Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Keep small parts away from children when assembling. Summer INSTRUCTION MANUAL DAY AND NIGHT VIDEO MONITOR Thank you for buying the 900 MHz Day and Night Video Monitor from Summer Infant. Now you can hear and see your baby! Ideal for older children too - monitor playroom activities! A CAUTION: KEEP SMALL PARTS OUT OF CHILD’S REACH. See page 8 (back page) for contact information if you should need to order replacement or additional products. QUICK SET UP: Read the instruction manual for more detailed instructions and explanations. • Place Camera in nursery facing crib (do not place in crib or within child's reach). Tilt the Camera/Microphone so it is facing baby (Figure A). Use Security Clips included to secure Camera's cord away from baby's reach (Figure B). Camera may be attached to a wall using wall anchor and screw (included) (Figure C). • Plug small AC Adapter into Camera's AC Adapter tack and other end of cord into a standard electrical outlet. • Turn Camera on and set Channel Selector (A/Off/B) to channel A. • Position TV in the room away from nursery. Plug large AC Adapter into TV's AC Adapter Jack and plug the other end into a standard electrical outlet. • Turn TV on using Power On/Volume Dial. Set Channel Selector to channel A. You should now see a view of and hear sounds from the nursery. If you don't get a picture, press the Quick View/Video On/Off Button. • If the picture is not clear, try switching both the Camera and the TV to channel B. Sometimes a slight adjustment to the Camera or TV can make a significant difference in reception. • Adjust the volume on the TV as needed. A WARNING: THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION. • Prevent cord entanglement - do not place Camera in crib or within arm’s reach of the baby. Use enclosed Security Clips to help secure cords away from baby’s reach. Never use extension cords with AC adapters. Only use the AC Adapters provided. • When an AC Adapter is plugged into an electrical outlet, do not touch the exposed end. • Test monitor before first use, periodically, and when changing location of the Camera. • Do not use monitor near water (such as bathtub, sink, etc.). • Keep monitor away from heat sources (such as stoves, radiators, etc.). • Make sure there is proper ventilation around all monitor components. Do not place on sofas, cushions, beds, etc. which may block ventilation. • Nursery monitors use public airwaves to transmit signals. This monitor may pick up signals from other monitors or similar devices and signals broadcast by this monitor may be picked up by other receivers. • This product is not a toy. Do not allow children to play with it. • This product contains small parts. Adult assembly required. Exercise care when unpacking and assembling the product. FEATURES & COMPONENTS: Channel Selector (A/B) Power On LED Quick View/Video On/Off Button (Video/On/Off) TV (BACK VIEW): Speaker Sound Lights Video On Light AC Adapter Jack- Carrying Handle Vertical Hold - Brightness - Contrast CAMERA: Power On LED Nighttime LED's (for darkened room) Camera/Microphone — Channel Switch (A/Off/B) Wall Anchor (one) Screw (one) Security Clips (six) AC Adapter Jack (bottom of unit) — TV AC Adapter (large) 1 r — Camera AC Adapter (small) SET UP & USE: CAMERA Step 1: Table Top or Wall Mounting: Tilt Camera/Microphone up, and pull up (Figure A). Place Camera in nursery for best view of baby and crib. Place the Camera on a flat surface, such as a dresser, bureau, or shelf. Or mount the Camera on a wall. Be sure not to place camera in crib or within arm's reach of baby. Be sure to test reception and Camera positioning before mounting to a wall (see "Testing Your Initial Set Up" section). To Wall Mount: a) Pre-drill a hole in the wall (3/16", 4.8mm, drill bit) (Figure B). b) Insert wall anchor (included) into hole and gently tap with a hammer until flush with the wall. c) Insert screw (included) into wall anchor. Tighten screw until 1/4" (6.2mm) of screw is exposed. d) Insert smaller AC Adapter into Camera's AC Adapter Jack. e) Slide Camera down onto screw until Camera is secure to wall. f) Plug AC Adapter into a standard electrical outlet. g) Secure cord to wall using 6 Security Clips included to keep cord away from baby's reach (Figure C). To Adjust Camera: Place Camera on a hard, well ventilated surface approximately 4-6 feet from child. Pivot Camera Lens upward until it is upright in base. For additional height gently raise Camera a maximum of 2 "clicks". Camera may be turned left or right and tilted backward and forward for best viewing. Step 2: Set Channel Selector to channel A. The Power On LED will illuminate solid green. TV Step 1: Position TV away from nursery. Step 2: Plug the larger AC Adapter into the TV's AC Adapter Dack. Plug the other end into a standard electrical outlet. Step 3: Turn the TV on using the On/Volume Dial. The Power On LED will illumin...