Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Repeatedly press the PRESETS button to select a preset; the station will automatically be tuned in. NOTE: See the next page for Automatic Preset Seek. 8 OPERATION (CONTINUED) OPERATION (CONTINUED) AUTOMATIC PRESET SEEK To have the unit automatically seek through the radio stations and program the first 9 strong stations, perform the steps as follows: 1 2 Press the AM/FM/Power On button to turn the unit on and select radio. Repeatedly press the AM/FM/Power On button to select AM or FM. Press the SEEK button 1; the unit will then seek through all of the radio stations and program the first 9 strong stations. When done, it will stop on the first preset. Press the PRESETS button 2 repeatedly to select a preset station. INSERTING A CD Slide the CD DOOR OPEN switch to the right and the CD door will open. Gently insert a CD onto the spindle (label side facing forward) until it clicks. Close the CD door. FAQS: Do I need an adapter to play 3” singles? No, simply insert the 3” single into the groove. What is the maximum time for a CD in this unit? The maximum time is 74 minutes. 9 OPERATION (CONTINUED) OPERATION (CONTINUED) TO PLAYACD 1 2 With a CD inserted (see previous page), press the Play/Pause (®p)/CD/ Power On button to turn the unit on and select CD; playback will start automatically. If in the Stop mode, press the Play/ Pause (®p)/CD/Power On button to start playback. TO PAUSE PLAYBACK, press the Play/Pause (®p)/CD/Power On button again; the elapsed track time will blink in the display. Press again to resume playback. 3 4 To skip forward or backward through the Adjust the VOLUME Up/Down buttons tracks on the disc, press the Tune/Skip/ 1 as desired. When the disc is through Search l 1 or m 2 button. To search playing, it will stop. Press the STOP forward or backward through the tracks (n)/OFF button 2 to stop the disc before on the disc, press and hold the Tune/ it is finished. Press the STOP (n)/OFF Skip/Search l 1 or m 2 button. button 2 again to turn the unit off. NOTES: • If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show, "no disc" for 5 seconds. Then, "no" and the actual time will appear in the display. • When you press the Tune/Skip/Search l or m button, the track elapsed time will appear for three seconds then revert back to the time display. • While playing a CD, press the TIME button to show the elapsed time briefly in the display. When you press the TIME button, the CD playback track's elapsed time will appear in the display for five seconds and then revert back to the time display. 10 OPERATION (CONTINUED) OPERATION (CONTINUED) TO REPEATEDLY PLAY BACK ONE TRACK 1 2 With a CD inserted (see page 9), press the Play/Pause (®p)/CD/ Power On button to turn the unit on and select CD; playback will start automatically. Press the Tune/Skip/Search l 1 or m 2 button to select a track to repeat. 3 Press the CD MODE button 1 once; “REPEAT” will appear in the display and the unit will play the same track over and over until the STOP (n)/OFF button 2 is pressed. TO REPEATEDLY PLAY BACK ALL TRACKS 1 Follow step 1 above. Press the CD MODE button 1 twice; “REPEAT ALL” will appear in the display and the unit will play all the tracks on the CD over and over until the STOP (n)/OFF button 2 is pressed. TO CANCEL REPEAT MODE, press the CD MODE button four times. TO CANCEL REPEAT ALL MODE, press the CD MODE button three times. 11 OPERATION (CONTINUED) OPERATION (CONTINUED) TO PROGRAM THE MEMORY (UP TO 20 TRACKS) 1 2 With a CD inserted (see page 9), press Press the PROGRAM button 1 once; “P the Play/Pause (®p)/CD/ Power On 01” (program number), “00” track number button to turn the unit on and select CD; and the Program indicator will appear in playback will start automatically. Press the display. Select the first track to be the STOP (n)/OFF button 2 to stop played back using the Tune/Skip/Search automatic playback. l 2 or m 3 button, then press the PROGRAM button 1 again. Repeat this step to program additional tracks, up to 20 tracks. 3 4 Press the PLAY/PAUSE (®p)/CD/ Adjust the VOLUME Up/Down buttons 1 Power On button to begin playback. as desired. When the disc is through The unit will play all the tracks in the playing, it will stop. Press the STOP order you programmed them. (n)/OFF button 2 to stop the disc before it is finished. NOTES: • To skip forward or backward through the programs, press the Tune/Skip/ Search l or m button. • Programming is the ability to preselect the order in which a series of tracks will be played. FAQ: How do I clear the memory and exit the Program Playback mode? While in the Program Stop mode, press the STOP (n)/OFF button; the "PROGRAM" indicator will disappear from the display. 12 OPERATION (CONTINUED) OPERATION (CONTINUED) RANDOM PLAYBACK 1 2 To play the tracks on the CD in a random order, while in the Stop mode, press the CD MODE button three times; “RANDOM” will appear in the display. Press the PLAY/PAUSE (®p)/CD/ Power On button 1; the unit ...