Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Then, using the controls on the iPod®, select the track that you would like to wake to and put the iPod® into Pause mode. DO NOT turn the iPod® off; let it go to sleep by itself. When the alarm time is reached, the unit will start playback on the track that you selected and the tracks following it in the playlist. The Mi4004 will playback for 20 minutes then turn off automatically or, if the remaining playlist has less than 20 minutes of playback time remaining, the Mi4004 will just playback the remaining time of the playlist and then stop. NOTES: • It is not necessary to set the volume level for the alarm. When the alarm time is reached, the alarm volume level will be set to the minimum (Level 1) and it will increase one step every five seconds continuously until Volume Level 12 is reached. • When the actual time matches the selected preset alarm time(s), if set to Radio or Buzzer, the unit will automatically turn on for 20 minutes and then shut off. If set to iPod®, the unit will start playback on the track that you selected and the tracks following it in the playlist. The unit will playback for 20 minutes then turn off automatically or, if the remaining playlist has less than 20 minutes of playback time remaining, the unit will just playback the remaining time of the playlist and then stop. • TO SHUT OFF THE ALARM, see TO SHUT THE ALARM OFF section on the next page. • While the alarm is sounding, if the other alarm reaches the alarm time, the first alarm will stop sounding and the second alarm will start sounding. • Make sure you have disconnected the headphones from the Headphones jack (rear of the unit) and disconnected the audio cable from the LINE IN jack (rear of the unit); otherwise, there will be no sound when the actual time matches the preset alarm time. 13 OPERATION (CONTINUED) OPERATION (CONTINUED) TO SHUT THE ALARM OFF 1 If the alarm was set to BUZZ, press the ALARM 1 1 or ALARM 2 2 button (which corresponds to the alarm that was set) and the alarm will turn off and NOT be set for the next day. To set the alarm for the next day, press the ALARM 1 1 or ALARM 2 2 button repeatedly to select between alarm on for buzzer, radio or iPod® again. 2 If the alarm was set to Radio or iPod®, press the Power button 1 to turn off the alarm and the alarm will be set for the next day. To not set the alarm for the next day, press the ALARM 1 2 or ALARM 2 3 button (which corresponds to the alarm that was set) repeatedly until "ALARM 1" or "ALARM 2" disappear from the display. NOTE: While the alarm is on, if you press any button on the unit (except the SNOOZE/SLEEP button or the Power button), the unit will change from Alarm mode to normal Power On mode, so you can adjust any setting (i.e., volume level, radio frequency, etc.) as desired. SNOOZE While the alarm is sounding, press the SNOOZE/SLEEP button; the SNOOZE indicator will appear in the display. Also, "10" will appear in the display for five seconds and then revert back to the actual time. The alarm will turn back on automatically ten minutes later. 1 To set the SNOOZE time to a time other than 10 minutes, when “10” appears in the display, press the SNOOZE/SLEEP button again. Each press of the SNOOZE/SLEEP button will increase the SNOOZE time by five minutes (up to "60” for 60 minutes). Once you stop pressing the button, the display will show the SNOOZE time for five seconds and then revert back to the actual time. The alarm will turn back on according to the SNOOZE time set. 2 NOTE: • To cancel the SNOOZE function (the alarm will not turn back on), press the ALARM 1 or ALARM 2 button (which corresponds to the alarm that was set)–the SNOOZE indicator will disappear from the display–and repeatedly press to select between alarm off (alarm will not be set for the next day) or alarm on for buzzer, radio or iPod® (alarm will be set for next day). 14 OPERATION (CONTINUED) OPERATION (CONTINUED) SLEEP DIMMER SWITCH 1 With the unit in the LINE IN, iPod® or Radio mode, press the SNOOZE/ SLEEP button; the SLEEP indicator and "10" will appear in the display for five seconds which indicates the unit will turn off after 10 minutes. Repeatedly press the SNOOZE/SLEEP button to select the SLEEP time, up to 60 minutes (i.e., "20"–turns off automatically after 20 minutes, "30"–turns off automatically after 30 minutes, etc.). After five seconds, the SLEEP time will disappear from the display. To view the remaining SLEEP time, press the SNOOZE/ SLEEP button once. Repeatedly press the SNOOZE/SLEEP button to increase the SLEEP time; each press will increase the SLEEP time by 10 minutes. NOTE: To cancel the SLEEP function, repeatedly press the SNOOZE/SLEEP button until the "SLEEP" indicator disappears from the display. Slide the DIMMER switch to adjust the dimmer of the display. If the display is too dim, slide the DIMMER switch towards “H” for a brighter display. Slide the DIMMER switch towards “L” for a less bright display. 1 15 OPERATION (CONTINUED) OPERATION (CONTINUED) IPO...