Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
When the present channel is HD Radio digital broadcasts the HD icon will light. HD Radio multicast channels To tune to an HD Radio multicast channel, tune to the main signal. 1. Press and hold the [BAND] button (1 sec.). PTY is displayed. 2. Turn the [ROTARY] knob to select PTY or SUB CH. . PTY: Program type . SUB CH: Sub channel 3. Press the [ROTARY] knob. Note: • Multi channel is available when a digital signal is detected, the DIGITAL icon will light. If the digital signal becomes unavailable, the unit will revert to Analog reception. Recalling a preset station Up to six stations on each band can be stored. This allows you to store your favorite HD Radio stations in memory for later recall. 1. Press the [BAND] button to select the desired band. 2. Press the [DIRECT] buttons to select the desired preset station. Note: • Multicast stations can be stored as presets, but the unit must be in Digital or Auto reception mode to receive them. 16 CX501 iTunes Tagging The CX501 offers iTunes® Tagging, which allows the user to “Tag” songs playing on HD Radio™ stations for purchase later through iTunes. When you press and hold the [SOUND] button (2 sec.), the unit stores the title and artist song information that can then be transferred to your iPod when connected to the unit. A list titled “Tagged” will appear in iTunes, allowing you the option to purchase your tagged songs. Note: •“iTunes Tagging” function works by connecting THD300/THD301(sold separately). iPod compatibility For detailed information on the playable iPod models, see our home page: Note: • This system will not operate or may operate improperly with unsupported versions. Tagging music Tune to an HD Radio to begin tagging music. When a digital station is being received, the DIGITAL icon at the display will be illuminated. TAG icon lights up when Tagging function is ready. 1. Press and hold the [SOUND] button (2 sec.). “STORE##/64” will appear in the display. The song information is saved to the unit memory until an iPod is connected. You can tag up to 64 songs before the tags must be transferred to an iPod or deleted. When the Tag memory reaches capacity (64 tags), the bottom of the screen displays “MEMO FULL”. The TAG Messages are as follows: Tag Message Reason STORE ##/64 If the Tags data is ready, and the [SOUND] button is pressed and held (2 sec.). SENDING ## Tags data is sending to iPod. MEMO FULL Tag storage is full. DEFFICIENT Tag data is not available. IPOD FULL iPod memory is full. NOT SUPPORT The THD300/THD301 has the Tagging information, but the connected iPod don’t support the Tagging function. Notes: • Proper tagging depends on good radio reception. If the reception is poor, tagging will be affected. • Tags saved to your iPod can be managed using the iTunes software, available at Downloading tags to your iPod Plug an iPod into the unit to download tags to your iPod. All existing tags are automatically transferred to the iPod and deleted from the head unit’s memory. If an iPod is connected and a song is tagged, the Tag will be immediately transferred to the iPod. Note: • When transferring Tags to an iPod, the unit must remain in Radio mode. To purchase tagged songs, you must sync your iPod to iTunes and then click the “Tagged” list on the left side of the iTunes software screen. Click the “view” button for purchasing information. Notes: • How to enter the iTunes tagging function? “TAG” and “DIGITAL” light up when Tagging function is ready, Press and hold the [SOUND] button (2 sec.) to start iTunes Tagging. • What is seen on the radio’s display to let me know I have tagged the tune? Press the [SOUND] button to show “STORE##64”. After connect to an iPod, the display shows “SENDING 01”. If no connection with iPod, the display will show “STORE##64”. You could save 64 Tag into E2PROM in total. When you connect to an iPod, tag information will be saved in the iPod, and the data in E2PROM will be cleared. • Then how do I get tagged tune from my iPod to the computer? If you have installed iTunes, connect your iPod to your computer and buy songs online. English CX501 17 CD/MP3/WMA Operations English MP3/WMA This unit can play back MP3/WMA files. Note: • If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output (The WMA indicator blinks). . To disable DRM (Digital Rights Management) 1. When using Windows Media Player 9/10/11, click on TOOL . OPTIONS . MUSIC RECORD tab, then under Recording settings, unclick the Check box for RECORD PROTECTED MUSIC. Then, reconstruct files. Personally constructed WMA files are used at your own responsibility. Precautions when creating MP3/ WMA file . Usable sampling rates and bit rates 1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate 8 kbps-320 kbps / VBR 2. WMA: Bit rate 5 kbps-320 kbps . File extensions 1. Always add a file extension “.MP3” or “.WMA” to MP3 or WMA file by using single byte letters. If you add a file extension other than speci...