Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
14. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. 1 CK5051_ib_Rev.p65 1 17/12/2001, 10:51 Thank you for purchasing this Emerson Space Saving AM/FM Clock Radio with Dual Alarms. The bright green LED display is designed to be highly visible and easily readable from anywhere in your room. At the same time we have managed to minimize the cabinet size so that the radio won’t take up too much space on your night table. The dual alarms can be set and used independently.And since there are two separate Radio/Buzzer selector switches, you can set one alarm to wake you to buzzer and the other to wake you to radio if your wish. All of the controls are easy to see and easy to use. The radio has a slide rule dial for easy tuning. The clock has fast forward and slow reverse setting controls for quick and easy adjustments. The Sure-Alarm battery back up system will remember the time and alarm settings of course, but it can do more than that. As long as there is a fresh 9-volt battery installed, the Sure-Alarm system will operate the radio or buzzer alarm to wake you up even if the power is off at your normal wake up time. We have taken great care to make sure that your radio was in perfect working order when it left our factory. It has been designed to give you many years of enjoyment and trouble free operation. Should you experience any problems with the operation or performance of this product please refer to the service and warranty information at the end of this instruction manual. Once again, from all of us at Emerson Radio Corp., thanks for your purchase. For future reference, record the serial number in the space provided. Model: CK5051 Serial Number: 2 CK5051_ib_Rev.p65 2 17/12/2001, 10:51 IMPORTANT NOTES IMPORTANT NOTES Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close heat radiating appliances such as electric heaters. • Dusty places. • Places subject to constant vibration. • Humid or moist places. FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 3 CK5051_ib_Rev.p65 3 17/12/2001, 10:51 PREPARATION FOR USE PREPARATION FOR USE UNPACKING AND SET UP • Remove the radio from the carton and remove all packing material from the radio. We suggest that you save the packing material, if possible, in the unlikely event that your radio ever needs to be returned for service. The original carton and packing material is the only safe way to pack your radio to protect it from damage in transit. • Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet. • Note the serial number on the bottom of your radio and write this number in the space provided on Page 2 of this manual. • Place your radio on a level surface such as a table, desk or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration. • Unwind the AC power cord and extend it to its full length. The FM antenna is built in to this cord. It must be fully extended to provide the best FM reception. SURE-ALARM BATTERY BACK UP SYSTEM The Sure-Alarm battery back up system in this radio will maintain the time and alarm settings in the event of a temporary power interruption. When the power is restored the time and alarm settings will be correct. If the power is off at your wake up time, the Sure-Alarm system will use the battery power to turn on the radio or buzzer alarm as usual, as long as the back up battery is installed and has sufficient power remaining. The Sure-Alarm battery back up system requires one 9-volt battery, not included. We recommend that you install an alkaline battery for longest life and best performance. 4 CK5051_ib_Rev.p65 4 17/12/2001, 10:51 To install the battery: • Open the battery compartment cover on the bottom of the radio by pressing the tab in the direction of the arrow. • Connect the 9-volt battery to the battery terminal. It can only be connected one way. • Push the battery into the battery compartment and replace the cover. POWER FAILURE INDICATOR If no battery is installed in the radio, or if the battery in the compartment is weak or dead, the time and alarm settings will be lost if the power is interrupted. When the power is restored the clock display will begin flashing. This is your indication that the time display is incorrect and needs to be reset. Important: After you reset the time, be sure to reset your alarm settings as well. POWER SOURCE This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power sou...