Оценок - 4, средний балл: 3
(
)
)
|
Фрагмент инструкции
2 Front View ............................................................. 2 Base View ............................................................. 3 LCD Display .......................................................... 3 Getting Started ........................................................ 3 Power .................................................................... 3 Clock Display Modes ............................................ 4 Clock Reception ...................................................... 4 Reception Signal .................................................. 5 Clock Settings ......................................................... 5 Alarm ......................................................................... 5 Projector .................................................................. 6 Temperature ............................................................. 7 Reset ......................................................................... 7 Precautions .............................................................. 7 Specifications .........................................................8 About Oregon Scientific ........................................ 9 EU-Declaration of Conformity ...........................9 FCC Statement ........................................................ 9 Declaration of Conformity ................................... 10 EN 2 INTRODUCTION Thank you for selecting the Oregon Scientific™ projection clock (RM382P / RM382PA). NOTE Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know about. OVERVIEW FRONT VIEW 1. Projection ball: Projects time on the wall or ceiling. (Twist the closed projection unit to adjust the focus.) 2. Charging pad 3. SNOOZE / PROJECTION: Activates 8-minute snooze; turns the continuous projection function ON / OFF 4. AL ON / OFF: Activates / deactivates the alarm(s) 5. : Increases setting; enables clock radio reception signal 6. MODE: Toggles between different clock displays; enters clock setting mode 7. ALARM: Toggles between alarm 1, alarm 2 and calendar mode; enters alarm setting mode 8. : Decreases setting; disables clock radio reception signal 12345678 BASE VIEW 1. Charging base circles: Position the unit to project the time vertically at 3 different angles 2. Indoor temperature sensor 3. Ventilation holes 4. Adapter slot 5. °C / °F: Selects temperature unit 6. EU / UK switch (RM382P only): Slide to select your nearest radio signal base 7. RESET: Press to reset 8. Rechargeable battery compartment 9. RESET: Press to reset 10. : Press to turn projector ON / OFF 11. Light sensor: Control the brightness of backlight LCD DISPLAY 1. Time 2. Clock radio reception signal 3. Rechargeable battery icon 4. Indoor temperature reading 5. Time zone / day of the week 6. Alarm 1 / 2 is activated 7. Alarm time / calendar GETTING STARTED POWER MAIN UNIT Plug in the AC adapter. 1891011234567 1234567 PROJECTION UNIT Insert rechargeable batteries (2 x AAA 1.5V) before first use, matching the polarity (+ and -): 1. Twist the ball counter-clockwise until it loosens. 2. Pull the top half upwards. 3. Lift up the battery compartment cover. 4. Slide the battery in. 5. Insert the plastic plug into the slot. 6. Press to turn the projector ON. NOTE Make sure it is fully charged before first use. NOTE When opening or closing the ball you will hear a click signifying that it has opened or closed. Do not keep twisting beyond the click noise or you may break the unit. NOTE appears with the projected time when the projection unit batteries are low. To charge the projection unit, place it on the main unit, making sure that 1 of its 3 base circles is in contact with the main unit, charging pad. Charge the projection unit for 12 hours the first time and 8 hours from then on. This will provide the projection unit with 10 hours continuous projection time. is animated during charging and static when full. CLOCK DISPLAY MODES Press MODE to toggle between the clock displays: • Clock with seconds • Clock with weekday • Clock with time zone offset and weekday NOTE The light sensor at the back of the clock will detect the light level in the room and adjust the clock display accordingly. Do not position the back of the clock close to a wall or other object, otherwise the light may not function. CLOCK RECEPTION This product is designed to synchronize its calendar clock automatically once it is brought within range of a radio signal: 123456 RM382P: • DCF-77 generated from Frankfurt, Germany for Central Europe • MSF-60 generated from Rugby, England The radio signal range is 1500 km (932 miles). RM382PA: • WWVB-60 generated from the atomic clock in Fort Collins, Colorado The radio signal range is 3219 km (2000 miles). RM382P only – slide the EU / UK switch to the appropriate setting based on your location. Press RESET whenever you change the selected setting. RECEPTION...