Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN DANGEROUS VOLTAGE The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. ATTENTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1 PREPARATION FOR USE PREPARATION FOR USE Unpacking and Setup • Carefully remove the unit from the display carton and remove all packing material from the unit itself. AC Operation Unwind the AC cord and extend it to its full length. Insert the AC cord into any convenient AC 120V~60Hz household outlet. 2 LOCATION OF CONTROLS 1. TIMER BUTTON 2. MEM UP BUTTON 3. MEM DN BUTTON 4. TUNER/CLK BUTTON 5. MOUNTING BRACKET 6. FUNCTION BUTTON 7. CH. UP BUTTON 8. VOLUME BUTTON 9. ENTER BUTTON 10. ITEM BUTTON 11. CH. DN BUTTON 12. EQ BUTTON 13. BAND BUTTON 14. SLEEP BUTTON 15. MEM/CLK SET BUTTON 16. POWER BUTTON 3 16 12 8 7 11 1 3 2 15 9 10 6 13 14 4 5 LOCATION OF CONTROLS LOCATION OF CONTROLS 1 2 3 4 5 6 1. MEM. CH. UP/DN BUTTON 2. FUNCTION BUTTON 3. NUMBERDIAL BUTTONS 4. DISPLAY BUTTON 5. ITEM/ENTER BUTTON 6. TIMER BUTTON 7. MEM/CLK SET BUTTON 8. TUNE/CH BUTTON 7 9 8 15 14 13 12 11 10 9. MENU BUTTON 10. TFT ON/OFF BUTTON 11. BAND BUTTON 12. EQ BUTTON 13. VOLUME BUTTON 14. MUTE BUTTON 15. POWER BUTTON 4 POWER SOURCES POWER SOURCES (FOR REMOTE CONTROL) BATTERIES NOTE: The button cell battery contains mercury, don’t put in the trash. Recycle or dispose as hazardous waste. NOTE: You may need to remove a protective covering from the remote’s battery compartment before using the remote control. 5 OPERATING INSTRUCTIONS 1. SETTING THE TIME (POWER OFF MODE) 2. LISTENING TO THE RADIO 6 MEM/CLK SET MEM/CLK SET MEM/CLK SET MEM/CLK SET TO ADJUST MINUTE PRESS AND HOLD TO SCAN TO SELECT RADIO SELECT AM/FM THE NEXT AVAILABLE CHANNEL FUNCTION BAND TUNING TUNING TUNING TUNING PRESS AND HOLD TO SELECT 24 HR OR 12 HR PROGRAM RADIO STATIONS 3. TELEVISION OPERATION OPERATING INSTRUCTIONS 7 MEM/CLK SET MEM/CLK SET REPEATEDLY PRESS AND HOLD ENTER ENTER TUNING TUNING TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP 4. SET UP OPERATING INSTRUCTIONS 8 PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR ENTER ENTER ENTER ENTER ENTER ENTER FULL PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE DEFAULT FULL PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE DEFAULT FULL PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE DEFAULT FULL PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE DEFAULT OPERATING INSTRUCTIONS 9 HUE DISPLAY MODE RESET TO DEFAULT SETTING EXIT PICTURE MENU TUNING CHANNEL CHOOSE 4:3 OR FULL 5 6 ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE DEFAULT PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE DEFAULT PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE DEFAULT PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE DEFAULT PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE RESETING TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP OPERATING INSTRUCTIONS 10 TV MODE (AIR/CABLE) FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP EXIT TUNING MENU X 1 ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER X 4 X 5 TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP PLEASE INPUT 0 OR 1 PLEASE INPUT 0 OR 1 TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP CABLE TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP CABLE TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP CABLE PLEASE INPUT 0 OR 1 TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP CABLE PLEASE INPUT 0 OR 1 TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP CABLE 5. LISTENING TO AN AUXILIARY SOURCE 6. SETTING KITCHEN TIMER 7. EQ OPERATING INSTRUCTIONS 11 FROM VIDEO OUTPUT FROM LEFT AUDIO OUTPUT FROM RIGHT AUDIO OUTPUT TV, VCR, STEREO, VIDEO GAME SYSTEM, ETC. HOLD TIMER BUTTON TO SHUT OFF TIMER REPEATEDLY * * * Use a soft, clean cloth moistened with plain, luke-warm wafer to clean the exterior of the unit. Never use solvents such as benzene or other strong chemical cleaners since these could damage the unit’s finish. It is important that no liquid reac...