Оценок - , средний балл:
(
)
)
Производитель: Emerson
Размер: 507.25 kb
Название файла: 026dc78d-2e79-dc64-fdda-943e07caa8e0.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
We suggest that you save the packing material, if possible, in the unlikely event that your radio ever needs to be returned for service. The original carton and packing material is the only safe way to pack your radio to protect it from damage in transit. • Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet. • Note the serial number on the bottom of your radio and write this number in the space provided on the Warranty page of this manual. • Place your radio on a level surface such as a table, desk or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration. • Unwind the AC power cord and extend it to its full length. The FM antenna is built in to this cord. It must be fully extended to provide the best FM reception. Protect Your Furniture This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the product on fine wooden furniture. 4 CKS3020_072706.p65 4 27/7/2006, 11:35 Power Source This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty. This radio should be connected to an AC outlet that is always ‘live’. Do not connect it to an outlet that is controlled by a wall switch. When the power to the radio is interrupted, the built in lithium battery takes over to maintain the time and alarm settings. To maximize the life of the lithium battery keep the radio connected to a ‘live’AC outlet at all times. You will note that this system is equipped with a polarized AC power plug having one blade wider than the other. This is a safety feature. If this plug does not fit into your existing AC outlet, do not try to defeat this safety feature by filing the wide blade to make it fit into your outlet. If this plug will not fit into your outlet, you probably have an out-dated non-polarized AC outlet. You should have your outlet changed by a qualified licensed electrician. AC Plug AC Outlet 5 CKS3020_072706.p65 5 27/7/2006, 11:35 6 LOCATION OF CONTROLS AND INDICATORS 16 15 14 18 17 19 20 21 23 24 13 22 25 26 Front Panel Top Panel Left Side Panel Right Side Panel 7 8 2 3 4 5 9 10 1 12 11 6 4 3 2 9 10 11 27 28 CKS3020_072706.p65 6 27/7/2006, 11:35 1.) ALARM 1 Time (Month/Date) Display. 2.) DIMMER (HIGH-LOW-OFF/WAVE) Selector Switch . 3.) ALARM 2 (RADIO/BUZZER/OFF) Selector Switch. 4.) ALARM 1 (RADIO/BUZZER/OFF) Selector Switch. 5.) Time Display. 6.) AM Indicator. 7.) DAY OF WEEK (MON, TUE, WED, THU, FRI, SAT, SUN) Indicators. 8.) LOW BATT. .. Indicator. 9.) VOLUME Control. 10.) BAND (AM/FM) Selector Switch. 11.) TUNING Control. 12.) ALARM 2 Time (Year) Display. 13.) Lighted Dial Pointer. 14.) SLEEP Button (Sleep To Music Timer). 15.) RADIO ON/OFF Button. 16.) ALARM MODE (Weekdays/Weekends/Everyday) Alarm Button. 17.) CALENDAR Setting Button. 18.) AC Power Cord (Back Cabinet). 19.) Speaker. 20.) TIME Setting Button. 21.) TIME ZONE Button. 22.) ALARM 1 SET Button. 23.) ALARM 2 SET Button. 24.) SET Up Button. 25.) SET Down Button. 26.) SNOOZE/SLEEP OFF Button. 27.) Back Up Battery Compartment (Bottom Cabinet). 28.) WAVE SENSOR. 7 CKS3020_072706.p65 7 27/7/2006, 11:35 OPERATING INSTRUCTIONS Setting The Time, The First Time IMPORTANT: The first time you connect your new SmartSet® clock radio to the AC outlet the internal computer will automatically set the time correctly for the Eastern Time Zone, which is the initial default setting. The displays will scroll for a few seconds and then show the correct Year, Month, Date, Day and Time in the Eastern Time Zone. If you live in the Eastern Time zone, there’s nothing else to do. Your clock is set correctly and running. If you do not live in the Eastern Time zone you must change the default zone display to your own zone. You only do this one time and the SmartSet® will remember the new default zone setting and will always return to that setting after a power interruption There are 7 time zones programmed into your SmartSet® clock radio as follows: ZONE 1 — Atlantic Time ZONE 2 — Eastern Time (Default Setting) ZONE 3 — Central Time ZONE 4 — Mountain Time ZONE 5 — Pacific Time ZONE 6 — Yukon Time ZONE 7 — Hawaiian Time To change the ...