Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Slide transmitter power switch to turn power on. Power indicator lights. Place receiver where you will see or hear it. If you will be using receiver near a wall outlet, we recommend that you use the AC adaptor. Unwrap and fully extend AC adaptor cord for best reception. Plug AC adaptor cord into wall outlet. Rotate receiver power/volume dial to turn power on. Power indicator lights. Rotate power/volume dial to adjust volume. 1 2 3 4 5 6 7 8 If you have any questions about this product: In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. In Great Britain, telephone 01628 500303. In Australia, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812 (valid only in Australia). Note: AC adaptor is 120 VAC, 60Hz, 3W input; 6 VDC 100mA output; center positive polarity; plug OD is 5.5 mm, plug ID is 1.5 mm. IMPORTANT! Test sound reception of this monitor before first time use and whenever you change location of transmitter (see page 5). Set transmitter channel switch to same channel as receiver. Place transmitter in same room with child. Point microphone directly toward crib or play area. Unwrap and fully extend power cord for best transmission. Plug transmitter power cord into wall outlet. Slide transmitter power switch to turn power on. Power indicator lights. Place receiver where you will see or hear it. If you will be using receiver near a wall outlet, we recommend that you use the AC adaptor. Unwrap and fully extend AC adaptor cord for best reception. Plug AC adaptor cord into wall outlet. Rotate receiver power/volume dial to turn power on. Power indicator lights. Rotate power/volume dial to adjust volume. 1 2 3 4 5 6 7 8 If you have any questions about this product: In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. In Great Britain, telephone 01628 500303. In Australia, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812 (valid only in Australia). Note: AC adaptor is 120 VAC, 60Hz, 3W input; 6 VDC 100mA output; center positive polarity; plug OD is 5.5 mm, plug ID is 1.5 mm. Setup For Vibrations Use IMPORTANT! Test reception of this monitor before first time use and whenever you change location of transmitter (see page 6). Set transmitter channel switch to same channel as receiver. Place transmitter in same room with child. Point microphone directly toward crib or play area. Unwrap and fully extend power cord for best transmission. Plug transmitter power cord into wall outlet. Slide transmitter power switch to turn power on. Power indicator lights. Clip receiver to your clothing, where you will feel vibrations. Or, place the receiver in your pocket. Rotate receiver power/volume dial to turn power on. Power indicator lights. Rotate power/volume dial to adjust volume (if you want to hear sounds). Press the vibrations button. Vibrations ready indicator lights. 1 2 3 4 5 6 7 Hint: Under permitting conditions, the receiver receives sounds (and you will feel vibrations) up to 1,000 feet away from baby. 9 2 1 4 3 5 6 “Wah, Wah, Wah…” 7 Setup For Vibrations Use IMPORTANT! Test reception of this monitor before first time use and whenever you change location of transmitter (see page 6). Set transmitter channel switch to same channel as receiver. Place transmitter in same room with child. Point microphone directly toward crib or play area. Unwrap and fully extend power cord for best transmission. Plug transmitter power cord into wall outlet. Slide transmitter power switch to turn power on. Power indicator lights. Clip receiver to your clothing, where you will feel vibrations. Or, place the receiver in your pocket. Rotate receiver power/volume dial to turn power on. Power indicator lights. Rotate power/volume dial to adjust volume (if you want to hear sounds). Press the vibrations button. Vibrations ready indicator lights. 1 2 3 4 5 6 7 Hint: Under permitting conditions, the receiver receives sounds (and you will feel vibrations) up to 1,000 feet away from baby. 9 2 1 4 3 5 6 “Wah, Wah, Wah…” 7 Problems & Solutions 6 4 3 10 “Ma, ma, ma. Da, da, da…” BUZZZZ BUZZZZZBUZZZZZ 2 1 Circuit Breaker 5 “That doesn’t sound right. Maybe we should check the transmitter.” Problems & Solutions 6 4 3 10 “Ma, ma, ma. Da, da, da…” BUZZZZ BUZZZZZBUZZZZZ 2 1 Circuit Breaker 5 “That doesn’t sound right. Maybe we should check the transmitter.” Problems & Solutions Transmitter power indicator not lit. You hear static or buzzing from receiver. Transmitter power indicator not lit. Transmitter power indicator not lit. Transmitter power indicator not lit. You hear static or buzzing and all five dots lit on receiver. PROBLEMS SOLUTIONS Turn transmitter power on. Power indicator lights. Make sure channel switches on both transmitter and receiver set to sam...