Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Note: If you manually adjust the time, your new setting is entered into the SmartSet® memory. If the power is interrupted, the display will return to your new setting, not the original setting, when the power is restored. ADJUSTING THE WAKE UP TIMES Your SmartSet® alarm clock has two separate alarms that can be set and used independently. You may use the alarms to wake two people at different times, or you may use one alarm for weekdays and the other for weekend wake up times. The procedure for adjusting the wake up time is the same for both Alarm 1 and Alarm 2. 1.) Depress and hold either the Alarm 1 or Alarm 2 setting button. The display will change from the correct time to the Alarm 1 or Alarm 2 wake up time. 2.) While holding the Alarm 1 or Alarm 2 setting button, depress either the Up or Down button to move the display ahead or back to your desired wake up time. 3.) When the desired wake up time appears on the display, release the Up or Down buttons. Note: Be sure that you have set the wake up time correctly by observing the AM indicator. If the AM indicator is ‘On’the wake up time is “AM”. If the AM indicator is ‘Off’, the wake up time is “PM”. 4.) When the desired wake up time (AM or PM) appears on the display, release the Alarm 1 or Alarm 2 setting buttons. 7 AC100_072806.p65 7 28/7/2006, 10:32 SELECTING THE ALARM MODE Your SmartSet® alarm clock allows you to select from among three different alarm operation modes for either alarm. The alarm modes are: • Weekdays only – the alarm will only turn on Monday through Friday; • Weekends only – the alarm will only turn on Saturday and Sunday; • Everyday – the alarm will turn on all 7 days. To check the Alarm Mode setting for Alarm 1, depress the Alarm 1 setting button. The display will show the Alarm 1 wake up time and the day of the week indicators will show you the alarm mode which is selected. • If all 7 indicators are ‘On’, the Everyday mode is selected. • If only the Monday through Friday indicators are ‘On’, the Weekdays only mode is selected. • If only the Saturday and Sunday indicators are ‘On’, the Weekends only mode is selected. To change the Alarm Mode setting for Alarm 1, hold the Alarm 1 setting button and press the Alarm Mode button until the day indicators show the desired mode setting, Weekdays only, Weekends only, or Everyday operation. Release the Alarm Mode and Alarm 1 setting buttons and the display will return to the correct time. Follow the same procedure to select the desired Alarm Mode setting for Alarm 2 if necessary. CHECKING THE WAKE UP TIMES AND ALARM MODE Whenever you want to check the wake up time or the alarm mode settings, simply press either the Alarm 1 or Alarm 2 setting buttons. The display will change from correct time to wake up time and the day indicators will show you the alarm mode which is currently selected. Release the Alarm 1 or Alarm 2 setting buttons to return to correct time. 8 AC100_072806.p65 8 28/7/2006, 10:32 WAKE TO BUZZER NOTE: Alarm 1 and Alarm 2 have different buzzer sounds. •Alarm 1 is a “Single beep” sound. •Alarm 2 is a “Double beep” sound. You will be able to tell which alarm is going off by the sound that it makes. 1.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 2.) Set the Alarm selector switch for 1, 2 or Dual position. The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm that the alarms are set. 3.) At the selected wake up time the buzzer will sound. It will continue for one hour and then shut off automatically. 4.) To stop the buzzer sooner, press either the appropriate Alarm 1 or Alarm 2 button. The buzzer will stop but the alarm remains set and will turn the buzzer on again at the same time on the following day (depending on the Alarm Mode setting). 5.) If you do not want the alarm to turn the buzzer on the following day, set the Alarm selector to the “Off”position. SNOOZE ALARM After the buzzer alarm sounds in the morning you may press the SNOOZE button for a few more minutes sleep. The respective ALM indicator will flash. The alarm will stop for approximately 9 minutes and then turn on again. You may repeat the Snooze operation up to seven times if desired, but after the seventh time the alarm will not turn on again. DIMMER CONTROL The Dimmer control was set to the High position at our factory. If you find the clock display is too bright in a darkened room, set the Dimmer control to the Low position. 9 AC100_072806.p65 9 28/7/2006, 10:32 CHANGING THE LITHIUM BATTERY Like all batteries, eventually the built in lithium battery will need to be replaced. A number of factors, such as, the length of time between the date the clock was manufactured and the date you plugged it in for the first time determine the amount of time before replacement. During this initial storage period, the lithium battery is supplying power to the SmartSet® computer memory. Once you plug the clock in, your household outlet supplies...