Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
A long press of AUTOTUNE will start a FULL SCAN. This will scan all the available frequencies and takes several minutes. After the first power-on, or after a SYSTEM RESET, a FULL SCAN is performed. Selecting DAB Services Use the or down buttons on the set or the TUNE – or TUNE + buttons on the remote control to display the list of DAB services available. When the service you want to listen to is displayed, press the ENTER/ button to tune to the service. Auto Enter Mode You can change the operation so that the DAB service is tuned automatically by waiting 3 seconds after displaying the service. To turn AUTO ENTER ON, press and hold ENTER/ for 2 seconds. AUTO ENTER ON will be displayed. Use the same procedure to turn AUTO ENTER OFF Storing into Memory Presets There are 5 memory presets in DAB mode. Note that the procedures 4 SOUND 102 OWNER’S MANUAL DAB RECEPTION continued below will also overwrite what has been previously stored into the memory. That is, a memory cannot be ‘erased’, but can be overwritten. 1. Tune to the DAB service that you wish to store. 2. Press and hold one of the 1-5 buttons on the radio or the remote to store that station into memory, as indicated in the display. ‘Preset # Saved’ is briefly shown in the display. Accessing Memory Presets • Use quick, short presses of the remote’s 1-5 buttons to choose the stored station of your choice. • If a button with no station stored is selected, ‘Preset # Free’ is shown in the display. The DISPLAY Button Sequentially press the DISPLAY button on the radio or the remote to see special information in the display, as noted below. 1. Name of the DAB service provider 2. Time and Date 3. Scrolling Text information 4. Signal strength 5. Program Type 6. Transmission type and bitrate Secondary Services Some DAB transmissions may have special or extra services added for special programs or sports coverage. These are known as second 5 SOUND 102 OWNER’S MANUAL DAB RECEPTION continued ary services, and are indicated by a symbol on the top line of the display. When this indication is on, you can select the secondary service by pressing ENTER/ . To return to the original primary service, press ENTER/ again. Manual Tune Manual tune mode enables you to select individual channels to monitor the reception conditions. It is not intended for normal use. To select manual tune mode, press and hold the DISPLAY button on the remote, or the set, until “Manual Tune” is displayed. Then press ENTER/ . The DAB channel number and frequency is displayed. Use the TUNE up or down buttons on the set or the remote to select the DAB channel. To select a channel press ENTER/ . The TUNE up or down buttons can now be used to select the individual services on the DAB channel. To exit Manual Tune mode, press ENTER again. FM RECEPTION FM Tuning Turn the radio on. Press the MODE button on the set or the remote to select DAB FM. FM shows in the display. Manual Tuning Use quick, short presses of the radio’s TUNE buttons to tune up or down frequency, or use the remote’s TUNE +/- buttons. The frequency is shown in the display in MHz. Auto Tuning With auto tuning the radio stops at the next station with good signal strength. Auto tuning is engaged by pressing the AUTO TUNE buttons. To auto tune up the frequency, use a quick, short press. To 6 SOUND 102 OWNER’S MANUAL FM RECEPTION continued auto-tune down the frequency, use a long, two second press. Storing into Memory Presets There are 5 memory presets in FM. Note that the procedures below will also overwrite what has been previously stored into the memory. That is, a memory cannot be ‘erased’, but can be overwritten. 1. Tune to the radio station that you wish to store. 2. Press and hold one of the 1-5 buttons on the radio or the remote to store that station into memory, as indicated in the display. ‘Preset # Saved’ is briefly shown in the display. Accessing Memory Presets • Use quick, short presses of the remote’s 1-5 buttons to choose the stored station of your choice. • If a button with no station stored is selected, ‘Preset # Free’ is shown in the display. The DISPLAY Button The ES102 can display RDS (Radio Data System) information, which is transmitted on some FM stations. Press the DISPLAY button repeatedly on the radio or the remote to see RDS and signal information in the order below: 1. RDS Program Name 2. RDS Scrolling text 3. RDS Program Type. (PTY) 4. Time/Date. 5. Signal Strength Indicator. 7 SOUND 102 OWNER’S MANUAL AUX-IN MODE To access the AUX-IN mode, sequentially press the radio’s or remote’s MODE button until FM AUX is seen in the display. The AUX-IN mode is used to run external audio through the Eton Sound DAB Radio. Such audio may be from an external MP3 player, CD, cassette unit, radio or phonograph with line out. The AUX-IN socket is on the back of the unit. iPOD MODE Play on your iPOD is started automatically when you select iPOD mode. You can use the remote to control the iPOD functions. Use the MENU button to scroll thro...