Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
• To see the track number that is playing press the TIME button once. The display will show the track number for 5 seconds and then return to the correct time display. Pause Control To pause CD playback temporarily press the PLAY/PAUSE button again. The display will briefly show the track number that is paused and then returns to the correct time. The sound stops but the disc continues to spin and the PLAY indicator flashes. To cancel Pause mode and resume playback press the PLAY/PAUSE button again. The sound returns and the PLAY indicator stops flashing. SKIP/Search Controls ( / ) • To skip to higher or lower numbered tracks during playback press the or buttons repeatedly until the desired track number appears in the display. Playback will begin on the desired track. • To search within a track to locate a specific musical passage depress and hold the or button. The player will search back or forward at high speed. When you hear the desired passage release the or button and normal playback will resume at that point. Note: The Volume level is automatically reduced during high-speed music search. 22 CKD5809_030706.p65 22 7/3/2006, 14:57 REPEAT Playback You can repeat a single track or the entire disc continuously. Repeat playback can be selected while a disc is playing or while the disc is stopped. Single Track Repeat Press the or buttons to select the track to be repeated. If necessary, press the PLAY/PAUSE button to begin playback, and then press the REPEATT button once. The Repeat indicator REP flashes and the selected track will be repeated continuously. All Tracks Repeat Press the REPEAT button twice. The Repeat “REP” indicator remains ‘On’. If necessary, press the PLAY/PAUSE button to begin playback. All the tracks on the disc will be repeated continuously. To cancel Repeat Playback press the REPEAT button until the Repeat “REP” indicator disappears. Normal playback will resume. Repeat Playback is also canceled by pressing the STOP button. 23 CKD5809_030706.p65 23 7/3/2006, 14:57 Programmed Playback Programmed playback allows you to program the player to play up to 20 tracks on a disc in any desired order. You may also program the same track to play multiple times within the same program if desired. Note: You cannot program the player while the disc is playing. If the disc is playing press the STOP button first and then perform the following steps. 1.) Press the PROGRAM button. The Program “PROG” indicator and Track number “0” begin flashing in the display. 2.) Press the or buttons to select the first track to be programmed. Example: Track 7 3.) When track number 7 is flashing in the display press the PROGRAM button again to enter track number 7 in program memory number 1. The track number display returns to “0”. 4.) Press the or buttons to select the next track number to be programmed, and when the desired track number is flashing on the display press the PROGRAM button to enter that track in the program memory. 5.) Repeat step 4 until you have entered up to 20 tracks in the program memory. 6.) Press the PLAY/PAUSE button to begin programmed playback. The PLAY indicator appears and the Program “PROG” indicator continues to flash. The tracks you programmed will be played in the desired order. 24 CKD5809_030706.p65 24 7/3/2006, 14:57 7.) After the last programmed track has played the player stops and the PLAY and Program “PROG” indicators go ‘Off’. However the program sequence remains in the memory. To play the programmed sequence again press the PROGRAM button and then press the PLAY/PAUSE button. If you press the PLAY/PAUSE button without pressing the PROGRAM button normal playback will begin on Track 1 as usual. 8.) To cancel the programmed sequence from the memory, press the STOP button while the player is at programming mode. The programmed sequence is also canceled if the CD door is opened, the Tuner mode is selected or the power is switched ‘Off’. Programmed Repeat Playback You can use the Repeat and Programmed Playback features together to continuously repeat a programmed sequence of tracks if desired. First program the desired tracks and start playback following steps 1 through 6 above. Then press the REPEAT button twice to select All Tracks Repeat. The programmed sequence will be repeated continuously. REP 25 CKD5809_030706.p65 25 7/3/2006, 14:57 Alarm Operation The dual alarms in this system give you the option of waking to the radio, an electronic buzzer tone, or your favorite track on your favorite CD. You may also program one or both of the alarms for weekdays only, weekends only, or everyday operation. Before activating the alarms first check the settings for Alarm 1 and Alarm 2 and adjust if necessary. Refer to “Adjusting The Wake Up Times” and “Selecting The Alarm Mode” on pages 14, 15. Wake To Radio 1.) Tune to the station that you want to wake you up, adjust the VOLUME control to the desired level, and then shut the system ‘Off’. 2.) Slide the ALARM 1 and/or ALARM 2 selector switches, ...