Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Notes: a. Dirty or scratched CD may cause a skipping problem. Clean or replace the CD. b. If an error display or malfunction occurs, disconncet the AC cord and remove all the batteries. Then turn the power back on. 11. The triangular symbol with the lightning Bolt warns the user to the presence of dangerous nonisolated voltage on the inside of this device which may cause an electric sh WARNING DANGER OF A HAZARDOUS ELECTRIC SHOCK. DO NOT OPEN WARNING: TO REDUCE THE RISK OF AN ELECTRIC SHOCK, DO NOT REMOVE THE FRONT OR BACK COVER. INSIDE THE UNIT, THERE ARE NO PARTS THAT CAN BE REPAIRED OR ADJUSTED BY THE USER. PLEASE REFER TO QUALIFIED TECHNICIANS. The triangular symbol with the exclamation highlights important points of which the user should refer to the manual regarding maintenance and repair. MODEL 4518 Projection clock radio with thermometer and infrared sensor snooze 02-4518-EN.qxp 12/4/06 3:02 PM Page 11 12. CONTROLS 1. MODE SET BUTTON 2. ALARM SET BUTTON 3. ALARM 1 BUZZER / RADIO SELECT BUTTON 4. ALARM 2 BUZZER / RADIO SELECT BUTTON 5. C° / F° BUTTON 6. INFRARED SENSOR 7. SET BUTTON 8. SET BUTTON 9. POWER ON/OFF (ALARM OFF) BUTTON 10. SNOOZE / SLEEP BUTTON 11. LED DISPLAY 12. DIAL SCALE AND POINTER 13. AUDIO IN JACK 14. VOLUME CONTROL 15.WAVE BAND 16. TUNING CONTROL 17. RESET BUTTON 18. TEMPERATURE SENSOR (IN DOOR) 19. AC POWER CORD 20.FM ANTENNA WIRE 21. RATING LABEL 22.BATTERY COMPARTMENT 23.SPEAKER 24. MINUTE BUTTON FOR PROJECTION UNIT 25.HOUR BUTTON FOR PROJECTION UNIT 26.TIME SET BUTTON FOR PROJECTION UNIT 27. FOCUS ADJUSTMENT FOR PROJECTION UNIT 28.PROJECTION ON/OFF BUTTON 29.PROJECTION UNIT 30.AUTO DIMMER SENSOR 02-4518-EN.qxp 12/4/06 3:02 PM Page 12 POWER CONNECTION Plug the AC power cord to a household outlet AC source. This unit is equipped with a battery back up system, it requires a 3 x 3V CR2025 Flat Lithium battery (Not included). Insert the battery in the battery compartment, making certain that the positive and negative (+ and -) battery terminals are attached to the corresponding terminals on the plate in the battery compartment. If an AC power failure occurs, the clock automatically switches to the battery power supply, the clock and timer memory continue running. When the AC power resumes, the clock switches back to AC again. GETTING STARTED Press the reset button (17) locates on the back of unit after AC plug in. - The unit will display full segment for 2 seconds, then it will enter the normal mode. - Display will lighten up. 1. TIME AND CALENDAR SETTING A. Setting Time and Calendar - Press Mode Set button (1) in normal mode and keep depress over 2 second to enter Time Set mode, after enter the setting mode, press Mode Set buton (1) to change the mode cycle as follows : Normal - Year - Month - Day - 12/24H - RTC Hour - RTC Min - Normal Action (during data adjustment) : - Press button (7) to adjust data forward. - Press button (8) to adjust data backward. - Keep depress or button for 2 second to enable auto forward. a. Year Set Mode Initial Value : 2006 Year Range : 2000 to 2099 Display Show Year Set Mode b. Month Set Mode Display Show Month Set Mode c. Day Set Mode Display Show Day Set Mode Remark: Weekday will recalculate when year, month or day is adjusted. d. 12/24H Set Mode Display Show 12/24H Set Mode (Select 12H) Display Show 12/24H Set Mode (Select 24H) 13. 02-4518-EN.qxp 12/4/06 3:02 PM Page 13 e. RTC Hour Set Mode Display Show Hour Set Mode f. RTC Min Set Mode Display Show Min Set Mode Remark: Second will reset for every minute adjustment. B. Setting Alarm 1 and Alarm 2 - Press Alarm set button (2) during normal mode and keep depress over 2 second to enter alarm set mode, after enter the setting mode, press Alarm set button (2) to change the mode cycle as follows: Normal - AL1 Hour - AL1 Min - AL1 Weekend Alarm - AL2 Hour - AL2 Min - AL2 Weekend Alarm - Normal Action (during data adjustment): - Press button (7) to adjust data forward. - Press button (8) to adjust data backward. - Keep depress or button for 2 second to enable auto forward. Display Show Setting Alarm 1 Hour Display Show Setting Alarm 1 Min Display Show Setting Alarm 1 Weekend Alarm - Mon to Fri Display Show Setting Alarm 1 Weekend Alarm - Mon to Sun Display Show Setting Alarm 1 Weekend Alarm - Mon to Sat Display Show Setting Alarm 2 Hour Display Show Setting Alarm 2 Min Display Show Setting Alarm 2 Weekend Alarm - Mon to Fri 14. 02-4518-EN.qxp 12/4/06 3:02 PM Page 14 Display Show Setting Alarm 2 Weekend Alarm - Mon to Sun Display Show Setting Alarm 2 Weekend Alarm - Mon to Sat 2. SETTING ALARM OUTPUT AND ALARM ON/OFF A. Change the alarm Output Press AL1 (3) / AL2 (4) button to Music position to select wake up by Radio, set to Buzzer position to select wake up by Buzzer, set to Alarm Off position to disable all alarm. Display Show Alarm 1 wake up by Buzzer Display Show Alarm 1 wake up by Radio Display Show Alarm 2 wake up by Buzzer Display Show Alarm 2 wake up by Radio B. Buzzer Pattern 1st 8 second outp...