Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
The display shows the volume level, from 0 (silent) to 99 (loud). To select AM or FM – If the radio is off or in the AUX mode, press to select the radio. Press again to change between AM and FM. To tune in a station – Press and hold either button until the desired station is selected. To seek a station – Press and hold either button until you hear a beep. Release to find the next strong station. To preset up to 6 AM and 6 FM stations – Use the Tuning buttons to find the desired station. Then hold down any Presets button until you hear a beep. The station is now preset to that number. To select a preset station – Choose AM or FM. Press the Presets button for the station you want. To display the selected station – If the display is in clock mode and the radio is on, press both Tuning buttons (control panel) together or press Station (remote). To mute the sound – On the remote control ONLY, press to silence the radio. Press again to restore volume. Use the remote control to select this function. To listen to a component connected to AUX – Press to turn on the radio in AUX mode. This does not turn on the component. To go to sleep listening to music – Press Sleep to set the automatic shutoff time. Initially, the display shows you the first setting of 75 minutes. Press again to change the automatic shutoff time to 60, 45, 30, 15, 10, 5, or 0. Alarm Mode Alarm Set Clock Set Volume Presets 1 2 3 4 5 6 Tuning Sleep/Snooze AUX AM/FM On/Off Wave Radio Time Alarm Sleep Tuning Station Volume Mute AUX AM FM On Off Wave Radio 1 2 3 4 5 6 Presets On/Off On Off Volume Volume AM/FM AM FM Tuning Tuning Tuning Tuning Tuning 1 2 3 4 5 6 Presets 1 2 3 4 5 6 Tuning Presets 1 2 3 4 5 6 AM/FM Presets 1 2 3 4 5 6 Presets AM FM Tuning Station Mute AUX AUX Sleep/Snooze Sleep Operating Your Wave® Radio Operating Your Wave® Radio Reading the radio display You can set the Wave radio to always show either the clock display or the radio display (Figure 11) when the radio is on. To change the display mode, press and hold Clock Set, and then press the AM/FM button. To make additional changes to the display, see “Customizing the display” on page 18. Figure 11 The radio display Indicates the selected sound source Shows station frequency, current time, wakeup time, sleep time, or volume setting Indicates FM stereo broadcast Indicates volume setting is displayed Indicates radio is searching for the next strong station Indicates a preset Indicates the selected station is set preset station AUX FM STEREO VOL AM SEEK PRESET 1 2 3 4 5 6 October 22, 2001 AM255380_01_V.PDF Operating Your Wave® Radio Operating Your Wave® Radio Setting the alarms Note: There are two alarms indicated on the clock display as ALARM (primary) and ALARM 2 (secondary). You can set the wakeup time for either alarm with the radio on or off. The indicator for the selected alarm flashes when setting time or mode. The ALARM 2 indicator continues flashing for 10 seconds after setting ALARM 2. Function Control panel Remote control To select which alarm to set – On the control panel, press and hold Alarm Set. Press Alarm Mode to select ALARM or ALARM 2. The indicator flashes for the alarm you are setting. On the remote, press Time. Press Alarm to select ALARM 2 or to return to ALARM. The indicator flashes for the alarm you are setting. To set the alarm time – On the control panel, hold down Alarm Set and press Tuning up ( ) or down ( ). The time display changes slowly at first, then more quickly. Release Tuning to stop. On the remote, press Time. Press Tuning up ( ) or down ( ). The time dis- play changes slowly at first, then more quickly. Release Tuning to stop. Press Time to return to the current time display. To set the alarm mode – On the control panel, after selecting the alarm, release Alarm Set and press Alarm Mode to select one of the following alarm modes (Press Alarm on the remote): For tone only, press until you see the indicator. For radio only, press until you see the indicator. For tone and radio, press until you see both indicators . When the alarm tone sounds, press Sleep/Snooze to turn the radio on. Press Sleep/Snooze to pause the radio for 10 minutes. To cancel the alarm mode – Follow the directions for setting the alarm mode. Press Alarm Mode (control panel) or Alarm (remote) until the display shows no alarm mode indicators. To check the alarm setting – On the control panel, press and hold Alarm Set to see the ALARM wakeup time and the preset station. While hold- ing Alarm Set, press Alarm Mode to see the ALARM 2 wakeup time and the preset station. On the remote, press Time to see the ALARM wakeup time. Press Alarm to see the ALARM 2 wakeup time. Press Time again to return the dis- play to the current time. ALARM 2 flashes for 10 seconds. To wake to a preselected radio station – On the control panel, ONLY, select ALARM or ALARM 2. Press and hold Alarm Set, and then press one of the six station Presets buttons (you can change between AM and FM if needed). To clear ...