Оценок - , средний балл:
(
)
)
Производитель: Groupe SEB USA - T-FAL
Размер: 96.88 kb
Название файла: cf054ed7-8478-415c-8930-461b610d7526.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
They combine advanced technology and practical use. They are both attractive and intelligent. BABYPHONE by TEFAL, with its “transmitter – receiver duo”, is a high performance, reliable and clever device to watch over your baby when sleeping or playing. Its musical function will allow you to put baby to sleep gently. With the portable receiver wrist attachment and its long functional endurance, BABYPHONE is a mobile product; you may thus remain in contact with your child while moving around in your home. How to use this device. BEFORE USING FOR THE FIRST TIME, READ THE INSTRUCTIONS CAREFULLY. SAFETY INSTRUCTIONS IN NO CASE CAN THIS PRODUCT REPLACE ADULT SUPERVISION OF A CHILD. . Keep the transmitter and receiver away from children. . Never place the transmitter in the child’s bed or play pen. . Place both devices away from sources of heat or water projection. . Only use the adapter supplied with the device. Any other power source may damage the product. . Do not use an extension cord . Allow for space around the devices and the adapter for correct ventilation. The adapter must be easily accessible and the electric wire must be kept out of passageways and out of reach of children. . Do not pull on the wire to disconnect. . If not used for a long period of time, disconnect the transmitter and remove the batteries from the transmitter and receiver (for the WATCH BABYPHONE Model). . When the transmitter batteries are down, replace all of them with new batteries. . Never disassemble the devices. In compliance with the new regulations which no longer authorise continuous transmission of noise, the transmitter is only triggered by a minimum sound level. It is therefore normal that the receiver remain completely silent when the transmitter is on stand-by and when its green light is blinking. ENG 1 – INSTALLING THE BABYPHONE The BABYPHONE by TEFAL is composed of 2 elements : a transmitter which receives and sends out sounds and which is to be placed near the baby, and a receiver which restores the message at a distance and which you must keep near you. Installing the transmitter • It must be connected to the power network at all times. The adapter (“transmitter” is marked on its label) connects under the base of the device; its wire must be fully extended. To ensure the relay in case of a power failure, or to occasionally use BABYPHONE where there is no electricity, 4 AAA LR03 1.5 volt alkaline batteries may be placed in the device. During normal operation, i.e. for 10 to 12 hours per day, the batteries have a service life of approximately 10 days. 1 2 3 Inserting the batteries : -Disconnect from the power network before inserting the batteries. - Open the back of the device by pressing the large button at the top. - Insert a screwdriver in the slit of the compartment to unclip the small cover. -Turn the device over to remove the black box from its lodging more easily. - Position the batteries in the box, matching the + and – marks indicated (the negative end of the battery is always placed on the spring side). -Reposition the black box in its lodging. - Clip on the cover. - Reposition the back of the device and press the 2 parts together until a “click” is heard. • The transmitter must be installed at a certain height, in an upright position, at a distance of 1 metre minimum and 3 metres maximum from the child. • Put into operation by pressing the 0/1 button. Installing the receiver The WATCH BABYPHONE model operates on alkaline batteries, which are not supplied. The DIGITAL WATCH BABYPHONE model operates on rechargeable batteries (already inserted in the device). • Putting the WATCH BABYPHONE model into operation Visual Loudspeaker monitoring On / off Sound volume button adjustment Inserting the batteries : -Open the rear shell of the receiver by removing the two screws with a screwdriver. - Position 3 AAA type LR03 batteries in the box, matching the + and – marks indicated on the battery box (the negative end of the battery is always placed on the spring side). -Close and screw the rear shell back down. Warning : after the batteries have been inserted, your device turns on automatically. • Putting the DIGITAL WATCH BABYPHONE model into operation Digital Loudspeaker Vibrator Batteries function indicator Visual monitoring Sound volume adjustment On / off button Vibrator button display Reception indicator Sound level indicator Selected channel n° When using for the first time, the device must be recharged for 12 hours : - Connect the adapter (“receiver” is indicated on its label) on the left side of the receiver. - Connect to the power network. When putting the device into operation, the battery indicator of the digital display indicates the battery charge level; when using for the first time, it is important that they be fully charged. ENG ENG Operating possibilities BABYPHONE is a portable product which offers several operating possibilities to meet your needs with regards to mobility or discretion : - may be insta...