod is in the play mode. If this happens, press the 1 SOUND 140SOUND 140 OWNER’S MANUAL SETTING THE DISPLAY continued PLAY/PAUSE button on the ES 140 or the button on the Remote Control twice for music play to begin. 3. To play music when your iPod is already in the dock and in the standby mode, press the PLAY/PAUSE button on the ES 140 or the button on the Remote Control. When it’s playing press the ENTER button to go forward, use the (Up) (Down) buttons to select and use the MENU button to go back. 4. To pause music, press the PLAY/PAUSE button during the play mode. To resume playback, press it again. 5. To adjust the volume, either Use the KNOB wheel on the ES 140, or use the VOL+ and VOL- buttons on the remote control. 6. To go to the Next or Previous track, use the or button on the remote control. To search the current track using high speed forward or rewind, press and hold the or buttons while track is playing. 7. To power the unit off, Press and hold the radio’s KNOB button or remote’s Power on/off. If your iPod is left in the built-in universal dock, it will continue to charge. 8. This unit may not operate while in the pause mode. Press the PLAY/PAUSE button on the ES 140 or on your iPod to initiate the play mode. 1 SOUND 140 OWNER’S MANUAL CHARGING YOUR IPOD Your iPod will always be CHARGING until reaching the FULL CHARGE mode while it is in the built-in universal dock. This unit cannot charge iPods with 9-pin connectors. Only iPods with 30 pin connectors can be charged. TRANSFERRING VIDEO FROM THE IPOD-VIDEO TO TELEVISION The Video-out feature is only made for 5th generation iPod and iPod Photo. Other generations of iPod are not suitable for this feature. Insert your iPod into the dock. Plug one end of the yellow AV cord into the RCA JACK(VIDEO OUT) on the rear of the unit and the other end...