Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Use the baby monitor for its intended household use as described in this manual. 1 Place the parent unit and the baby unit in the same room to test the connection. Make sure the baby unit is at least 3 feet/1 meter away from the parent unit. 2 Press and hold the on/off button 3 on the baby unit until the green power-on light goes on. Note:The power-on light always lights up green, even when there is no connection with the parent unit. The nightlight lights up briefly and then goes out again. , The battery light Tlights up briefly and then goes out again. , 3 Press and hold the on/off button 3 on the parent unit until the sound level lights light up briefl y. The display goes on and the battery symbol appears on the display. The LINK light fl ashes red and the message ‘Searching’ appears on the display. The LINK light on the parent unit turns green and lights up continuously when a connection has been established between the baby unit and parent unit. The message ‘Linked’ appears on the display. After 2 seconds the message ‘Linked’ disappears and the temperature value is shown on the display. , , , , 14 ENGLISH Material thickness Loss of range ENGLISH 15 If no connection is established, the LINK light on the parent unit stops flashing and lights up red.The parent unit beeps from time to time and the message ‘Not Linked’ appears on the display. Positioning the baby monitor 1 Place the baby unit at least 3 feet/1 meter away from your baby. 2 Place the parent unit within the operating range of the baby unit. Make sure it is at least 3 feet/1 meter away from the baby unit to avoid acoustic feedback. For more information on the operating range, see section ‘Operating range’ below. Operating range The operating range of the baby monitor is 330 meters/1000 feet in open air. Depending on the surroundings and other disturbing factors, this range may be smaller. Indoors the operating range is up to 50 meters/150 feet. Dry materials Wood, plaster, cardboard, glass (without metal, wires or lead) Brick, plywood Reinforced concrete Metal grilles or bars Metal or aluminum sheets , -- < 30cm/12in 0-10% < 1cm/0.4in 100% For wet and moist materials, the range loss may be up to 100%. < 30cm/12in 5-35% < 30cm/12in 30-100% < 1cm /0.4in 90-100% The following features are described in chapter ‘Menu options’, as they can only be operated in the menu of the parent unit: Adjusting microphone sensitivity Sound aler t on/off Features 16 ENGLISH -Setting room temperature range (minimum and maximum temperature) -Temperature aler t on/off Adjusting loudspeaker volume 1 Press the volume + or – button on the baby unit until the desired loudspeaker volume for the baby unit has been reached. Note:You can only set the loudspeaker volume on the baby unit when a lullaby is playing. 2 Press the volume + or – button on the parent unit until the desired loudspeaker volume for the parent unit has been reached. The display gives visual feedback on the volume settings of the , parent unit: -j = volume switched off/silent baby monitoring -k = minimum volume -l = maximum volume Note: If the volume is set to a high level, the units consume more power. Talk function You can use the TALK button on the parent unit to talk to your baby (e.g. to comfor t your baby). 1 , Press and hold the TALK button and talk clearly into the microphone from a distance of 15-30cm/6-12in. The green LINK light starts flashing and the message ‘Talk’ appears on the display. 2 Release the TALK button when you have fi nished talking. Sound level lights The parent unit continuously monitors the sound level in your baby.s room and the sound level lights let you know if there is any activity. If your baby cries, you see the sound level lights light up on the parent unit. -As long as the baby unit does not detect a sound, all sound level lights on the parent unit are out. -When the baby unit picks up a sound, one or more sound level lights on the parent unit go on.The number of lights that go on is related to the loudness of the sound picked up by the baby unit. ENGLISH 17 Nightlight 1 Press the nightlight button Q on the baby unit to switch on the nightlight. Q appears on the display of the parent unit. ,2 Press the nightlight button Q again to switch off the nightlight. The nightlight dims gradually before it goes out completely. , Q disappears from the display of the parent unit. , Tip: Switch off the nightlight when you operate the baby unit on the non- rechargeable batteries.This saves power. Paging the parent unit If you have misplaced the parent unit and its volume is switched off, you can use the PAGE button on the baby unit to locate the parent unit. Note:The paging function only works when the parent unit is switched on. 1 Press the PAGE button on the baby unit. The message ‘Paging’ appears on the display of the parent unit. , The parent unit produces a paging alert tone. ,2 To stop the paging alert tone, press the PAGE button again or press any button on the parent unit. Lul...