Оценок - , средний балл:
(
)
)
Производитель: Philips
Размер: 1.17 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
D Travel pouch important -Read this user manual carefully before you use the appliance and save it for future reference. -Never immerse any par t of the baby monitor in water or any other liquid. -Do not place the appliance where water or any other liquid can drip or splash onto it. -Never put any object containing liquid on top of the baby unit. -Check if the voltage indicated on the adapters of the baby unit and the charger corresponds to the local voltage before you connect the appliance. -Only use the adapter supplied to connect the baby unit to the power outlet. -Only use the charger and adapter supplied to charge the parent unit. -The adapters contain a transformer. Do not cut off the adapters to replace them with other plugs, as this causes a hazardous situation. -If the adapters are damaged, always have them replaced with one of the original type in order to avoid a hazard. For the correct type, see chapter ‘Replacement’. -If the charger of the parent unit is damaged, always have it replaced with one of the original type. -Never use the baby monitor in moist places or close to water. -Children should be super vised to ensure that they do not play with the appliance. -Use and store the appliance at a temperature between 50°F (10°C) and 95°F (35°C). EngliSh 11 -Do not expose the baby unit and parent unit to extreme cold or heat or to direct sunlight. Do not put the baby unit and the parent unit close to a heating source. -Never place the baby unit inside the baby’s bed or playpen. -Never cover the parent unit and the baby unit with anything (e.g. a towel or blanket). Always make sure the cooling vents of the baby unit are free. -If you place the parent unit next to a transmitter or other DECT appliance (e.g. a DECT telephone or wireless router for the internet), the connection with the baby unit may be lost. Move the baby monitor fur ther away from the other wireless appliances until the connection is restored. -Switched-on mobile phones in the vicinity of the baby monitor may cause interference with the baby monitor. -Radio interference is inevitable and may have an effect on the sound quality of the baby monitor. -This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult super vision and should not be used as such. -Take ever y precaution to make sure that your baby can sleep safely . -The humidity and temperature sensor only measures the temperature and humidity in the baby room. It cannot be used to control or adjust the temperature and humidity in the baby room. -This monitor is not intended to be used as a medical monitor and its use should not replace adult super vision. preparing for use Baby unit You can use the baby unit corded or on non-rechargeable batteries. Even if you are going to use the unit corded, we advise you to inser t non-rechargeable batteries. This guarantees automatic back-up in case of power failure. Corded operation 1 Put the large appliance plug in the baby unit and put the adapter in a wall outlet (Fig. 4). operation on non-rechargeable batteries The baby unit runs on four 1.5V R6 AA batteries (not included). We advise you to use Philips LR6 PowerLIfe batteries or an equivalent type. Do not use rechargeable batteries, as the baby unit does not have a charging function. Place batteries in the baby unit if you do not want to use it corded or if you want to be sure of backup power in case of power failure. Replace the batteries when the baby unit indicates that the batteries are low (the empty batter y symbol flashes on the display and the text ‘Batter y low’ appears). Unplug the baby unit and make sure your hands and the unit are dry when you insert the non-rechargeable batteries. 1 2 Remove the lid of the compartment for non-rechargeable batteries (Fig. 5). Insert four non-rechargeable batteries (Fig. 6). Note: Make sure the + and - poles of the batteries point in the right direction. 3 Reattach the lid (Fig. 7). Note:When the batteries are low, the battery light on the baby unit flashes red. 12 EngliSh parent unit operation on rechargeable battery pack The parent unit comes with a rechargeable Li-ion 1000mAh batter y pack. Charge the parent unit before you use it for the first time or when the parent unit indicates that the batter y is low (when the empty batter y symbol flashes on the display and the parent unit beeps). The parent unit star ts indicating that the batter y pack is low 30 minutes before the batter y pack is completely empty. Note: If the rechargeable battery pack is completely empty, the parent unit automatically switches off and loses contact with the baby unit. 1 2 3 4 When you charge the parent unit for the first time or after a long period of disuse, switch it Remove the lid of the compartment for the rechargeable battery pack (Fig. 8). Insert the rechargeable battery pack (Fig. 9). Reattach the lid (Fig. 10). 5 ,, ,, Insert the small appliance plug into the charger, put the adapter in a wall outlet and place the ...